Godox Ving V860N-II User Manual [ru]

TTL

锂电机顶闪光灯

Pioneering Camera FlashTTL Li-ion

For Nikon

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.com

705-V8602N-00

Made In China

INSTRUCTION MANUAL 说明手册

中英文双语 / Chinese English Bilingual

在使用本产品之前：

请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将

来查询参考。

Before using this product:

Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference.

Foreword

For Your Safety

Thank you for purchasing this product.

This V860IIN camera flash applies to Nikon DSLR series cameras

and is compatible with i-TTL autoflash. With this i-TTL compatible

flash, your shooting will become simpler. You can easily achieve a

correct flash exposure even in complex light-changing environments.

This camera flash features:

● GN60 (m ISO 100, @200mm). 22 steps from 1/1 to 1/128.

● Pro 2000mAh Li-ion Battery-max.1.5s recycle-650 full power pops.

● Fully support Nikon i-TTL camera flash. Workable as Master or

Slave unit in a wireless flash group.

● Use dot-matrix LCD panel to make clear and convenient

operations.

● With built-in 2.4GHz wireless remote system to support

transmitting and receiving.

● Provided multiple functions, include HSS (up to 1/8000s), FEC, etc.

● Use optional FT-16S to adjust flash parameters & trigger the flash.

● Stable consistency and color temperature with good even lighting.

● Support with firmware upgrade.

Always keep this product dry. Do not use in rain or in damp conditions.

This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.

Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it.

Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur. When taking pictures for babies, keep the flash unit at least 1 meter (3.3 feet) away from them. Using bounce flash to reduce light intensity is also recommended.

Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.

Do not leave or store the flash unit in places where the ambient temperature reads over 50°C (e.g. in automobile). Otherwise the electronic parts may be damaged.

- 27 - - 28 -

Pioneering Li-ion Camera Flash

Conventions used in this Manual

● This manual is based on the assumption that both the camera

and camera flash’s power switches are powered on.

● Reference page numbers are indicated by “p.**”.

● The following alert symbols are used in this manual:

The Caution symbol gives supplemental information.

The Note symbol indicates a warning to prevent shooting

problem.

Contents

Foreword

For Your Safety

Name of Parts

Body

Control Panel

Dot-matrix LCD Panel

What's in the Box of V860IIN Kit?

What's in the Box of V860IIN (only flash unit)?

Separately Sold Accessories

Battery

Attaching to a Camera

Power Management

Flash Mode — i-TTL Autoflash

FEC (Flash Exposure Compensation)

High-Speed Sync

Second-Curtain Sync

Flash Mode — M: Manual Flash

Flash Mode — RPT: Stroboscopic Flash

Wireless Flash Shooting: Optic Transmission

Wireless Settings

Setting Master Unit's Flash Mode

Setting the Communication Channel

i-TTL: Fully Automatic Wireless Flash Shooting

M: Wireless Flash Shooting with Manual Flash

RPT: Wireless Flash Shooting with Manual Flash

Wireless Flash Shooting: Ratio (2.4G) Transmission

Other Applications

Wireless Control Function

Sync Triggering

Modeling Flash

Auto Focus Assist Beam

Bounce Flash

Creating a Catchlight

ZOOM: Setting the Flash Coverage and Using the Wide Panel

Low Battery Indicator

C.Fn: Setting Custom Functions

Protection Function

Technical Data

Troubleshooting

Firmware Upgrade

Compatible Camera Models

Maintenance

- 29 - - 30 -

Name of Parts

● Body

01. Catchlight Panel

02. Built-in Wide Panel

03. Flash Head

04. Optic Control Sensor

05. Focus Assist Beam

06. Sync Cord Jack

07. Wireless Control Port

● LCD Panel

(1)i-TTL Autoflash

Zoom : zoom display (Page 47)

: Automatic

: Manual(Page 38)

i-TTL : i-TTL autoflash

: Flash exposure

compensation (Page 36)

Flash exposure compensation amount

● The display will only show the settings currently applied.

● The functions displayed above function buttons 1 to 4, such

as and , change according to settings’ status.

SYNC

● When a button or dial is operated, the LCD panel

illuminated.

08. Hotshoe

09. Dot-marix LCD Panel

10. Lock Ring

11. Battery Compartment

(2)M Manual Flash

12. USB Port

13. Slave Flash Ready Indicator

Focus length (Page 47)

: High-speed sync

(Page 37)

: Second curtain sync (Page 37)

F : Aperture (Page 36)

Distance indicator display

Effective flash range (Page 36)

M : Manual flash

Manual flash output

RST

SET

23 15 18 17 16

(3)Multi Flash

RPT : Stroboscopic flash

Number of flashes

Flash frequency

● Control Panel

14. <MODE> Mode Selection

Button / Lock button

15. < >Wireless Selection

Button

16. Select Dial

17. <SET> Set Button

18. ON/OFF Power Switch

- 31 - - 32 -

19. < > Test Button / Flash

Ready Indicator

20. Function Button 1

21. Function Button 2

22. Function Button 3

23. Function Button 4

(4) Radio Transmission Shooting/Optic Transmission Shooting

● Master Unit

Flash mode

: Group flash (radio transmission)Gr

: Radio transmission

wireless shooting

: Optic transmission

wireless shooting

FEC

● Separately Sold Accessories

The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects:

X1N TTL wireless flash trigger, FT-16S power & trigger control, Mini

softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc.

Channel

● Slave Unit

: Slave icon

Firing group

: Slave

● What’s in the Box of V860IIN Kit?

1. Flash Unit　2. Li-ion Battery Pack　3. Battery Charger　

4. Battery Charger Cable　5. Mini Stand　

6. Protection Case　7. Instruction Manual

● What’s in the Box of V860IIN (only flash unit)?

1. Flash Unit　5. Mini Stand　6. Protection Case　7. Instruction Manual

Battery

● Features

1. This flash unit uses Li-ion polymer battery which has long runtime. The available charge-and-discharge times are 500.

2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit.

3. Take only 2.5 hours to fully charge the battery by using the standard battery charger.

● Cautions

1. Do not short circuit.

2. Do not expose to rain or immerse into water. This battery is not water proof.

3. Keep out of reach of children.

4. No over 24 hours’ continuous charging.

5. Store in dry, cool, ventilated places.

6. Do not put aside or into fire.

7. Dead batteries should be disposed according to local regulations.

8. If the battery had ceased using for over 3 months, please make a full recharge.

● Loading and Unloading the Battery

To load the battery, push the

1 battery compartment cover

downward and open it.

According to the triangle sign

2 on the battery pack, insert it

- 33 - - 34 -

into the compartment until a white knob locks the battery with a click sound.

+ 9 hidden pages