GoChip 00100 User Manual

Beam Overview Getting Started

Charging Light

Shows battery level
while charging

Wi-Fi Light

When this light stops
flashing you can
connect your device

Power Button

Power On:

Press and
hold for 3 seconds
until Power Light
turns on

Power Off:

Press and
hold for 3 seconds
until Power Light
turns off

Battery Level:

Quickly press power
button to view
battery level

GoChip Channel

GoChips
magnetically snap
in place

Battery level colors

Power Light

On/Off and battery
level indicator

Charging Port

Use the included
cable to charge
your Beam

Password
Label

Shows the Wi-Fi
Network name
(GoChip...) and
a password for
connecting to the
Beam from your
mobile device

Reset Button

Reset to factory
settings with end
of paper clip. See
gochip.com for
details

Download app

Visit gochip.com/apps on your phone, tablet or PC to download the GoChip
Player app, then create an account and log in.

Power on Beam

Press and hold the power button for 3 seconds until the right light turns on.
You can connect when the Wi-Fi light stops flashing.

Connect your device

On your mobile
device, open

Settings > Wi-Fi

to connect to the
GoChip Beam
(see label on
your Beam for
network name
and password), then wait for an indication that your device is connected.

Please note:

when you connect to your Beam, your device may let you

know that you are no longer connected to the Internet.

This is expected

behavior

because you are now connected to the Beam and not to the
Internet—giving you access to all your movies & TV shows without Internet
access or downloading.

Just Play!

Start the GoChip Player App and enjoy your movies and TV shows. You can
connect up to 8 devices at the same: each person playing what they want,
when they want. You provide the popcorn, we provide the fun.

Power o

ff

Beam

Press and hold the power button 3 seconds until the power light turns off.

Need help or want to learn more?

Visit gochip.com/beam

>90% charge 10–90% charge

<

10% charge

For more information visit

gochip.com

Note: this message is normal since you are now
connected to the Beam, not the Internet.

FCC and IC Notice

Federal Communications Commission (FCC) Statement

You are cautioned that changes or modifications not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that
may cause undesired operation of the device.

Canada, Industry Canada (IC) Notices

“This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.”

(IC French Notices )

Canada, avis d’Industry Canada (IC)

“Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisée aux deux condi­tions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouil­lage est susceptible d’en compromettre le fonctionnement.”

SAR FCC RF Radiation Exposure Statement:

Federal Communication Commission (FCC) Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure
limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the mea­surement methods and procedures specified in OET Bulletin 65 Supplement C.

SAR IC RF Radiation Exposure Statement:

The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower output
power if such function is available.

Déclaration d’exposition aux radiations:Le produit est conforme aux limites d’ex­position pour les appareils portables RF pour les Etats-Unis et le Canada établies
pour un environnement non contrôlé.

Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La
réduction aux expositions RF peut être augmentée si l’appareil peut être conservé
aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la
puissance de sortie la plus faible si une telle fonction est disponible.