TTL
锂电圆头机顶闪光灯
TTL Li-ion Round Head Camera Flash
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
705-V1F000-00
Made In China
INSTRUCTION MANUAL
说明手册
在使用本产品之前：
请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将
来查询参考。
Before using this product:
Please read this user manual carefully in order to ensure your safety
and the proper operation of this product. Keep for future reference.
Foreword
Warning
Thank you for purchasing this product.
This V1F camera flash applies to FUJIFILM series cameras and is
compatible with TTL autoflash. With this TTL compatible flash, your
shooting will become simpler. You can easily achieve a correct flash
exposure even in complex light-changing environments. This camera
flash features:
● With round flash head to achieve soft, even and more creative light
effects. It has a 2W LED modeling lamp, which can be used off
the camera.
● 76Ws power output at the max step. 81 steps from 1/1 to 1/128.
● 6 max 480Pro 2 00mAh Li-ion Battery- .1.5s recycle- full power pops.
● Fully support FUJIFILM TTL camera flash. Workable as Master or
Slave unit in a wireless flash group.
● Use dot-matrix LCD panel to make clear and convenient
operations.
● With built-in 2.4GHz wireless remote system to support
transmitting and receiving.
● Provided multiple functions, include HSS (up to 1/8000s), FEC,
FEB, etc.
● Stable consistency and color temperature with good even lighting.
● Support with firmware upgrade.
Always keep this product dry. Do not use in rain or in damp
conditions.
Do not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
Keep out of reach of children.
Stop using this product if it breaks open due to extrusion, falling
or strong hit. Otherwise, electric shock may occur if you touch
the electronic parts inside it.
Do not fire the flash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur.
Do not use the flash unit in the presence of flammable gases,
chemicals and other similar materials. In certain circumstance,
these materials may be sensitive to the strong light emitting
from this flash unit and fire or electromagnetic interference may
result.
Do not leave or store the flash unit if the ambient temperature
reads over 50℃. Otherwise the electronic parts may be
damaged.
Turn off the flash unit immediately in the event of malfunction.
- 29 - - 30 -
Pioneering TTL Li-ion Round Head Camera Flash
Conventions used in this Manual
● This manual is based on the assumption that both the camera
and camera flash’s power switches are powered on.
● Reference page numbers are indicated by “p.**”.
● The following alert symbols are used in this manual:
The Caution symbol gives supplemental information.
The Note symbol indicates a warning to prevent shooting
problem.
Contents
Foreword
29
Warning
30
Name of Parts
33
Body
Control Panel
Dot-matrix LCD Panel
LCD Panel in Three Modes
What's in the Box of V1F Kit?
Separately Sold Accessories
Battery
37
LED Modeling Lamp
38
Attaching to a Camera
38
Power Management
38
Flash Mode — TTL Autoflash
39
FEC (Flash Exposure Compensation)
High-Speed Sync
Second-Curtain Sync
M: Manual Flash
41
Multi: Stroboscopic Flash
42
Wireless Flash Shooting: Radio (2.4G) Transmission
43
Wireless Settings
Group Mode Selection
Setting the Communication Channel
Wireless ID Settings
Scan the Spare Channel
TTL: Fully Automatic Wireless Flash Shooting
M: Wireless Flash Shooting with Manual Flash
Multi: Wireless Flash Shooting with Manual Flash
Other Applications
50
Sync Triggering
Auto Focus Assist Beam
Bounce Flash
ZOOM: Setting the Flash Coverage
Low Battery Indicator
C.Fn: Setting Custom Functions
52
Protection Function
53
Technical Data
54
Troubleshooting
55
Firmware Upgrade
56
Compatible Camera Models
56
Maintenance
56
- 31 - - 32 -
Name of Parts
01
● LCD Panel
(1)TTL Autoflash
Zoom : zoom display (Page 51)
: Automatic
: Manual(Page 41)
TTL : TTL autoflash
Focus length (Page 1)5
: High-speed sync
(Page 40)
02
04
03
● Body
01. Flash Head
02. LED Modeling Lamp(01~10)
03. Wireless Sensor
04. Focus Assist Beam
05. Sync Cord Jack
06. Type-C USB Port
23
22
12
17
14
11
05
06
07
08
07. Battery Remove Button
08. Hotshoe
09. LCD Panel
10. Hotshoe Fixing Buckle
11. Lithium Battery
18
21 20
09
Distance indicator
10
Flash exposure
compensation amount
display
● The display will only show the settings currently applied.
● The functions displayed above function buttons 1 to 4, such
SYNC
as and <M/A/B/C/D> , change according to settings’
status.
● When a button or dial is operated, the LCD panel illuminated.
(2)M Manual Flash
M : Manual flash
24
25
13
16
15
Manual flash output
(3)Multi Flash
Multi : Stroboscopic flash
● Control Panel
12. <MEN U>Flash Menu
Button/Locking Button
13. < >Wireless Selection
Button
14. Select Dial
15. Set Button
16. ON/O FF Power Switch
17. < > Test Button / Flash
Ready Indicator
19
Setting
19. <MOD E>Mode Selection
Button
20. < >Modeling Lamp Setting
21. <+/->Power Output
22. Function Button 1
23. Function Button 2
24. Function Button 3
25. Function Button 4
Number of flashes
Flash frequency
18. <ZOO M> Focus Length
- 33 - - 34 -
(4) Radio Transmission Shooting
● Master Unit
Flash mode
: Radio transmission
wireless shooting
● What’s in the Box of V1F Kit?
1. Flash Unit 2. Lithium Battery 3. USB Battery Charger
4. USB Cable 5. Charger 6. Mini Stand
7. Protection Case 8. Instruction Manual
● Slave Unit
: Slave icon
● LCD Panel in Three Modes
● Attached to the Camera
● 2.4G Radio Transmission: As a Master Unit
Firing group
Channel
: Slave
1 2
5
6
3
4
7
● Separately Sold Accessories
The product can be used in combination with the following accessories
sold separately, so as to achieve best photography effects:
XProF & X1T-F TTL wireless flash trigger, AK-R1 accessory kit for
round flash head, etc.
● 2.4G Radio Transmission: As a Slave Unit
- 35 - - 36 -
Battery
● Features
1. This flash unit uses Li-ion battery which has long runtime. The
available charge-and-discharge times are 500.
2. It is reliably safe. The inner circuit is against overcharge,
overdischarge, overcurrent, and short circuit.
3. Take only 3.5 hours to fully charge the battery by using the
standard battery charger.
● Cautions
1. Do not short circuit.
2. Do not expose to rain or immerse into water. This battery is not
water proof.
3. Keep out of reach of children.
4. No over 24 hours’ continuous charging.
5. Store in dry, cool, ventilated places.
6. Do not put aside or into fire.
7. Dead batteries should be disposed according to local regulations.
8. If the battery had ceased using for over 3 months, please make a
full recharge.
● Loading and Unloading the Battery
To unload the battery, hold
1 down the battery remove
button and push the battery
downwardly to take it out.
LED Modeling Lamp
Press the Modeling Lamp Setting button to set the modeling lamp.
Short press the Set Button to turn on or off the modeling lamp. When
turning the modeling lamp on, turn the select dial to set its brightness.
There are 10 levels(01~10) for choice.
Attaching to a Camera
Attach the Camera Flash.
1
● Rotate the hotshoe fixing
buckle to the left and insert
the camera flash into the
camera's hotshoe.
Secure the Camera Flash.
2
● Rotate the hotshoe fixing
buckle to the right until it
locks up.
According to the triangle sign
2 on the battery pack, insert it
into the compartment until a
white knob locks the battery
with a click sound.
Detach the Camera Flash.
3
● Press the button and
rotate the hotshoe fixing
buckle to the left until it is
loosened.
● Battery Level Indication
Make sure the battery pack is securely loaded in the flash. Check
the battery level indication on the LCD panel to see the remaining
battery level.
Battery Level Indication
3 grids
2 grids
1 grid
Blank grid
Blinking
- 37 - - 38 -
Meaning
Full
Middle
Low
Lower battery, please recharge it.
The battery level is going to be used out
immediately. And the flash will auto power off
in 1 minute.
Note: Please recharge the battery as soon as
possible (within 10 days). Then, the battery can be
used or be placed for long period.
Power Management
Use ON/O FF Power Switch to power the flash unit on or off. Turn
off if it will not be used for an extended period of time. Setting as a
master flash, it will turn the power off automatically after a certain
period (approx. 90 seconds) of idle use. Pressing the camera
shutter halfway or pressing any flash button will wake up the flash
unit. Setting as a slave flash, it will enter sleep mode after a certain
period (adjustable, 60 minutes by default) of idle use. Pressing any
flash button will wake it up.
C.Fn
Disabling Auto Power Off function is recommended when
the flash is used off camera. (C.Fn-STBY, Page 52)
Slave Auto Power Off Timer is set to 60 minutes by
C.Fn
default. Another option “30 minutes” is available. (C.Fn-
Sv STB Y, Page 52)
Flash Mode—TTL Autoflash
This flash has three flash modes: TTL, Manual (M), and Multi
(Stroboscopic). In TTL mode, the camera and the flash will work
together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available:
FEC, H SS, second curtain sync, modeling flash, control with the
camera’s menu screen.
* Press < MOD E > Mode Selection Button and three flash modes
will display on the LCD panel one by one with each pressing.
TTL Mode
Press < MOD E > Mode Selection Button to enter TTL mode. The
LCD panel will display.
● Press the camera release button halfway to focus. The aperture
and effective flash range will be displayed in the viewfinder.
● When the shutter button is fully pressed, the flash will fire a pre-
flash that the camera will use to calculate exposure and flash
output the instant before the photo is taken.
FEC: Flash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.
It is useful in situations where minor adjusting of the TTL system is
needed based on the environment.
Setting FEC:
Press Function Button 2
1 Press the <+/-> button. The
icon < > and flash
exposure compensation
amount will be highlighted on
the LCD panel.
Set the flash exposure
2 compensation amount.
● Turn the Select Dial to set
the amount.
● “0.3”means 1/3 step,
“0.7”means 2/3 step.
● To cancel the flash
exposure compensation,
set the amount to “+0”.
Press Set Button again to
3 confirm the setting.
High-Speed Sync
High Speed Sync (Hss flash) enables the flash to synchronize with
all camera shutter speeds. This is convenient when you want to use
aperture priority for fill-flash portraits.
● Setting the flash to High-speed Sync mode when it is on the camera:
Use the Flash Setting ＞ Flash Light Function Setting on the
camera’s shooting menu to adjust settings of the flash light. More
details please refer to camera’s instruction menu.
SYNC.MODE
SHOEMOUNTFLASH
TTL
±0
-5.0 +5.0
TTL MODE TTL
ZOOM
LED AF
● When choosing FP on the “SYNC” setting, it means the
high-speed sync function is turned on.
● With high-speed sync, the faster the shutter speed, the
shorter the effective flash range.
● Multi flash mode cannot be set in high-speed sync mode.
● Over-temperature protection may be activated after 15
consecutive high-speed sync flashes.
Second-Curtain Sync
With a slow shutter speed, you can create a light train following the
subject. The flash fires right before the shutter closes.
● Setting second-curtain sync:
Use the Flash Setting ＞Flash Light Function Setting on the
camera’s shooting menu to adjust settings of the flash light. More
details please refer to camera’s instruction menu.
SYNC.MODE
SHOEMOUNTFLASH
TTL
±0
TTL MODE TTL
ZOOM
LED AF
● When choosing REAR on the “SYNC” setting, it means the
second-curtain sync function is turned on.
SYNC.
M 16mm
ANGLE
ADJUST
-5.0 +5.0
SYNC.
M 16mm
ANGLE
BACK
ADJUST
BACK
FP
END
REAR
END
- 39 - - 40 -
M: Manual Flash
Multi: Stroboscopic Flash
The flash output is adjustable from 1/1 full power to 1/256th power
in 1/10th stop increments. To obtain a correct flash exposure, use a
hand-held flash meter to determine the required flash output.
Press < MOD E > button so
1 that < M > is displayed.
Press the <+/-> button and turn
2 the Select Dial to choose a
desired flash output amount.
Press Set Button again to
3 confirm the setting.
Optic S1 Secondary Unit Setting
In M manual flash mode, press <S1/S2> button so that this flash can
function as an optic S1 secondary flash with optic sensor. With this
function, the flash will fire synchronously when the main flash fires,
the same effect as that by the use of radio triggers. This helps create
multiple lighting effects.
Optic S2 Secondary Unit Setting
Press <S1/S2> button so that this flash can also function as an optic
S2 secondary flash with optic sensor in M manual flash mode. This
is useful when cameras have pre-flash function. With this function,
the flash will ignore a single “preflash” from the main flash and will
only fire in response to the second, actual flash from the main unit.
● S1 and S2 optic triggering is only available in M manual
flash mode.
With stroboscopic flash, a rapid series of flashes is fired. It can be
used to capture a multiple images of a moving subject in a single
photograph.
You can set the firing frequency (number of flashes per sec.
expressed as Hz), the number of flashes, and the flash output.
Press <MOD E> button so
1 that < > is displayed.
MULTI
Set the flash frequency and
2 flash times.
● Press the Function Button
2 <Times> to select the
flash times. Turn the Select
Dial to set the number.
● Press the Function Button
3 <Hz> to select the flash
frequency. Turn the Select
Dial to set the number.
Turn the Select Dial to
3 choose a desired flash
output.
● After you finish the setting,
press Set Button and all the
settings will be displayed.
Calculating the Shutter Speed
During stroboscopic flash, the shutter remains open until the firing
stops. Use the formula below to calculate the shutter speed and set
it with the camera.
Number of Flashes / Flash Frequency = Shutter Speed
For example, if the number of flashes is 10 and the firing frequency is
5 Hz, the shutter speed should be at least 2 seconds.
To avoid overheating and deteriorating the flash head, do not
use stroboscopic flash more than 10 times in succession.
After 10 times, allow the camera flash to rest for at least 15
minutes. If you try to use the stroboscopic flash more than 10
times in succession, the firing might stop automatically to
protect the flash head. If this happens, allow at least 15
minutes’ rest for the camera flash.
● Stroboscopic flash is most effective with a highly reflective
subject against a dark background.
● Using a tripod and a remote control is recommended.
● A flash output of 1/1 and 1/2 cannot be set for stroboscopic
flash.
● Stroboscopic flash can be used with“buLb”.
● If the number of flashes is displayed as “--”, the firing will
continue until the shutter closes or the battery is
exhausted. The number of flashes will be limited as shown
by the following table.
- 41 - - 42 -
Maximum Stroboscopic Flashes:
Hz
Flash
output
1/4
1/8
1/16
1/32
1/64
1/128
1/256
1
2
8
6
14
14
30
30
60
60
90
90
90
90
90
90
Positioning and Operation Range (Example of wireless flash
3
4
5
6-7
8-9
4
3
3
2
2
12
10
8
6
5
30
20
20
20
10
60
50
50
40
30
90
80
80
70
60
90
90
90
90
80
90
90
90
90
80
shooting)
● Autoflash Shooting with One Slave Unit
Transmission distance is about 100m.
Hz
Flash
output
1/4
1/8
1/16
1/32
1/64
1/128
1/256
10
20-50
60-100
2
2
2
4
4
4
8
8
8
20
16
12
50
30
20
70
40
40
70
40
40
Wireless Flash Shooting: Radio (2.4G) Transmission
● The V1F attach to the camera is called the master unit, and
a V1F that is wirelessly controlled is called the slave unit.
● You can also wirelessly control the V1F set as the slave unit
with the transmitter X1T-F or XProF (sold separately). For
details on setting the master unit functions, see the
transmitter’s instructions.
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on
the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Wireless Multiple Flash Shooting
You can divide the slave units into two or three groups and perform
TTL autoflash while changing the flash ratio (factor). In addition, you
can set and shoot with a different flash mode for each firing group,
for up to 4 groups.
● Auto Shooting with Two Slave Groups
A
B
● Auto Shooting with Three Slave Groups
C
Using a flash (master/slave) with a radio transmission wireless
shooting function make it easy to shoot with advanced wireless
multiple flash lighting, in the same way as TTL autoflash shooting.
The basic relative position and operation range are as shown in the
picture. You can then perform wireless TTL autoflash shooting just
by setting the master unit to <TTL>.
- 43 -
A
B
- 44 -
1. Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.
Master Unit Setting
Press < > button so that < >
is displayed on the LCD panel.
Slave Unit Setting
Press < > button so that < >
or < > are displayed on
the LCD panel.
2. Group Mode Selection
The function button 1/2/3/4
1 can can control the group
M/A/B/C. Short press
function button can select
TTL/M/OFF. Choose one of
them as the flash mode of
the master unit.
Press <MODE> button to
2 switch to Multi mode.
3. Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the
channel IDs to prevent signal interference. The channel IDs of the
master unit and the slave unit(s) must be set to the same.
Press <MEN U> Button to
1 enter C.Fn CH setting.
4. Wireless ID Settings
Change the wireless channels and wireless ID to avoid interference
for it can only be triggered after the wireless IDs and channels of the
master unit and the slave unit are set to the same.Press the <MEN U>
button to enter C.Fn ID. Press the Set Button to choose O FF channel
expansion shutdown, and choose any figure from 01 to 99.
C.Fn Ver 0.5
STBY99SCAN
CH
ID
BEEP
CLEAR
5. Scan the Spare Channel
To avoid the interference of using the same channel by others, this
function can be used: enter the C.Fn settings and find the SCAN
option. When setting it to START, it will scan from 1% to 100%. And
the 8 spare channels will be displayed after the scan is completed.
C.Fn Ver 0.5
SCAN
CH
ID
22 08 32 2 3
30 21 07 0 6
BEEP
CLEAR
6. TTL：Fully Automatic Wireless Flash Shooting
Using Automatic Wireless Flash with a Single Slave Unit
Master Unit Setting
1
● Attach a camera V1F
flash on the camera and
set it as the master unit.
● M/A/B/C can be set to TTL
separately.
C.Fn Ver 0.5
STBY07SCAN
CH
ID
BEEP
CLEAR
- 45 -
In C.Fn CH, turn the Select
2 Dial to choose channel ID
from 1 to 32.
Press the Set Button to
3 confirm.
- 46 -
Slave Unit Setting
2
● Set the other camera flash
as the wireless slave Unit.
Check the communication
3 channel.
● If the master unit and slave
unit(s) are set to a different
channel, set them to the
same channel. (Page 45)
Position the camera and
4 flashes.
● Position the camera and
flashes as the picture
shows. (Page 44)
Check that the flash is
5 ready.
● Check that the master flash
ready indicator is lightened.
Check the flash operation.
6
● Press the master unit’s
Test Button < >.
● Then, the slave unit will
fire. If not, adjust the slave
unit’s angle toward the
master unit and distance
from the master unit.
Using Automatic Wireless Flash with Multiple Slave Units
When stronger flash output or
more convenient lighting operation
is needed, increase the number of
slave units and set it as a single
slave unit.
To add slave units, use the same
steps as setting “automatic
wireless flash with a single slave
unit”. Any flash group can be set
(A/B/C/D/E).
When the number of slave units is
increased and the master unit
flash firing is ON, automatic
control is implemented to make all
groups of flashes fire the same
flash output and ensure the total
flash output up is to standard
exposure.
● If the slave unit’s auto power off function is workable, press the master
unit’s test button to power it on. Please note that test firing is unavailable
during the camera’s regular metering time.
● The effective time of slave auto power off is changeable. (C.Fn-Sv STBY
Page 52)
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be
appeared on the slave unit automatically. The slave unit does not
need any operation. Use the following settings to make wireless
flashes according to the same methods with normal flash shooting.
● Flash Exposure Compensation ( Page 39)
- 47 -
About Master Unit
Use two or more master units. By preparing several cameras that
with master units flash attached, cameras can be changed in
shooting while keeping the same lighting source (slave unit).
- 48 -
7. M: Wireless Flash Shooting with Manual Flash
This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
Setting the flash mode to
1 <M>.
Setting flash
2 output.1/2/3/4<M/A/B/C>
● Press Function Button 3
Gr
< >. Turn the Select
Dial to set the flash output
of the groups. Press Set
Button to confirm.
Taking the picture.
● Each group fires at the set
3
flash ratio.
Setting <M> Flash Mode
You can directly operate the slave unit to manually set the manual
flash or stroboscopic flash.
Setting the slave unit.
1
Setting flash mode to <M>.
2
● Press <MOD E> button so
that <M> is displayed.
● Set the manual flash
output. (Page 41)
Other Applications
Sync Triggering
The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here
and the flash will be fired synchronously with the camera shutter.
Auto Focus Assist Beam
In poorly-lit or low-contrast shooting environments, the built-in auto
focus assist beam will automatically light on to make it easier for
autofocus. The beam will light up only when autofocus is difficult
and get out as soon as the autofocus becomes correct.
If you want to turn off the auto focus assist beam, set the “AF” to
“OFF” on the C.Fn settings.
● If you find the auto focus assist beam does not light up, this
is because the camera has got a correct autofocus.
● Camera models that support auto focus assist beam:
X-PRO2, X-T20, X-T2, X-T1, GFX50S, GFX50R
Position
Center
Periphery
Effective Range
0.6~10m / 2.0~32.8 feet
0.6~5m / 2.0~16.4 feet
8. Multi: Wireless Flash Shooting with Manual Flash
Setting <MULTI> stroboscopic
flash.
CH 21
FUJI FILM
- 49 - - 50 -
● Press <MODE> button so that
<MULTI> is displayed.
● Setting the stroboscopic flash.
(Page 42)
Bounce Flash
By pointing the flash head toward a wall or ceiling, the flash will
bounce off the surface before illuminating the subject. This can
soften shadows behind the subject for a more natural-looking shot.
This is called bounce flash.
To set the bounce direction, hold the flash head and turn it to a
satisfying angle.
-7-120°
330°
● If the wall or ceiling is too far away, the bounced flash might
be too weak and result in underexposure.
● The wall or ceiling should be a plain, white color for high
reflectance. If the bounce surface is not white, a color cast
may appear in the picture.
ZOOM: Setting the Flash Coverage and Using
the Wide Panel
The flash coverage can be set automatically or manually. It can be
set to match the lens focal length from 28 mm to 105mm (135
system). Also, with the built-in wide panel, the flash coverage can
be expanded for 12mm wide-angle lenses.
Choose APS or 135 system in the C.Fn-ZOOM.
In Manual Zoom mode, press the
<ZOO M> button.
● Turn the Select Dial to change
the flash coverage.
● If < > is displayed, the flash
coverage will be set
automatically.
If you set the flash coverage manually, make sure it covers
the lens focal length so that the picture will not have a dark
periphery.
Low Battery Warning
If the battery power is low, < >
will appear and blink on the LCD
panel. Please replace the battery
immediately.
C.Fn: Setting Custom Functions
The following table lists the available and unavailable custom
functions of this flash.
C.Fn Custom Functions
Custom
Function
Signs
m/ft
AF
STBY
Sv STBY
SCAN
CH
ID
BEEP
LIGHT
LCD
ZOOM
1. Press<MEN U> Button until C.Fn menu is displayed. The “Ver
x.x” in the top-right corner refers to the software version.
2. Select the Custom Function No.
● Turn the Select Dial to select the Custom Function No.
3. Change the Setting.
● Press Set Button and the Setting No. is selected.
● Turn the Select Dial to set the desired number. Pressing Set
● After you set the Custom Function and press <MENU> button,
4. In the C.Fn states, long press the “Clear”button for 2 seconds
until “OK”is displayed on the panel, which means the values in
C.Fn can be reset.
Function
Distance indicator
AF-assist beam
Auto sleep setting
Slave auto power
off timer
Scan the spare
channel
Channel setting
Wireless ID
Beeper
Backlighting time
LCD contrast ratio
Zoom display
Button will confirm the settings.
the camera will be ready to shoot.
Setting
No.
m
ft
ON
OFF
ON
OFF
60min
30min
OFF
START
01-32
OFF
01-99
ON
OFF
12sec
OFF
ON
-3~+3
APS
135
Settings &
Description
m
feet
ON
OFF
ON
OFF
60min
30min
OFF
Start to find the spare
channel
Choose channels
from 01-32
Off
Choose any figure
from 01-99
ON
OFF
Off in 12 sec.
Always off
Always lighting
7 levels
APS System
135 System
- 51 - - 52 -
Protection Function
1. Over-Temperature Protection
● To avoid overheating and deteriorating the flash head, do not fire
more than 30 continuous flashes in fast succession at 1/1 full
power. After 30 continuous flashes, allow a rest time of at least 10
minutes.
● If you fire more than 30 continuous flashes and then fire more
flashes in short intervals, the inner over-temperature protection
function may be activated and make the recycling time over 10
seconds. If this occurs, allow a rest time of about 10 minutes, and
the flash unit will then return to normal.
● When the over-temperature protection is started, is shown on
the LCD display.
Number of flashes that will activate over-temperature
protection:
Power Output Level
1/1
1/2 +0.7
1/2 +0.3
1/2
1/4(+0.3,+0.7)
1/8(+0.3,+0.7)
1/16(+0.3,+0.7)
1/32(+0.3,+0.7)
1/64(+0.3,+0.7)
1/128(+0.3,+0.7)
1/256(+0.3,+0.7)
Number of flashes that will activate over-temperature
protection in high-speed sync triggering mode:
Power Output
1/1
1/2(+0.3,+0.7);
1/4(+0.3,+0.7)
1/8(+0.3,+0.7);
1/16(+0.3,+0.7)
1/32(+0.3,+0.7);
1/64(+0.3,+0.7);
1/128(+0.3,+0.7);
1/256(+0.3,+0.7);
2. Other Protections
The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
Prompts on LCD Panel
E1
E2
E3
E9
- 53 -
Number of Flashes
30
40
50
60
100
200
300
500
1000
Times
15
20
30
40
50
Meaning
A failure occurs on the recycling system so that the
flash cannot fire.
Please restart the flash unit. If the problem still exists,
please send this product to a maintenance center.
The system gets excessive heat. Please allow a rest
time of 10 minutes.
The voltage on two outlets of the flash tube is too high.
Please send this product to a maintenance center.
There are some errors occurred during the upgrading
process. Please using the correct firmware upgrade
method.
Technical Data
Model
Compatible Cameras
Power
(1/1 output)
Flash Coverage
Flash Duration
• Exposure Control
Exposure control system
Flash exposure
compensation (FEC)
Sync mode
Multi flash
• Wireless Flash
Wireless flash function
Master groups
Controllable
slave groups
Transmission range
(approx.)
Channels
ID
Modeling flash
• Auto Focus Assist Beam
Effective range (approx.)
• LED Modeling Lamp
Power
Color Temperature
• Power Supply
Power source
Recycle time
Full power flashes
Power saving
• Sync Triggering Mode
• Color Temperature
• Dimensions
W x H x D
Weight without battery
Weight with battery
2.4G Wireless Frequency
Range
Max. Transmitting Power
of 2.4G Wireless
V1F
FUJIFILM cameras (TTL autoflash)
76Ws
28 to 105mm
• Auto zoom (Flash coverage set automatically
to match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to 330°
horizontally and -7° to 120° vertically
1/300 to 1/20000 seconds
TTL autoflash and manual flash
Manual. FEB: ±3 stops in 1/3 stop increments
(Manual FEC and FEB can be combined.)
High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Provided (up to 90 times, 100Hz)
Master, Slave, Off
M,A,B,C
A, B, C, D, E (D/E group can be controlled by X
series flash trigger)
100m
32 (1~32)
01~99
Fired with camera’s depth-of-field preview button
Center: 0.6~10m / 2.0~32.8 feet
Periphery: 0.6~5m / 2.0~16.4 feet
2W
3300K±200K
7.2V/2600mAh Li-ion battery
Approx 1.5 seconds. Green LED indicator will light up
when the flash is ready.
Approx. 480
Power off automatically after approx. 90 seconds
of idle operation. (60 minutes if set as slave)
Hotshoe, 2.5mm sync line
5600±200k
76*93*197mm
420g
530g
2413.0MHz-2464.5MHz
5dbm
- 54 -
Troubleshooting
Firmware Upgrade
If there is a problem, refer to this Troubleshooting Guide.
The Camera Flash does not fire.
● The camera flash is not attached securely to the camera.
→Attach the camera’s mounting foot securely to the camera.
● The electrical contacts of the Camera Flash and camera are dirty.
→Clean the contacts.
● < > or < > is not displayed in the view finder of camera.
→Wait until the flash is fully recycled and the flash ready indicator
lights up.
→If the flash ready indicator lights up, but < > or < > is not
displayed in the view finder, check whether this flash unit is
securely attached to the camera hotshoe.
→If the flash ready indicator does not light up after a long wait,
check whether the battery power is enough. If the battery power
is low, < > will appear and blink on the LCD panel. Please
replace the battery immediately.
The power turns off by itself.
● After 90 seconds of idle operation, auto power off took effect if the
flash is set as master.
→Press the shutter button halfway or press any flash button to
wake up.
● After 60 minutes (or 30 minutes) of idle operation, the flash unit
will enter sleep mode if it is set as slave.
→Press any flash button to wake up.
Auto zoom does not work.
● The camera flash is not attached securely to the camera.
→Attach the camera flash’s mounting foot to the camera.
The flash exposure is underexposed or overexposed.
● You used high-speed sync.
→With high-speed sync, the effective flash range will be shorter.
Make sure the subject is within the effective flash range
displayed.
● You used Manual Flash mode.
→Set the flash mode to TTL or modify the flash output.
Photos have dark corners or only parts of the target subject
are illuminated.
● The focal length of lens exceeds the flash coverage.
→Check the flash coverage you set. This flash unit has the flash
coverage between 28 and 105mm, which fits medium-format
cameras.
● The USB port is a Type-C US B socket. Type-C USB connection
line is applicable.
● As the firmware upgrade needs the support of Godox G3
software, please download and install the "Godox G3 firmware
upgrade software" before upgrading. Then, choose the related
firmware file.
● As the product needs to do firmware upgrade, please refer to
instruction manual of the newest electric version as final.
Compatible Camera Models
Fuji cameras are divided into three kinds according to their
different controlling ways to camera flash:
A
X-Pro2, X-T20 , X-T2 , X-T1，GFX50S，GFX50R
B
X-Pro1 , X-T10 , X-E1 , X-A3
C
X100F, X100T
Compatible camera models & functions support
Camera Flash
TTL Flash M Manual Flash
Standard
camera
A
√ √ √ √ √ √ √
B
√ √ √
C
√ √ √ √ √ √ √
AF-assist Beam
A
B
C
1. X100T do not have second curtain sync (REAR) function.
2. The AF assist beam will light up when the shutter is at low speed (＜200).
• This table only lists the tested camera models, not all Fuji cameras. For the
Stan-
HSS(FP)
REAR
-- -- -- -- -- -- -- --
√
--
--
compatibility of other camera models, a self-test is recommended.
HSS(FP)
REAR
dard
2.4G Wireless Control
Multi
TTL Flash M Manual Flash
Strobo
Stan-
-scopic
dard
Flash
√ √ √ √ √ √ √
√ √ √
√ √ -- √ √ -- √
REAR
HSS(FP)
Standard
REAR
HSS(FP)
Multi
Strobo
-scopic
Flash
• Rights to modify this table are retained.
Maintenance
● Shut down the device immediately should abnormal operation be
detected.
● Avoid sudden impacts and the product should be dedusted
regularly.
● It is normal for the flash tube to be warm when in use. Avoid
continuous flashes if unnecessary.
● Maintenance of the flash must be performed by our authorized
maintenance department which can provide original accessories.
● This product, except consumables e.g. flash tube, is supported
with a one-year warranty.
● Unauthorized service will void the warranty.
● If the product had failures or was wetted, do not use it until it is
repaired by professionals.
● Changes made to the specifications or designs may not be
reflected in this manual.
- 55 -
- 56 -
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
4 Reorient or relocate the receiving antenna.
4 Increase the separation between the equipment and receiver.
4 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4 Consult the dealer or an experienced radio/TV technician for
help.
*RF warning:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
- 57 -
- 58 -
Loading...