Goclever SPORT GOLD, DVR Sport Gold Owner's Manual

GOCLEVER DVR

SPORT GOLD

OWNER’S MANUAL

GOCLEVER DVR

SPORT GOLD

INSTRUKCJA OBSŁUGI

ODWIEDŹ NASZĄ STRONĘ

WWW.GOCLEVER.COM

ABY ZAPOZNAĆ SIĘ Z INNYMI PRODUKTAMI TAB, NAVIO, DVR, DVB-T

Przed skorzystaniem z urządzenia zapoznaj się z niniejszą instrukcją obsługi

oraz zachowaj ją na przyszłość

2

Contents / Spis treści

English

3

Polski

15

Warunki gwarancji

28

3

Functions

This user's manual has referred to the latest information we had when this user’s manual

was made. The screen display and illustrations are used in this user's manual for the
purpose of introducing details of this digital camera in a more specific and direct way.
Difference may arise between these displays and illustrations and the digital camera actually
available for you due to difference in technological development and production batch, under
which case, the actual functions of this video camera shall prevail.

Announcements

Please read the Announcements carefully before using this video camera for proper and safe
operation, so as to bring its optimum performance into play and extend its service life.

 Do not expose the video camera to sunshine directly, nor point its lens to sunlight.

Otherwise, the image sensor of the video camera may be damaged.

 Take good care of the video camera and prevent water or sand particles from entering

the video camera when it is used on the beach or water, because water, sand particles,
dust or component containing salt may damage the video camera.

 Keep the video camera contaminated free of dust and chemical materials. Place it in a

cool, dry and well ventilated place. Do not place the video camera in a high
temperature, moist or dusty place.

 Please check if the video camera can operate normally before use.
 If dirt or stain is accumulated on the video camera or on its lens, use soft, clean and

dry rag to wipe it away gently. If the video camera or its lens is stained with sand
particles, blow them away gently. Do not use cloth to wipe arbitrarily. Otherwise, it may
scratch the surface of video camera or its lens.

 If it is required to clean camera surface, firstly blow away the sand dust accumulated

on this surface, and then wipe the camera gently with rag or tissue applicable to optical
equipments. Please use the cleaning agent of video camera for wiping if necessary.
Do not use organic solvent to clean the video camera.

 Do not touch the lens surface with fingers.
 Please back up the data if the memory card inside this video camera is used for the

first time.

4

 The external SD memory card is made of precise electronic components. Data may be

lost or damaged under the following circumstances:

a. Improper use of the memory card, the memory card is bent or dropped.
b. Place it under high temperature or moist environment or expose to sunshine

directly.
c. Electrostatic or electromagnetic field exists around the memory card.
d. This memory card is taken out or power supply is interrupted when this video

camera or computer is connected to the memory card (i.e. during reading, writing

and formatting).
e. Touch the metal contact surface of the memory card with fingers or metal materials.

Waterproof Case

Before sealing the waterproof case, keep the camera housing’s rubber seal clean, a single hair

or grain of sand can cause a leak. You can test by closing the case without inserting the
camera. Submerse the case completely in water for about a minute. Remove the case from
the water, dry off its exterior with a towel, then open the case. If the entire interior is dry, the
case is safe for use under water.

 Remember to put the Mode Switch in your desired recording position before inserting

the camera in the waterproof case. There is no external button for the Mode Switch.

 After every use in salt water you will need to rinse the outside of the housing with non-

salt water and dry. Not doing this can eventually cause corrosion of the hinge pin and
salt buildup in the seal, which can cause failure.

5

Product Introduction

 This product is small in size and easy for installation.
 With high-performance chips, this product can produce high-definition videos with

excellent continuity of dynamic images, even under low illumination conditions, and
supports H.264 HD video format.

 The video mode supports four modes, i.e. VGA (120FPS), HD (60FPS), HD (30FPS)

and FHD (1920x1080 30FPS).

 The photo mode supports four sizes, i.e. 12M, 10M. 8M and 5M.
 Support high-speed USB2.0
 It supports a mini SD card with a capacity expansion up to 32G.
 This product supports video output and live playback functions. Videos can be output

to high-definition TVs for playing clear and sharp pictures.

System Requirements

System Requirements

Operating System

Microsoft Windows2000, XP, Vista, 7

CPU

Intel Pentium III of more than 800MHz or other CPU with
equivalent performance

Internal Memory

Larger than 512MB

Sound Card and Display Card

The sound card and display card shall support DirectX8 or
higher version.

CD Driver

Speed of 4 times or faster

Hard Disk

Free space of more than 500MB

Others

One standard USB1.1 or USB2.0 port

6

Introduction to Appearance and Keypad

7

Usage

Charge the built-in lithium battery

Connect the video camera with computer for charging in the shutdown state. The indicator
light (red) for charging is on at this time and will be off after charging. In general, it can be fully
charged after 2-4 hours.

Use of Memory Card

 Push the memory card into the card slot according to the concave lettering beside the

slot of memory card till it is completely inserted.

 To take out the memory card, gently press the end of the memory card inward and it

will pop up.

Note: No built-in memory is
available in this video camera.
Make sure to insert memory
card before using.

USB Cable

Indicator Light for

charging is on

8

Startup/Shutdown

 Startup: Press the POWER button for 3 seconds, the screen is displayed and the

camera is on.

 Shutdown: Press the POWER Key, and the camera will be shut down.

Automatic shutdown: when the idle time of the video camera reaches the time for
automatic shutdown, it will be shut down automatically to save power. The default time
of this camera for automatic shutdown is 5 minutes.

 Shutdown in case of power shortage: when the power of the battery is insufficient, the

LCD display screen will display the low power icon . Please charge it in time.
When indicate light turns red and flickering, the video camera will be shut down
automatically.

Conversion between Function Modes

The camera has three modes: video recording mode, photo mode and playback mode. These
modes can be switched over by clicking the icon in the upper left corner of the LCD display
after startup.

Video recording mode Photo mode Playback mode

9

Indicator light

Busy light (blue): when the camera is busy (such as, recording a film, taking photos, automatic
off-screen), the busy light will be on.

Charging light (red): when the light is on for a long time, it prompts the user that the camera is
charging.

Video recording mode

When the mode switch is turned to video recording mode, press the shutter button once to
begin recording under previewing state; press the shutter button once again if you want to stop
recording, and the camera will also stop recording, automatically when the memory card is full
or the power is insufficient.

1. Mode icon: indicating currently in the AVI mode.

2. Video size: available in FHD / HD / VGA.

3. Recording time: indicating the length of remaining time to be recorded.

4. Icon of setting the time and date.

5. Battery icon: indicating the current capacity of the battery.

6. Digital zoom-in icon: to zoom in by clicking it.

7. Digital zoom magnification (x).

8. Digital zoom-out icon: to recove by clicking it.

9. Menu icon: to be activated by clicking other icons.

10. Playback icon: to activate the corresponding menu by clicking it.