Godox GS400II User Manual

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: [phone](8062) 传真/Fax: [phone]

邮箱/E-mail: [e-mail] http://www.godox.com

705-GS2000-00

Made In China

双子

Instruction Manual

说明手册

系列影室闪光灯

GS

Compact Studio Flash

Chinese English Bilingual

中英文双语

FOREWORD

Thanks for choosing Gemini GSII series studio flash. It is a durable and good

quality strobe with complete functions to help photographers create desired

lighting effects. The product is suited for wedding, portrait, and product

photography. The GSII flash offers:

Built-in Godox 2.4G wireless X system

Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0-10.0) in

0.1 increments

High-qualified modeling lamp, 150W output and 5% to 100% manual light

adjustment

Outstanding output stability, a tolerance of ≤ 2% under the same output

Anti-preflash function, enabling synchronization with cameras having a one-

preflash firing system

Adjusted parameters intelligently remembered after 3s and automatically

recovered after a restart

Wireless control of the flash power ratio, the on-and-off of modeling lamp and

buzzer, as well as flash triggering with Godox X1, XT32 or FT-16 flash trigger

CONTENTS

Warning

To prevent damage to the product or injury to you or to others, read the

following warnings in their entirety before using this product. Keep these

safety instructions where users can read them for ready reference.

Do not disassemble or modify. Should the product break down, send the

defective back to the authorized service center for inspection and maintenance.

Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.

Keep out of reach of children.

Please put the device in a ventilation environment and keep the parts of lighting

and heat dissipation holes are unobstructed. Do not use in flammable

environment.

As this product adopts make and break device, please keep it easy to be used.

No touching the heating parts of this product.

Please turn off the power and wear insulated gloves before installing and

connecting accessories. When replacing the tube or modeling lamp, please

make sure that the tube is cool and wear insulated gloves to prevent burns.

Do not flash directly towards naked eyes (especially those of babies), otherwise

it may lead to visual impairment.

Disconnect from the power supply when it will not be used for an extended

period.

09 Foreword

10 Warning

10 Caution

11 Names of Parts

11 Body

•

12 LCD Panel•

12 Accessories•

12 Separately Sold Accessories

13 Operations

•

13 Flash Preparation

13 Power Connection•

13 Modeling Lamp•

14 Power Output Control•

14 Test Button•

14 Sync Triggering•

14 GR/CH Button•

15 Slave Trigger Model•

15 Buzz Function•

15 • Key Combination

15 • Alarm Display

•

Memory Function15

16Wireless Control Function •

17Tube Replacement •

18 Technical Data

Maintenance18

CAUTION

After 30 continuous flashes at full power, the flash should be cooled down for

about 3 minutes. Overheating will occur if it is used continuously without cooling

down.

Do not keep using the modeling lamp for a long time; otherwise flammable

accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time

is recommended in this case. After 10 minutes, cool it down for 1 minute.

When using a snoot, do not keep the modeling lamp on for a long time or fire too

frequently (not over six times for one minute). Overheating will result in damages

for strobe housing and/or studio light.

Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.

- 10 -- 09 -