Godrej Appliances Eyetrace Elite ET-8D12E User Manual

USER MANUAL

ET-8D12E

Digital Video Recorder

Welcome

DVR User’s Installation and Operation Manual

Thank you for purchasing our DVR

This manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series, DVR features and functions as well as a detailed menu tree. Before installation and operation, please read the following safeguards and warnings carefully! Important Safeguards and Warnings:

1. Do not place heavy objects on DVR.

2. Do not let any solid or liquid fall into or infiltrate the DVR.

3. Please brush printed circuit boards

(PCB‟s),

connectors, fans, machine box and so on regularly.

4. Before the dust cleaning, please Switch OFF the power supply and unplug it.

5. Do not disassemble or repair the DVR by yourself. Do not replace the components by yourself. Environment:

1. Please place and use the DVR between 0 – 40 degree Celsius. Avoid direct sunlight. Stay away from heat source.

2. Do not install the DVR in damp environment.

3. Do not use the DVR in smoky and dusty environment.

4. Please ensure that the DVR level installation is in a stable workplace.

5. Please install in ventilated place. Keep the vent clean.

6. Use within the rating input and output scope.

Table of

Cont e nts

1. Product

Introduction.....................................................................................................................................................................................................................................5

1.1 Product overview .................................................................................................................................................................................................................................5

1.2 Main functions .....................................................................................................................................................................................................................................5

2.1 Description of front panel:....................................................................................................................................................................................................................6

2.2 Hard Disk Installation ..........................................................................................................................................................................................................................7

3. Basic

operation.............................................................................................................................................................................................................................................9

3.1 Turn on................................................................................................................................................................................................................................................9

3.2 Turn off ...............................................................................................................................................................................................................................................9

3.3

...................................................................................................................................................................................................................................................9

3.4

Preview..............................................................................................................................................................................................................................................

3.5 Desktop shortcut menu

3.5.1 Main

menu ................................................................................................................................................................................................................................

3.5.2 Video playback

3.5.3 Record

Mode.............................................................................................................................................................................................................................

3.5.4 Alarm

output .............................................................................................................................................................................................................................

3.5.5 PTZ

control ...............................................................................................................................................................................................................................

3.5.6 Color

Settings............................................................................................................................................................................................................................

3.5.7 TV adjust

3.5.8

Logout.......................................................................................................................................................................................................................................

4. Main

Menu................................................................................................................................................................................................................................................. 17

4.1 Main menu

navigation......................................................................................................................................................................................................................

4.2 Recording

function .............................................................................................................................................................................................................................

4.2.1 Recording

Configuration. .........................................................................................................................................................................................................

4.2.2 Video playback

4.2.3 Video backup

4.3 Alarm

Function ..................................................................................................................................................................................................................................

4.3.1 Motion Detect

4.3.2 Video

Blind ...............................................................................................................................................................................................................................

4.3.3 Video

Loss ................................................................................................................................................................................................................................

4.3.4 Alarm

input ...............................................................................................................................................................................................................................

4.3.5 Alarm

4.3.6

Abnormality ..............................................................................................................................................................................................................................

4.4 System setup

4.4.1 General setup

4.4.2 Encode

setup .............................................................................................................................................................................................................................

4.4.3 Network setup

4.4.4 Network service

4.4.5 GUI

display ...............................................................................................................................................................................................................................

4.4.6 PTZ

4.4.7 Serial port setup

4 . 4 .

8 Tour s e t up

4.4.9 Channel

manage ........................................................................................................................................................................................................................

4.5 Management

tools ..............................................................................................................................................................................................................................

4.5.1 Hard disk

management ..............................................................................................................................................................................................................

4.5.2 User

4.5.3 Online

user ................................................................................................................................................................................................................................

4.5.4 TV adjust

4.5.5Auto maintenance

4.5.6 Resume

default..........................................................................................................................................................................................................................

4.5.7

Upgrade.....................................................................................................................................................................................................................................

4.6 System

information ............................................................................................................................................................................................................................

4.6.1 Hard disk information

4.6.2 Code stream

statistics ................................................................................................................................................................................................................

4.6.3 Log information

4.6.4 Edition

4.7 Shut down system

5. FAQs and

Maintenance...............................................................................................................................................................................................................................

5.1

FAQs..................................................................................................................................................................................................................................................

5.2

Maintenance .......................................................................................................................................................................................................................................

Appendix 1.Remote controller

Appendix 2. Mouse

Operation........................................................................................................................................................................................................................

1. Product Introduction

1.1 Product overview

The series DVR is designed especially for security and defense field which is outstanding Digital Surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264 video compression format and G 711A audio compressed format which ensures the high quality image, low error coding ratio and single frame playing. It introduces TCP/IP network technology which achieves the strong network communication ability and telecommunication ability. T he series DVR can be used individually or online applied as a part of a safety surveillance network. With the professional

netwo

rk video surveillance software it achieves the strong network communication ability and telecommunication ability. The series DVR can be applied in the bank, telecom, electric power system, judicial system, factory, storehouse, water conservancy and so on.

1.2 Main functions

Real-time surveillance

· Analog interface and VGA interface (VGA interface is equipped selectively).

· Surveillance function through monitor or display.

Storage

· Special storage format which ensures the data safety.

Compression

· Real time compression which ensures the audio and video signal stable synchronization.

Backup

· Through SATA interface and USB interface such as USB equipment, removable hard disk and so on.

· Through net download the files in the hard disk.

Playback

· Individual real time video recording as well as searching, playback, network surveillance, recording check, downloading and s o on.

· Multi-Playback mode zooms at arbitrary region.

Net operating

· Through net tele-surveillance in the real time.

· Tele-PTZ control.

· Tele-recording and real time playback.

Alarm linkage

· Multi-route relay output which is convenient for the alarm linkage and light control and the sort.

· Protecting circuits at the alarm input and output interface which protects the main machine

fro

m damage.

Communication interface

· RS485 interface which fulfills the PTZ control.

· Standard Ethernet network interface which fulfills the telecommunication function.

Intelligent operating

· Mouse action function.

· Fast copy and paste operating for the same setting.

2. Open-package check and cable connections

2.1 Description of front panel:

( 1

)

Record

Start recording.

( 2

)

Playback/Pause In live mode, press this key to enter playback mode and play the last file. Press it again to pause. Press it the third

time to continue playing.

( 3 )

PTZ

PTZ setting

)

Press this key to pop up the main menu.

( 5 ) Status indicator

To show the working status of the DVR. "IR” is remote control operation indicator; “LOCK” is panel l

ock

indicator; "HDD” is hard disk indicator; "POWER” is power indicator.

(6)

Direction/split/ confirm Keys

In menu mode, select the listed options upward/downward/leftward/rightward; In PTZ, control the dome to rotate upward/downward/leftward/rightward. Enter key confirms the selection an

operation. In live mode, upward and downward is for split-key, nine-split key and sixteen-split key.

In play

back m

ode, lef

tward and r

ightward

is used for rewind and forward

(7)

Exit ke

y Press it to exit from the inferior menu and return to the superior menu.

(8)

USB 2.0 port

Connected to disk and used for system software upgrade or video file backup. Insert the disk after turning off the DVR. Better not connect the mouse here, or it would be abnormal.

(9)

IR receiver

Receive signal from remote control.

Take off the cover Open the DVR

Fix the HDD by

Cover the housing

Fix the housing,

housing scr

een connect the data

2.2 Hard Disk Installation

Before you use the DVR for the first time, the HDD should be installed in, 1/2/4 units of HDD can be installed according to the model of DVR.

Description of rear panel: Rear panel of 4 channel H.264 DVR:

Na me

Descript io n

Video input

Standard BNC port connected with the Camera.

Video output

Connected with the video input of the monitor.

VGA

VGA video signal output port connected with a VGA port of a computer monitor.

Audio output

Connected with earphone or cable speaker.

Audio input port

Connected to audio input

device.

“

485” (AB) External alarm

port

RS485, i

t can connect PTZ or decoder, and can Control PTZ via th

e panel, mouse, remote control and n

etwork.

Connected with alarm input and

output.

USB

Connected to USB Pen-drive or mouse and used for system software upgrade or video file backup.

NET

RJ-45 network port connected to network cable and used for remote browse or control.

Power

Power input is DC 12V/5A (16 Channel DVR). Power input is 12V/3A (4/8 channel DVR).

3. Basic operation

Note: The button in gray display indicates non-support.

3.1 Turn on

Plug the power supply and turn on the power supply switch. Power supply indicator light indicates „turning on‟ of the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode. If the startup time is within the video setting time, the timing video recording function will start up automatically. Then the corresponding channel is shining and the DVR is working normally.

Note:

1. Make sure that the input voltage corresponds with the switch of the DVR power supply.

2. Power supply demands: 220V ±10% /50Hz.

3. Suggest using the UPS to protect the power supply under allowable conditions.

3.2 Turn off

There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switching. Pressing the power supply switch is called hard switching.

Illumination:

· Auto resume after power failure. If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power failure.

· Replace the hard disk. Before replacing the hard disk, the power supply switch in the rear panel must be turned off.

· Replace the battery. Before replacing the battery, the setting information must be saved and the power supply switch in the real panel must be turned off. The

DVR uses button battery. The system time must be checked regularly. If the time is not correct you must replace the battery, we recommend replacing the battery every year and using the same battery type.

Note: The setting information must be saved before replacing the battery, otherwise, information will be lost.

3.3 Login

When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview. There are two user settings. The names are 'admin' and 'guest'. These names have no password. 'Admin' is the super user purview; and 'Guest' permissions are preview and video playback. User 'admin' and 'guest' passwords can be revised, while their permissions

can‟t

be revised. Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the ac count will be locked. (The account can be unlocked through reboot or after half an hour, the account will be unlocked automatically).

For your system security, please modify your password after first login.

Picture 3.1 Login Picture 3.2 Short-cut menu

3.4 Preview

You can right click mouse to choose to switch between the windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window.

3.5 Desktop shortcut menu

In preview mode you can right click mouse to get a desktop shortcut menu. The menu includes: main menu, video playback, video control, alarm output, PTZ control, color setup, TV adjust, shut down system, window switch.

3.5.1 Main menu

When you login, the system main menu is shown as

below

Picture 3.3 Main menu Picture 3.4 video playback Picture 3.5 detect the storage Picture 3.6 Recording backup

3.5.2 Video playback

There are two methods for you to play the video files in the hard disk.

1. In the desktop shortcut menu.

2. Main menu > video recording > video playback.

Note: The hard disk that saves the video files must be set as read-write or read-only state.

[Listed files] Look up the listed files that accord with the searching criteria. [File information] Look up the found file information. [File backup] Backup the chosen file. Click the button and operate as followed.

Note: The storage must be installed before the file backup. If the backup is terminated, the already existing backup can playback individually.

Detect: Detect the storage connected with the DVR such as hard disk or universal disk. Erase: Choose the file to delete and click 'Erase' to delete the file. Stop: Stop the backup. Backup: Click 'Backup' button and the dialog box is popped up. You can choose the backup file according to type, channel and time. Remove: Clear the file information. Add: Show the file information satisfying the set file attributes. Start/Pause: Click the 'Play' button to start the backup and click the 'Pause' button to stop the backup. Cancel: During backup you can exit the page layout to carry out their functions. [File searching]:Search the file according to the searching parameter.

Picture 3.7 File

searching

Butt

Function

Butt Function

Play/pause

Backward

File type: Set the searching file type. Channel: Set the searching

channel

Start Time: Set the searching time scan.

Playback control: Refer to the following sheet for more information.

Operation hint: Displays the function of the cursor place.

NOTE: Frame by frame playback is only performed in the pause playback mode

Special Functions: Accurate playback: Input time (H/M/S) in the time column and then click 'Play'. The system can operate accurate playback according to the searching time.

Local zoom: When the system is in single-window full-screen playback mode, you can drag your mouse in the screen to select a section and then left click mouse to

realize local zoom. You can right click mouse to exit.

3.5.3 Record Mode

Picture 3.8 Recording Control Interface

Stop Volume Slow play Fast play Previous frame Next frame

Previous file Next file Repeat playback Full screen

Please check current channel status: “o” means it is not in recording status “●” means it is in recording status. You can use desktop shortcut menu or click [main menu] > [recording set] to enter the recording control interface.

[Schedule]Record according to the configuration. [Manual] Click the 'All' button and the corresponding channel starts recording, no matter the channel in any state. [Stop] Click the 'Stop' button and the corresponding channel stops recording, no matter the channel in any state.

3.5.4 Alarm output

Picture 3.9 Alarm output Picture 3.10 PTZ Setup

Please check current channel status: “o” means it is not in alarming status “●” means it is in alarming status. You can use

des

ktop shortcut menu or click [Main menu] >

[alarm output] to enter the alarm output interface.

[Configuration] Alarm is 'on' according to the configuration. [Manual] Click the 'All' button and the corresponding channel is alarming, no matter the channel in any state. [Stop] Click the 'Stop' button and the corresponding channel stops alarming, no matter the channel in any state.

3.5.5 PTZ control

Operation interface is as follows. The functions include: PTZ direction control step, zoom, focus, iris, setup operation, tour between spots, trial tour, boundary scan, assistant switch, light switch, level rotation and so on. Note

1. Decoder A(B) line connects with DVR A(B) line. The connection is right.

2. Click [main menu] > [system configuration] > [PTZ setup] to set the PTZ parameters.

3. The PTZ functions are decided by the PTZ protocols.

[Step] Set the PTZ rotation range, Default range 1-8. [Zoom]click +/ - button to adjust the zoom multiple of the camera. [Focus]click +/ - Button to adjust the focus of the camera. [Iris] click +/ - Button to adjust the iris of the camera. [Direction control] Control the PTZ rotation, 8 directions control is supportive, (4 directions in front panel is supportive). [High speed PTZ] Full screen shows channel image, left press mouse and control PTZ to rotate, then rotate the mouse to adjust the zoom multiple of the camera. [Setup] Enter the function operation menu. [Window switch] Switch between different windows.

+ 28 hidden pages

Godrej Appliances Eyetrace Elite ET-8D12E User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual