Godox Thinklite TT350F User Manual

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.com

705-TT35F0-00 Made in China

迅丽TTL机顶闪光灯

Thinklite TTL Camera Flash

For Fuji

INSTRUCTION MANUAL 说明手册

中英文双语 / Chinese English Bilingual

在使用本产品之前：

请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将

来查询参考。

Before using this product: Please read this user manual carefully in order to ensure your safety

and the proper operation of this product. Keep for future reference.

Foreword

Thank you for purchasing this product.

This TT350F camera flash applies to FUJI series cameras and is compatible with TTL autoflash. With this TTL compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments. This camera flash features:

• GN36 (m ISO 100, @105mm).•

• Fully support FUJI TTL camera flash. Workable as Master or Slave unit in a wireless flash group.

• With built-in 2.4GHz wireless remote system to support transmitting and receiving.

• Provided multiple functions, include manual flash, multi flash, HSS (up to 1/8000s), second curtain sync, FEC, etc.

• Support with firmware upgrade.

Compatible Camera Models

Fuji cameras are divided into three kinds according to their different controlling ways to camera flash:

X-Pro2, X-T20 , X-T2 , X-T1

X-Pro1 , X-T10 , X-E1 , X-A3

X100F, X100T

Compatible camera models & functions support

Camera Flash

TTL Flash M Manual Flash

Standard

camera

√ √ √ √ √ √ √ √ √ √

√ √ √ √ √ √ √

AF-assist Beam

1. X 100T do not have second curtain sync (REAR) function.

2. The AF assist beam will light up when the shutter is at low speed (＜200).

Stan-

HSS(FP)

REAR

-- -- -- -- -- -- -- --

√

HSS(FP)

REAR

dard

2.4G Wireless Control

Multi

TTL Flash M Manual Flash

Strobo

Stan-

-scopic dard

Flash

√ √ √ √ √ √ √ √ √ √

√ √ -- √ √ -- √

REAR

HSS(FP)

Standard

REAR

HSS(FP)

Multi Strobo

-scopic Flash

• This table only lists the tested camera models, not all Fuji cameras. For the

compatibility of other camera models, a self-test is recommended.

• Rights to modify this table are retained.

Warning

Always keep this product dry. Do not use in rain or in damp conditions.

Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.

Keep out of reach of children.

Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it.

Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur.

Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.

Do not leave or store the flash unit if the ambient temperature

reads over 50℃. Otherwise the electronic parts may be

damaged.

Turn off the flash unit immediately in the event of malfunction.

- 25 -

- 26 -

E l e c t r o n i c C a m e r a F l a s h

Thinklite TTL Camera Flash

Conventions used in this Manual

● This manual is based on the assumption that both the camera

and camera flash’s power switches are powered on.

● Reference page numbers are indicated by “p.**”.

● The following alert symbols are used in this manual:

The Caution symbol gives supplemental information.

The Note symbol indicates a warning to prevent shooting

problem.

Contents

Foreword

Compatible Camera Models

Warning

Name of Parts

Body

Control Panel

LCD Panel

What's in the Box of TT350F?

Separately Sold Accessories

Attaching to a Camera

Power Management

Flash Mode: TTL Autoflash

FEC (Flash Exposure Compensation)

High-Speed Sync

Second-Curtain Sync

Flash Mode – M: Manual Flash

Flash Mode – Multi: Stroboscopic Flash

Wireless Flash Shooting: Radio (2.4G) Transmission

Wireless Settings

Setting Master Unit’s Flash Mode

Setting the Communication Channel

Wireless ID Settings

TTL: Fully Automatic Wireless Flash Shooting

M: Wireless Flash Shooting with Manual Flash

Multi: Wireless Flash Shooting with Manual Flash

Other Applications

Auto Focus Assist Beam

Bounce Flash

Creating a Catchlight

ZOOM: Setting the Flash Coverage and Using the Wide Panel

Low Battery Indicator

C.Fn: Setting Custom Functions

Protection Function

Firmware Upgrade

Technical Data

Troubleshooting

Maintenance

- 27 -

- 28 -

MODE ZOOM SYNC SLAVE

SET

Name of Parts

● LCD Panel

(1) TTL Autoflash

Zoom : zoom display (Page 43)

TTL : TTL autoflash

Focus length (Page 43)

● Body

01. Catchlight Panel

02. Built-in Wide Panel

03. Flash Head

04. Optic Control Sensor

05. Focus Assist Beam

● Control Panel

11. <MODE>Mode Selection Button

12. <ZOOM>Zoom Selection Button

13.<SYNC>High-Speed Sync Button

14. <SLAVE> S1/S2 Optic Slave

Triggering Selection Button

(in non-wireless mode)

15. < > Power Switch

16. < > Test Button / Flash Ready

Indicator.

17. < >Custom Function Setting

Button (reusable button, long

- 29 -

06. Hotshoe

07. LCD Panel

08. Lock Ring

09. Battery Compartment

: Flash exposure

compensation (Page 33)

(2)M Manual Flash

(3)Multi Flash

Flash exposure compensation amount

M : Manual flash

Manual flash output

Multi : Stroboscopic flash

Number of flashes

Flash frequency

10. USB Port

14 19 18 15 20

(4) Radio Transmission Shooting

● Master Unit

Firing group

Master

Flash mode

Channel

press for 2 seconds)

18. < > Wireless Selection

Button (reusable button, long press for 2 seconds)

● Slave Unit

19. <GR/CH> Group/Channel Button

(reusable button, in wireless

mode)

20. Select Dial

21.<SET> Set Button

Slave

- 30 -

+ 9 hidden pages