GODOX WMicS1 Instruction Manual

神牛微信公众号

Follow Wechat Public Account

深圳市神牛摄影器材有限公司

地址: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋
电话: [phone](8062) 传真: [phone]
邮箱: [e-mail]

GODOX Photo Equipment Co., Ltd.

Add: Building 2, Yaochuan Industrial Zone,Tangwei Community, Fuhai
Street, Bao’an District, Shenzhen 518103, China
Tel: [phone](8062) Fax: [phone]
E-mail: [e-mail]

godox.com

Made In China

说明手册

Instruction Manual

UHF无线麦克风系统

UHF Wireless Microphone system

前言

欢迎使用UHF无线麦克风系统⸺WMicS1，本产品非常适用于摄影录制，现场采访及语音
录制等场合。请仔细阅读本说明书，以便能正确的操作，发挥本产品的优越性能。

产品特点

•

UHF频率范围：514MHz-596MHz

•

96个无线频道可选，有效减少热频干扰

•

无线距离最大可达100m

•

OLED显示屏提供各项参数设置

•

3.5mm耳机实时监听

•

输出音量控制，提供静音功能

•

发射功率可调节

•

一个接收器可同时连接两个发射器

•

两种供电方式

(注：最大支持频率为514MHz-596MHz，96个无线频道在此频率范围中选择，会存在部分
频率没有利用的情况。)

警告

请勿私自拆卸产品，如产品出现故障须由本公司或授权的维修人员进行检查维修。
请保持干燥：请勿用湿手接触产品，亦不可将产品浸入水中或暴露于雨中。
请勿让儿童接触本产品。
请勿在易燃易爆环境中使用。在这些场合下，请注意相关警告标识。
请勿放置在超过40度的高温环境中。
若发生任何故障，请立即关闭电源。
使用电池的注意事项：

只能使用本手册中列出的电池。 请勿混用新旧电池或不同类型的电池。

­请仔细阅读并遵守由厂商提供的警告或指示。

­切勿使电池短路或拆卸电池。

­切勿将电池投入火中或加热升温。

­切勿试图以反方向安装电池。

­当电量用尽时，电池容易漏液。 所以为了避免产品受损，请在长期不使用本产品或电量用尽时取出电池。

­如果受损电池中的液体接触到皮肤或衣服，请立即用大量清水冲洗。

-

部件名称

腰包发射器（TX1）

1

2

3

4

5

1. 天线

2. 3.5mm 音频线输入接口

3. Power 指示灯

- 绿灯：电量充足

- 红灯：电量低，需更换电池

4. 电源 / 静音键

5. 菜单键

OLED显示屏：

1. 通讯频段

2. 无线组别及频道

3. 发射功率指标

4. 拾音 / 静音图标

5. 输入音量显示

6. 电池电量显示

6

7

8

9

10

2

6. 麦克风输入接口

7. Audio 指示灯

- 绿灯：拾音模式

- 红灯：静音模式

8. OLED 显示屏

9. 菜单 +

10. 菜单 -

3 4 5

CH-B-05

578.030MHZ

1

11

12

13

15

14

11. USB Type-C

12. 金属背夹接口

13. 电池盒 - 两节 5 号电池

14. 产品标签贴

15. 1/4 冷靴接口

6

便携接收器（RX1）

标配物品

1

2

3

4

5

1. 天线

2. 3.5mm 音频线输出接口

3. Power 指示灯

- 绿灯：电量充足

- 红灯：电量低，需换电池

4. 电源 / 返回键

5. 菜单键

OLED显示屏：

1. A 组射频信号

2. B 组射频信号

3. 电池电量显示

4. A 组接收频道

5. B 组接收频道

6. 同步发射器电量及输入音量

6

7

8

9

10

6. 3.5mm 耳机监听接口

7. RF 指示灯

- 绿灯：RF 信号强

- 红灯：RF 信号弱或已断开

8. OLED 显示屏

9. 音量 +/ 菜单 +

10. 音量 -/ 菜单 -

A

RCVR-A

4

CH-13

A B

6

1

B

11 14

12

13

2

RCVR-B
CH-05

15

11. USB Type-C

12. 金属背夹接口

13. 电池盒 - 两节 5 号电池

14. 产品标签贴

15. 1/4 冷靴接口

3

5

发射器腰夹接收器

名称

腰包发射器

型号 标配物品

TX1

便携接收器 RX1

UHF无线麦克
风系统组合一

UHF无线麦克
风系统组合二

WMicS1
Kit 1

WMicS1
Kit 2

3.5mm 插头音频线

1/4”冷靴

3.5mm 卡侬头音频线

发射器 x1

腰夹 x1

全向型领夹式麦克风×1

接收器 x1

腰夹 x1

3.5mm插头音频线×1

3.5mm卡侬头音频线×1
1/4”冷靴 x1

发射器 x1

接收器 x1

全向型领夹式麦克风×1

3.5mm插头音频线×1

3.5mm卡侬头音频线×1
1/4”冷靴 x1

发射器 x2 腰夹 x3接收器 x1
全向型领夹式麦克风×2

3.5mm插头音频线×1

3.5mm卡侬头音频线×1

腰夹 x2

全向型领夹式

麦克风

1/4”冷靴 x1

可搭配产品

无线手持麦克风发射器

WH-M1

卡侬口插接发射器

TX3-XLR

供电方式

两种供电方式

TYPE-C 接口（5V）

两节 AA(5 号 ) 干电池

使用说明

一、发射器设置

• 开关机：长按2秒电源开关按键即可开/关机；短按电源键开关静音。

• GRP/CH/RF设置：长按菜单键进入设置界面，再短按菜单键切换下一个设置。

CH: 05

GRP: A

RF power: L

- GRP组别设置：选中GRP，按+/-可选A/B组别。

- CH频道设置：选中CH，按+/-可设置CH，有01-48个频道可选择。

- RF功率设置：选中RF power切换H/L功率。

Version

1. 10 13

• 软件版本：短按+/-显示Version时，表示软件的版本。

BackLight
ON

• 背光时间：短按 +/- 至显示屏显示 BackLight，再长按菜单键背光时间跳动，短按 +/- 键选
择背光时间：ON 常亮，OFF 常闭，Delay10S/30S/60S。

Restore
Default

• 恢复出厂设置：短按 +/- 至显示屏显示 Restore Default ，再长按菜单键即可进行恢复出厂
设置。

Key lock
Long press “+”
to unlock

• 按键锁：在使用时需要进入按键免误按时，可以启用按键锁，在非设置状态下长按“+”进
入锁定状态，再次长按“+”进行解锁。

OLED Light
5

• 显示屏亮度设置：短按 +/- 至显示屏显示 OLED Light，再长按菜单键选中 OLED Light 对
应的亮度级别。 短按 +/- 键选择亮度级别， 级别：1-8 八级。

二、接收器设置

• 开关机：长按 2 秒电源开关按键即可开 / 关机；

• RCVR/CH/VOL 设置：当需要设置 A 组别参数时，在显示 A 组别参数时长按菜单键进
入设置界面，再短按菜单键切换下一个设置，需要设置 B 组别参数时，则需在显示 B 组别参
数时长按菜单键进入设置界面。

A B

RCVR-A ON
CH: 01 VOL: 25

514. 560MHz

- RCVR开关设置：选中RCVR，按+/-可选ON/OFF。

- CH频道设置：选中CH，按+/-可设置CH，有01-48个频道可选择。

- VOL 设置：选中VOL，按+/-可设置VOL，有00-30个音量可选择。
使用时，将接收器与发射器设置成相同的频道，即可录音和实时监听。

A B

OLED Light
1

A B

BackLight
ON

• 背光时间：短按 +/- 至显示屏显示 BackLight，再长按菜单键背光时间跳动，短按 +/- 键选
择背光时间：ON 常亮，OFF 常闭，Delay10S/30S/60S。

A B

Restore
Default

• 恢复出厂设置：短按 +/- 至 显示屏显示 Restore Default ，再长按菜单键即可进 行恢复出厂
设置。

A B

Key lock
Long press “+”
to unlock

• 按键锁：在使用时需要进入按键免误按时，可以启用按键锁，在非设置状态下长按“+”进
入锁定状态，再次长按“+”进行解锁。

• 显示屏亮度设置：短按 +/- 至显示屏显示 OLED Light，再长按菜单键 OLED Light 对应的
亮度值跳动， 短按 +/- 键选择亮度级别，级别：1-8 八级。

A B

Output Mode
Stereo

• 输出模式：分为 Stereo（立体声）和 Mono（单声道）两种模式。短按 +/- 键切换至 Output
mode，再长按菜单键即可进行两种声道切换。当输出模式是 Mono（单声道）时，左声道和右
声道音频将被混合输出；当输出模式是 Stereo（立体声），左（A 组）和右（B 组）音频声道输出
将独立；系统默认为 Mono（单声道）。

A B

Version

1. 10 13

• 软件版本：短按 +/- 显示 Version 时，表示软件的版本。

三、发射器接口：

LINE IN：连接外界音频信号输入。
MIC：连接领夹麦克风。

使用操作

四、接收器接口：

OUTPUT:连接外界音频信号输出。
PHONES：连接耳机线。

发射器

① 将全向型领夹式麦克风插入发射器的“MIC”接口；
② 打开发射器，设置相应参数；
③ 用腰夹将发射器夹在腰带上或将发射器直接放进口袋里。

接收器

①

将 1/4”冷靴连接到接收器，并将其安装在相机 / 摄影设备上；

②

将 3.5mm 插头音频线的一端插入接收器的“OUTPUT”接口，另一端插入相机的“MIC”
接口；

③

打开接收器，设置相应参数。

注意：设置参数时，需将发射器与接收器设置相同的组别和频道；
一个接收器连接两个发射器使用时，必须A发射器设置在A组别使用，B发射器设置在B组别
使用。

规格参数

名称 腰包发射器 TX1 便携接收器 RX1

频道组 A/B

频道数 96(A组48；B组48)

RF频率范围 514MHz - 596MHz

振荡器类型 晶体控制锁相环合成器

音频频率范围 40Hz - 18KHz

声音延迟 12ms

天线 1/4λ

音频输入接口 3.5mm接口

供电

工作温度范围 0℃-50℃

信噪比 ≈70dB

接收灵敏度 \

失真 \

尺寸 63*190*22mm

净重 70g 80g

USB接口 USB Type -C

电池

两节AA(5号)电池

A/B

96(A组48；B组48)

514MHz - 596MHz

晶体控制锁相环合成器

40Hz - 18KHz

12ms

1/4λ

3.5mm接口

USB Type -C

两节AA(5号)电池

0℃-50℃

≈70dB

-95dBm

0.5%以下

63*190*25mm

故障排除

如不能接收到音频信号，请检查电池是否正确安装以及是否打开发射器电源；发射器和

•
接收器是否设置在同一组别和频道；麦克风及耳机是否已正确牢固连接到位；功能模式
是否设置正确。
检查发射器是否设置的静音。

•
如您的发射器受到他人干扰，改变发射器和接收器的频道设置即可。

•
如您发现发射音频距离有限或者有漏发现象，请检查是否电池耗尽，请尝试更换电池。

•

维护保养

避免跌落：如果受到强烈碰撞或振动， 发射器和接收器可能会发生故障。

保持干燥：本产品是非防水产品，如果将其浸入水中或放置于高湿度的环境中将可能发生故

障。 内部构造生锈可能会导致无法修理的损害。

避免温度骤变：温度的突变，诸如在寒冷天进出温暖的大楼将可能会使发射器和接收器内部
结露。 为避免结露， 请将发射器和接收器事先装入手提袋或塑料包内， 以防温度突变。

远离强磁场：无线电广播发射机等设备产生的强静电或强磁场可能会干扰本产品正常工作。
1 年保修， 消耗品如领夹麦克风等， 不在 1 年保修范围。

经发现擅自检修此设备， 将取消一年保修期， 维修需要收取相关费用。

如果本品出现故障或者被水淋湿， 在专业人员维修后方可继续使用。

如有技术更改， 恕不另行通知。

Forward

Thank you for purchasing UHF Wireless Microphone system-WMicS1. These products
are suitable for video recording, journalistic shooting, audio recording, etc. Please read this
manual carefully before using to make sure the correct operation and exert the optimum
function.

Features:

UHF Frequency Range: 514MHz-596MHz

•
There are 96 wireless channels which can be freely switched without interference

•
High and stable sound quality like broadcast

•
The maximum wireless distance up to 100m

•
With OLED display to show the parameters setting

•
Achieve real-time monitoring with 3.5mm earphone

•
With output volume control and silence function

•
The power of transmitter is adjustable

•
Support two transmitters and one receiver to work simultaneously

•
Two power supply mode

•
(Note: as the max. support frequency is 514MHz-596MHz which includes the 96 wireless
channel's frequency, there are parts of frequency may not be ultilized.)

Warning

Do not disassemble. Should repairs become necessary, this product must be sent to an
authorized maintenance center.
Always keep this product dry. Do not use in rain or in damp conditions.
Keep out of reach of children.
Do not use the flash unit in the presence of flammable gas. In certain circumstance,
please pay attention to the relevant warnings.
Do not leave or store the product if the ambient temperature reads over 40℃.
Turn off the flash trigger immediately in the event of malfunction.
Observe precautions when handling batteries.

Use only batteries listed in this manual. Do not use old and new batteries or batteries of different types

-

at the same time.

Read and follow all warnings and instructions provided by the manufacturer.

-

Batteries cannot be short-circuited or disassembled.

-

Do not put batteries into a fire or apply direct heat to them.

-

Do not attempt to insert batteries upside down or backwards.

-

Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove

-

batteries when the product is not used for a long time or when batteries run out of charge.

Should liquid from the batteries come into contact with skin or clothing, rinse immediately with fresh

-

water.

Names of Parts

Body-pack Transmitter（TX1）

1

2

3

4

5

1. Antenna

2. 3.5mm Audio

Line In Port

3. Power Indicator

-Green light: full battery level

-Red light: Low battery level,

replace the batteries

4. Power Source/Mute

Button

5. Menu Button

OLED Display：

1. Communication Frequency

2. Wireless Group and Channel

3. Transmitting Power Icon

4. Pick-up Sound/Silent Icon

5. Input Volume Indicator

6. Battery Level Indicator

6

7

8

9

10

6. MicrophoneInput Port

7. Audio Indicator

-Green light: Sound

directivity mode

-Red light: Silent mode

8. OLED Display

9. Menu +

10. Menu -

15

14

11

12

13

11. USB Type-C Port

12. Metal Clip Port

13. Battery Holder

-2×AA Battery

14. Product Label

15. 1/4"Shoe Mount Port

3 4 5

6

2

CH-B-05

578.030MHZ

1

Portable Receiver（RX1）

Included Item

1

2

3

4

5

1. Antenna

2. 3.5mm Audio

Output Port

3. Power Indicator

-Green light: full battery level

-Red light: Low battery level,

replace the batteries

4. Power Source/Mute

Button

5. Menu Button

OLED Display：

1. A Group Frequency Signal

2. B Group Frequency Signal

3. Battery Level Indicator

4. A Group Receive Channel

5. B Group Receive Channel

6. Transmitter’ s Battery Level

and Volume

6

7

8

9

10

11 14

12

13

15

Transmitter

Receiver

Belt Clip

Name Model

6. 3.5mm Earphone

Monitoring Port

7. RF Indicator

-Green light: Strong

RF signal

-Red light: Week or

disconnected RF signal

8. OLED Display

9. Volume +/Menu +

10. Volume -/Menu -

1

A

RCVR-A

4

CH-13

A B

6

B

2

RCVR-B
CH-05

11. USB Type-C Port

12. Metal Clip Port

13. Battery Holder

-2×AA Battery

14. Product Label

15. 1/4"Shoe Mount Port

3

5

Body-pack Transmitter TX1

Portable Receiver RX1

UHF Wireless Microphone
System Kit 1

UHF Wireless Microphone
System Kit 2

WMicS1 Kit 1

WMicS1 Kit 2

1/4"Shoe Mount Adapter

3.5mm Audio Cable

XLR To 3.5mm Audio Cable

Included Items

Transmitter x1
Omnidirectional Lavalier
Microphone×1

Receiver x1

3.5mm Audio Cable×1
XLR To 3.5mm Audio Cable×1
1/4"Shoe Mount Adapter x1

Transmitter x1
Receiver x1
Omnidirectional Lavalier
Microphone×1

3.5mm Audio Cable×1
XLR To 3.5mm Audio Cable×1
1/4"Shoe Mount Adapter x1

Transmitter x2
Receiver x1
Omnidirectional Lavalier
Microphone×2

3.5mm Audio Cable×1
XLR To 3.5mm Audio Cable×1
1/4"Shoe Mount Adapter×1

Omnidirectional Lavalier

Microphone

Belt Clip x1

Belt Clip x1

Belt Clip x2

Belt Clip x3

Recommended Combination

OLED Light
5

• Display brightness setting: short press +/- button until OLED light is displayed on the
panel. Then, long press the menu button to choose the corresponding brightness level of
OLED light. Short press +/- button to choose brightness from 1 to 8 levels.

Wireless Handheld Microphone

Transmitter WH-M1

Plug-On XLR Transmitter TX3-XLR

Power Supply

There are two modes of power supply

TYPE-C Port(5V)

2 AA Batteries

Operation Instruction

Transmitter Setting

• Power on/off: Long press the power switch for 2 seconds to power it on or off. Short

press the power switch to make it silent.

• GRP/CH/RF Setting: Long press the menu button to enter the setting interface. Then,

short press the menu button to switch the next setting.

CH: 05

GRP: A

RF power: L

- GRP Group setting: choose GRP and press +/- to choose A or B group.

- CH Channel setting: choose CH and press +/- to set channel from 01 to 48.

- RF Power setting: choose RF power to switch H/L power.

Version

1. 10 13

• Software version: short press +/- button until Version is displayed, which means the
version of software.

BackLight
ON

• Backlighting time: Short press +/- until Back Light is displayed on the LCD panel.
Then,long press the menu button and the backlighting time will be blinking. Short press
the +/-button to choose backlighting time: ON means lighting and OFF means off.
Delay10S/30S/60S.

Restore
Default

• Restore factory settings: short press the +/- button until Restore Default is displayed.
Then, long press the menu button to restore factory settings.

Key lock
Long press “+”
to unlock

• Button lock: To avoid pressing down mistakenly, it is recommended to use the button
lock. Long press the "+" to enter the locking state and long press it again to unlock.

Receiver Setting

• Power On/Off: long press the button for 2 seconds to power it on or off.

• RCVR/CH/VOL setting: to set channel A's parameters, long press the menu button

to enter setting interface during the A's parameters are displayed. Then, short press the
menu button to switch to the next setting. To set channel B's parameters, long press the
menu button to enter setting interface during the B's parameters are displayed.

A B

RCVR-A ON
CH: 01 VOL: 25

514. 560MHz

- RCVR Power switch setting: select RCVR and press +/- button to choose ON/OFF.

- CH Channel setting: select CH and press +/- button to choose channel from 01 to 48.

- VOL Setting: select VOL and press +/- button to choose volume from 00 to 30.

Please set the receiver and transmitter to the same channel during usage, thus achieving
recording and real-time monitoring.

A B

OLED Light
1

• Display brightness setting: short press +/- button until OLED light is displayed on the

panel. Then, long press the menu button and the corresponding brightness value of OLED
light will be blinking. Short press +/- button to choose brightness from 1 to 8 levels.

A B

Output Mode
Stereo

• Output mode: there are Stereo mode and Mono mode. Short press +/- button to enterout-

put mode. Then, long pressthe menubutton to switch the two channels. When in
Monochannel output, the sound of left channel and right channel will be output simultane­ously. When in Stereo channel output, the sound of left channel(A group) and right
channel(B group) will be output independently. The default channel of this system is Mono
channel.

A B

Version

1. 10 13

A B

BackLight
ON

• Backlighting time: Short press +/- until Back Light is displayed on the LCD panel. Then,
long press the menu button and the backlighting time will be blinking. Short press the +/­button to choose backlighting time: ON means lighting and OFF means off.
Delay10S/30S/60S.

A B

Restore
Default

• Restore factory settings: short press the +/- button until Restore Default is displayed.
Then, long press the menu button to restore factory settings.

A B

Key lock
Long press “+”
to unlock

• Button lock: To avoid pressing down mistakenly, it is recommended to use the button lock.
Long press the "+" to enter the locking state and long press it again to unlock.

Transmitter Port

LINE IN: to connect with external audio
signal input.
MIC: to connect with lavalier microphone.

Receiver Port

OUTPUT: to connect with external audio
signal output.
PHONES: to connect with earphone cable.

Operation

• Software version: short press +/- button until Version is displayed, which means the

version of software.

Transmitter

Insert the omnidirectional lavalier microphone into the transmitter’s MIC port.

①

Turn on the transmitter to set the relevant parameters.

②

Clip the transmitter onto the belt or put it into your pocket.

③

Receiver

Connect the 1/4” cold shoe onto the receiver, and install them on the camera or shooting

①

equipment.
Insert one end of the 3.5mm cable into the receiver’s OUTPUT port and the other end into

②

camera’s MIC port.
Turn on the receiver to set relevant parameters.

③

Note: Please set the group and channels of transmitter and receiver to the same when setting
parameters.
When a receiver is connecting to two transmitters, A transmitter must be set and used in A
group while B transmitter must be set and used in B group.

Technical Data

Name Body-pack Transmitter TX1 Portable Receiver RX1

Channel Group

Selectable Channel

RF Frequency Range

Oscillator Type

Audio Frequency Range

Sound Delay

Antenna

Audio Input Port 3.5mm Port

Power Supply

Working Temperature Range

Signal Noise Ratio

Receive Sensitivity

Distortion

Size

Net Weight 70g

USB Port USB Type-C

Battery

A/B

96(Group A: 48; Group B: 48)

514MHz - 596MHz

Crystal Controlled PLL
Synthesizer

40Hz-18KHz

12ms

1/4λ

Two AA batteries

0℃-50℃

≈70dB

\

\

63*190*22mm

A/B

96(Group A: 48; Group B: 48)

514MHz - 596MHz

Crystal Controlled PLL
Synthesizer

40Hz-18KHz

12ms

1/4λ

3.5mm Port

USB Type-C

Two AA batteries

0℃-50℃

≈70dB

-95dBm

Below 0.5%

63*190*25mm

80g

Troubleshooting

•

Unable to receive audio signal. Make sure batteries are installed correctly and Power
Switch is turned on. Check if the transmitter and the receiver are set to the same

•

channel, if the microphone or earphone is well connected, or if the devices are set to the

•

correct mode.
Check if the transmitter is set to silent mode or not.

•

Signal disturbance or shooting interference. Change a different channel of the transmit­ter and receiver.
Operating audio distance limited or signal missing. Check if batteries are exhausted. If
so, replace them.

Maintenance

Avoid sudden drops. The device may fail to work after strong shocks, impacts, or excess
stress.

Keep dry. The product isn’t water-proof. Malfunction, rust, and corrosion may occur and go
beyond repair if soaked in water or exposed to high humidity.

Avoid sudden temperature changes. Condensation happens if sudden temperature
changes such as the circumstance when taking the transmitter and receiver out of a
building with higher temperature to outside in winter. Please put the transmitter and
receiver in a handbag or plastic bag beforehand.

Keep away from strong magnetic field. The strong static or magnetic field produced by
devices such as radio transmitters leads to malfunction.
This product, except consumables e.g. lapel microphone, is supported with a one-year
warranty.

Unauthorized service will void the warranty.

If the product had failures or was wetted, do not use it until it is repaired by professionals.
Changes made to the specifications or designs may not be reflected in this manual.