Goblin HS268 User guide

Download

Goblin

HDD Image Maker

User Guide V 1.0

July, 2013

Content Index

Chapter 1. Product Overview

1. Overview 3

2. Features 4

3. System Overview 5 A. Appearance 5 B. Package Content 5 C. Connecting HDD 6 A. SATA HDD 6 B. eSATA HDD 6

4. Function Table 7

Chapter 2. How to Start to Backup HDD?

(1) HDD image backup 8 (2) One to one HDD duplication 8

1. Start to Backup Backup your HDD as an image. 9

2. Start to Backup HDD to Another HDD. 10

3. Notice before Copy 11

Chapter 3. How to Restore Image to Original HDD?

How to Restore Image to Original HDD? 14

Chapter 4. How to Confirm Accuracy?

How to Confirm Accuracy? 15

1. Check the copy accuracy by compare 15

2. Copy & Compare in One Step 16

Chapter 6. Utility Function

1. Show Disk Info 20 1-1. Model Number 20 1-2. Version of Firmware 20 1-3. Serial Number 21 1-4. Device Power Cycle 21 1-5. Power-on Hours 21 1-6. Reallocation Event Count 21 1-7. Off-Line Scan Uncorrectable Sector Count 21 1-8. Seek Error Rate 22 1-9. Temperature 22

2. System Info. 22

3. System Update 22 Step 1: Create Update HDD 22 Step 2: Update BIOS 23

Chapter 7. Setup Function

1. Set Copying Area of HDD 24

2. Skip Error 24

3. Language Choice 24

4. Advanced Setup Function 24 4-1. Copy or Skip Unknown Format 25 4-2. Stop Motor Time 25

5. Restore to Default Setting 26

Appensdix A.

FAQ 27

Chapter 5. How to Manage Image HDDs

How to Manage Image HDDs 17

1. System HDD Info. 17

2. Show Image Info. 17

3. Rename Image 18

4. Delete Image 18

5. Format HDD #2 19

Appendix B.

Specification 28

Product Overview

Chapter 1.

Product Overview

1. Overview

Goblin HDD Image Maker combines functions all in one, to copy, to backup, to restore by just using fast keys, which easily saves a lot of costs, times, and rooms. Goblin Series offer high transfer speed (16G/min) which run much faster, suitable especially for MIS people. Goblin can copy several hard disks as images to ONE big master HDD. Also, it restores the selected images back to the original hard disks.

MIS

Product Overview

2. Features

☉MIS & IT professional usage for HDD image backup and restore. ☉Backup up to 100 HDD-images into 1 big HDD. ☉Supporting HDD capacity up to 32TB (HS268). ☉Select image to restore back to its original HDD. ☉Support to backup data and system only and skip empty area, which saves

copying time & storage capacity.

☉Support quick copy for all major formats: Linux (ext2, ext3, ext4), Windows (NTFS,

FAT16, FAT32, FAT64), Mac OS (HFS, HFS+, HFSX).

☉Up to 16GB/min transfer speed (HS268), copying is much stable without

operation under PC. ☉Goblin does not compress HDD images, no risk of data loss. ☉Stand alone, no PC required. ☉One fast key for HDD copying. ☉Setting to automatically skip HDD error sectors. ☉Support 2.5" and 3.5" SATA HDD, SSD and eSATA. ☉Support 4 different duplication modes:

• Data quick copy (System and files)

• ALL Partitions

• Whole HDD

• Percentage ☉Automatically detect and show the bad sector quantity. ☉Lightweight portable design.

3. System Overview

.ureach-inc.com

A. Appearance

Source Connector

Product Overview

Red: Fail Green: Pass Yellow: Powering

Backward

Forward

Comﬁrm / OK

Cancel / Back

Function Item Description

Connector

Indicator

Key

Source connector To connect left side to source HDDs.

Target connector To connect right side to target HDDs.

Red (Fail) Red light on, to indicate bad section or error being discovered.

Green (Pass) Green light on, to indicate work passing.

Yellow (HDD Power on) Yellow light on, to indicate the side well connected.

UP To go to the previous page.

▽

DOWN To go to the next page.

△

OK To confirm the selection or enter this page.

󲽩

ESC To exit the page or cancel the selection.

╳

B. Package Content

Power adapter

Target Connector

Goblin

HDD Image Maker

User Guide V 1.0

July, 2013

The Data Equipment Expert • Duplication/Inspection/Sanitization

www

HDD Pad × 2 User Guide

Goblin HDD Image Maker × 1

SATA Cable

10cm×2 / 45cm×1

eSATA Cable × 2

Product Overview

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

C. Connecting HDD

A. SATA HDD

Source

HDD

B. eSATA HDD

Source

HDD

HDD Goblin

1.Copy

HDD Goblin

1.Copy

Target

HDD

Target

HDD

4. Function Table

Function Sub-Item Description

To backup source HDDs as images to "Big Master target HDD".

To restore images from "Big Master target HDD" back to the original HDDs.

To compare between the source HDDs and the target "Big Master target HDD".

To compare between the source "Big Master target HDD" and target HDDs.

To backup source as images to target HDD and then compare.

To restore images back to target HDDs and then compare.

To format the target hard disk used for Big Master target HDD.

To check the model No. of HDD, FW version, serial number, etc.

To setup number of skipped errors from 0 to 65535, or unlimited.

To skip or copy unknown area after failed to identify its format.

1. Copy

2. Compare

3. Copy+Compare

4. Image Manager

5. Utility

6. Setup

1. HDD▶Image

2. Image▶HDD

3. HDD▶HDD To copy HDDs exactly the same from source to target.

1. HDD▶Image

2. Image▶HDD

3. HDD▶HDD To compare between source HDD and target HDD.

1. HDD▶Image

2. Image▶HDD

3. HDD▶HDD To copy from source HDD to target HDD and then compare.

1. Show HDD Info To show info of Big Master target HDD.

2. Show Image Info To show Image files of Big Master target HDD.

3. Remame Image To rename Image files of tBig Master target HDD.

4. Delete Image To delete image files of Big Master target HDD.

5. Format HDD #2

1. Model Number

2. Version of Firmware

3. Serial Number

4. Device Power Cycle

1. Show Disk Info.

2. System Info To check version of the system, build number, etc.

3. Update System

1. Copy Area

2. Skip Error

3. Language English, Japanese

4. Advanced Setup

5. Restore Default To restore back to original factory parameter settings

5. Power-on Hours

6. Reallocation Event Count

7. Off-Line Scan Uncorrectable Sector Count

8. Seek Error Rate

9. Temperature

1. Update BIOS To update the system from BIOS HDD.

2. Create Update HDD To download BIOS to HDD from PC.

System and Files To set HDD data area only as copying source.

All Partitions To set HDD partition area as copying source.

Whole HDD To set complete HDD as copying source.

Percentage(%) To set copying source by starting and ending percentage.

Unknown Format

Stop Motor Time To set the waiting time for the motor to stopping time.

Function Table

Function : Copy

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

Chapter 2.

How to Start to Backup HDD?

There are 2 backup modes:

(1) HDD image backup

Backup several source HDDs as several images to "Big Master target HDD".

Source HDD Target : Big Master HDD

HDD1

HDD2

HDD3

image

HDD 1

image

HDD 2

HDD 3

HDD Goblin

1.Gopy

(2) One to one HDD duplication

Copy the target HDD as exactly as the source HDD.

HDD HDD

HDD Goblin

1.Gopy

Target HDDSource HDD

Function : Copy

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

1. Start to Backup Backup your HDD as an image.

Source HDD Target : Big Master HDD

HDD1

HDD2

HDD3

image

HDD 1

image

HDD 2

HDD 3

HDD Goblin

1.Gopy

Connect hard disks into source port to backup as image. Connect "Big Master" hard disk to the target port. Press " " to start to backup.

Select function table 1.Copy >> 1.HDD -> Image.

1

Press " " to start copying from source disk to target disk.

HDD Goblin

1.Copy

Once duplication is started, the progress information will be shown on LCD.

2

[Copy]

1.HDD -> Image

When the task is finished, the result of copying task will be shown "Complete" on LCD.

Task

Spending time

Finished percentage%

Copy 2442M 0:37 100% 2442M

HDD -> A001 Complete !

Total data siz Copied data size

Image name Process status

Notice

The default setting is the quick copy mode "System and Files". (check chapter 2.4 for more settings)

Function : Copy

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

2. Start to Backup HDD to Another HDD.

This makes HDDs backup exactly the same from source to target.

Target HDDSource HDD

HDD HDD

HDD Goblin

1.Gopy

Connect a source hard disk into source port; connect a hard disk to backup into the target port. Press " " to start to backup.

Select function table 1.Copy >> 3.HDD -> HDD. Press " " to start to copy from

1

hard disk to hard disk.

[Copy]

3.HDD -> HDD

Once duplication is finished, the result of copying task shows on LCD as "Pass "

or "Fail ".

Copy 2442M 0:38 100% 2442M

Error Message: The system will detect the reason and number of error.

Pass 0:37 No Bad Sector

Fail 0:47 Bad Sector R0 W1

Function : Copy

3. Notice before Copy

Before copying, please pay attention to the following setting and notice before start backup.

Set copying area of HDD:

The copying area setting will relate to space needed in big master HDD. Selecting

appropriate area can have better efficiency in duplication time and save HDD storage space..

There are four copying method for your selection:

System and Files, ②All Partition, ③Whole HDD and ④Percentage

①

System and Files (Support FAT16/32/64, ext2/3/4, NTFS, HFX, HFS, HFS+)

①

Source: 320GB

Data contained: 50G data

File & System

50G data

Target: 500GB

Big Master HDD

Image

Used

Space

50G

All Partition (Support all format)

②

Source: 320GB

Partition: 160G

Data contained: 50G data

All Partitions

160G

Target: 500GB

Big Master HDD

Image

Used

Space

160G

Function : Copy

Whole HDD (Support all format)

③

Source: 320GB

Partition: 160G

Data contained: 50G data

Whole HDD

320G

Target: 500GB

Big Master HDD

Image

Percentage (%)

④

Source: 320GB

0~25%: 80G

Data contained: 50G data

Format Big master HDD: For the first time to assign a HDD as a BIG MASTER

Percentage(%)

Target: 500GB

Big Master HDD

Image

Used

Space

320G

Used

Space

80G

HDD, you need to format it by Goblin first.

Make sure the hard disk has no important file. Use function 4.Image Manager

◦

>> 5.Format HDD #2 to create BIG MASTER HDD format.

Rename and Delete Image: If you want to rename or delete the image file, please

go to the function table 4.Image Manager.

4.Image Manager >> 3.Rename Image: Use " / " to select words up to 8

①

characters. Press " " to complete edition.

4.Image Manager >> 4.Delete Image: Use " / " to select image and press

②

" " to delete image files.

Function : Copy

When using Image Manager, the BIG MASTER HDD needs to be connected

＊

to the target side.

Notice

• The Goblin Big master HDD is a special format which cannot be identified by PC.

• The Goblin Big master HDD can save up to 100 HDD images as long as the space is enough.

• Please check your Goblin model specification and make sure the maximum supported HDD capacity.

Function : Copy

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

Chapter 3.

How to Restore Image to Original HDD?

Connect Goblin Big Master HDD into source port; connect empty hard disks to be restored to the target port. Press " " to start to restore.

Source : Big Master HDD Target HDD

HDD1

HDD2

HDD3

image

HDD 1

HDD Goblin

1.Gopy

Select function table 1.Copy >> 2.Image->HDD. Press " " and start to copy

HDD 2

HDD 3

from source image disk to target disk.

[Copy]

2.Image -> HDD

Once duplication is finished, the result of copying task will be shown on LCD.

Copy 2442M 0:38 100% 2442M

Notice

The target HDD will be covered by new data, make sure the HDD does not contain any important data.

A001 -> HDD Complete !

Function : Compare

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

Chapter 4.

How to Confirm Accuracy?

1. Check the copy accuracy by compare

This function will bit-for-bit compare source disks with target disks to ensure the copied disks are identical to source disks.

HDD Goblin

2.Compare

Insert source disks into source port and target disks into target port.

Using " " and " " to select function table 2.Compare >> sub-item. Press " "

to start to compare between source and target hard disks.

Target HDDSource HDD

The system will detect the source and target disks automatically. After detecting,

the system will start to compare and show the result on LCD.

HDD Goblin

2.Compare

Spending time

Percentage%

[Compare]

1.HDD -> Image

Task

Compare 2442M 0:37 100% 2442M

HDD -> A001 Complete !

Select Image: A001 2442M

Total size Compared size

HDD to Image ﬁle Task Status

Function : Compare

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

2. Copy & Compare in One Step

This function will copy first and automatically compare srart once the copying process has been finished.

HDD Goblin

3.Copy+Compare

Insert source disks into source port and target disks into target port.

Using " " and " " to select function table 3.Copy+Compare >> sub-item.

Press " " to start to copy and compare between source and target in one step.

Target HDDSource HDD

HDD Goblin

3.Copy+Compare

The system will detect the source and target disks automatically. After detecting,

[Copy+Compare]

1.HDD -> Image

the system will copy first. Once copying task is started, the copy progress will be shown on LCD.

Task

Copy 2442M

Percentage%

Then, comparing process will be shown on LCD. When both tasks are all

0:37 100% 2442M

Total size Copied sizeSpending time

finished, the system will show the result on LCD.

Spending time

Percentage%

Task

Compare 2442M 0:37 100% 2442M

HDD -> A001 Complete !

Total size Compared size

HDD to Image ﬁle Task Status

Function : Manage Image

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

Chapter 5.

How to Manage Image HDDs

This function will manage Image HDDs into target port. There are 5 modes to choose, ①Show HDD info., ②Show Image files, ③Rename Image files, Delete Image file and ⑤Format target HDD.

Notice

When using Image Manager, the BIG MASTER HDD needs to be connected to the target port.

HDD Goblin

4.Image Manager

BIG MASTER

1. System HDD Info.

This function will check basic information for target HDD #2

Select function table 4.Image Manager >> 1.Show HDD Info. and press " " to show HDDs information. Press " " key to check more related information such as capacity, free and used space, etc.

④

HDD

HDD Goblin

4.Image Manager [Image Manager]

1.Show HDD Info. Capacity: 149.0G

Free: 131G Total 5 images

Used: 15G

Total Capacity Free Space

Number of Images Used Space

2. Show Image Info.

This function enables to check information of Image files in Big Master HDD.

Function : Manage Image

Select function table 4.Image Manager >> 2.Show Image Info. and press " " to check information such as image names, used amount, etc.

HDD Goblin

4.Image Manager

[Image Manager]

2.Show ImageInfo

Select Image: A001 2442M

Select Image: A002 2M

Image ﬁle

File 1 capacityImage ﬁle

File 2 capacity

3. Rename Image

This function enables to change Images names of target hard disks up to 8 characters at most.

Select function table 4.Image Manager >> 3.Rename Image and press " ", using " / " to select files name to edit. Use " / " again to select words up to 8 characters. Press " " to complete edition.

HDD Goblin

4.Image Manager

[Image Manager]

3.Rename Image

Select Image: A001 2442M

Total CapacityImage ﬁle

Edit Image Name [_001 ]

Edit Image Name [B0000001] OK ?

Complete !

4. Delete Image

This function enables to delete Image files saved in BIG MASTER HDD.

Select function table 4.Image Manager >> 4.Delete Image. Use " / " to select image files and press " " to delete image files.

HDD Goblin

4.Image Manager

Image Manager]

4.Delete Image

Select Image: A001 2442M

Total CapacityImage ﬁle

Function : Manage Image

UP DOWN OK ESC

Source Target

Goblin

More than Ghost

5. Format HDD #2

Insert one HDD into the target port. Make sure the HDD has no important data inside.

[Image Manager]

5.Format HDD #2

HDD

Select function table 4.Image Manager >> 5.Format HDD #2 to create the BIG MASTER HDD format. Press " " to check information such as image names, used amount, etc.

HDD Goblin

4.Image Manager

[Image Manager]

5.Format HDD #2

Do FOMRAT Target Confirm?

FORMAT complete!

Notice

• For the first time to use a HDD as a BIG MASTER HDD, you need to format it by Goblin firstly.

• If Goblin shows Red light with error message “Target Hard Disc is not formatted” while select 1.copy,

please double check if you are using BIG MASTER HDD or if you have done the formatting before usage.

Function : Utility

Chapter 6.

Utility Function

1. Show Disk Info

The function will show basic information of both source and target HDDs. There are 9 items to choose ①Model Number, ②Version of Firmware, ③Serial Number,

Device Power Cycle, ⑤Power-on Hours, ⑥Reallocation Event Count, ⑦Off-

④

Line Scan Uncorrectable Sector Count, ⑧Seek Error Rate and ⑨Temperature.

Select function table 5.Utility >> 1.Show Disk Info. and press " " to enter and

press " " and " " to select source or target HDD to view its detail information.

HDD Goblin

5.Utility

Using " " and " " key to view information of source or target HDDs.

[Utility]

1.Show Disk Info

Select Device Device 1

Searching Source

1-1. Model Number

This function is to show model number of connected HDDs.

[Disk Info.]

1.Model Number

Model: Hitachi HTS725050A9A364

1-2. Version of Firmware

This function is to show firmware version of connected HDD.

[Disk Info.]

2.Version of Fir

Version: PC4OC70E

Function : Utility

1-3. Serial Number

This function is to show the serial number of connected HDD.

[Disk Info.]

3.Serial Number

Serial No: 1109 20PCK404GLJ2GN0J

1-4. Device Power Cycle

This function is to show the count of power cycle of connected HDD.

[Disk Info.]

4.Device Power C

[Device Power C] 869

1-5. Power-on Hours

This function is to show the total power-on hours of HDD operation.

[Disk Info.]

5.Power-on Hours

[Power-on Hours] 57

1-6. Reallocation Event Count

This function is to show the count of reallocating event of connected HDD. When the HDD fails to save data, it will need to redefine the location to store data. Therefore, more count of reallocation event represents more error occurring times.

[Disk Info.]

6.Reallocation E

[Reallocation E] 0

1-7. Off-Line Scan Uncorrectable Sector Count

This function is to show the sector volume of connected HDD that is uncorrectable when scanned off-line. The more the uncorrectable sector volume is, the more serious the damage of HDD is.

[Disk Info.]

7.Off-Line Scan

[Off-Line Scan] 0

Function : Utility

1-8. Seek Error Rate

This function is to show the error rate of searching for data. It can represent the damage rate of data stored in connected HDD.

[Disk Info.]

8.Seek Error Rat

[Seek Error Rat] 0

1-9. Temperature

This function is to show the temperature of connected HDD.

2. System Info.

The function will show Goblin system information. There are 4 items to show its information ①System version, ②System number, ③Build number, ④FPGA number.

Select function table 5.Utility >> 2.System Info. Press " " to enter and press " " and " " to view more Goblin system information.

HDD Goblin

5.Utility

[Utility]

2.System Info.

HDD Goblin Ver:2.31.8

3. System Update

This function enables to update the system BIOS/Firmware through BIOS HDD.

Step 1: Create Update HDD

The function is to create BIOS update HDD (a 2GB FAT partition) first before updating system firmware.

Function : Utility

Select function table 5.Utility >> 3.Update System >> 2.Create Update HDD >> Do FORMAT HDD#1 and press " ".

HDD Goblin

5.Utility

Notice

The purpose of creating a 2GB FAT partition is because 2GB FAT HDD partition can speed up the update process.

[Utility]

3.Update System

[Update System]

2.Create Update Do FORMAT HDD#1

Confirm ?

FORMAT complete!

Step 2: Update BIOS

Download the BIOS from the PC and save to BIOS HDD. Plug the HDD into source port of Goblin.

Select function table 5.Utility >> 3.Update System >> 1.Update BIOS.

HDD Goblin

5.Utility

Press " " key to start update process. The system will detect update file in the

root directory to complete system update. After completed, the system will be restarted. Wait for about 1 minute to finish the update process.

[Utility]

3.Update System

[Update System]

1.Update BIOS

[Update Process] Writing>>>

Notice

• During update process, please do NOT turn off the power or operate other steps at the same time,

otherwise it will damage the system permanently.

• While the system shows "Searching BIOS" and stops, please check whether update HDD is attached

to the source port or correct BIOS being used.

• Please make sure BIOS unzipped.

• Please make sure BIOS saved in the root directory instead of any new created folder.

• If BIOS or format of HDDs error, the system will show "No Update File!" Please format HDD in the

source port and download latest firmware from PC.

Function : Utility

Chapter 7.

Setup Function

1. Set Copying Area of HDD

This function is to select coping mode you would like to use. Appropriate copying area selected can greatly reduce operation time and have better efficiency.

Select function table 6.Setup >> 1.Copy Area and press " " to enter the settings.

2. Skip Error

Set the volume of errors that is acceptable to skip during the copying process. If it is very critical for content correctness, it is strongly recommended to keep the Skip Error as 0.

Select function table 6.Setup >> 2.Skip Error and press " ". Adjust the volume to skip from 0 to unlimited by using " " and " " key.

HDD Goblin

6.Setup

[Utility]

2.Skip Error

[Skip Error] 100

3. Language Choice

This function enables to select preferred language interface to view.

Select function table 6. Setup >> 3. Language and press " " to select language interface..

HDD Goblin

6.Setup

[Utility]

3.Language

4. Advanced Setup Function

The function is used to select advanced settings for unknown format and stop motor time.

Select function table 6.Setup >> 4.Advanced Setup.

Function : Utility

HDD Goblin

6.Setup

Press " " to start update process.

[Utility]

4.Advanced Setup

4-1. Copy or Skip Unknown Format

This function is used to select if copying the areas with unknown format. Set whether copy or skip all the unknown area even if the format is not identified.

Select function table 6.Setup >> 4.Advanced Setup and press " " to enter selection. Press " " again to choose to Copy Unknown during copying unknown formatted area. Otherwise, press " " once and select to Skip Unknown during duplication.

HDD Goblin

6.Setup

[6.Setup]

4.Advanced Setup

[Advanced Setup]

1.Unknown Format [Unknown Format]

Copy Unknown

4-2. Stop Motor Time

When the system finishes execution, the motor won’t stop running immediately. The function is used to set the time of motor stopping after finishing.

Select function table 6.Setup >> 4.Advanced Setup and press " " to enter selection. Use " " to select 2.Stop Motor Time; press " " and use " " and " " key to adjust seconds from 0 to 20 seconds. Press " " to confirm the seconds. The default parameter of waiting time is 5 seconds.

HDD Goblin

6.Setup

[6.Setup]

4.Advanced Setup

[Advanced Setup]

2.Stop Motor Tim [Stop Motor Tim]

5 seconds

Function : Utility

5. Restore to Default Setting

The function is to go back to the manufacturer’s default setting, once when you confirm to clear.

Select function table 6.Setup >> 5.Restore Default.

HDD Goblin

6.Setup

Press " " to enter clearing process. Press " " again to confirm restore; Press

" " to cancel. All parameter will be set to default after pressing " " button at the first warning message.

Warning: Clear Parameter

[6.Setup]

5.Restore Defaul

Warning: All Parameter wa

Appendix A. FAQ

Appensdix A. FAQ

Error Message Possible Reasons Troubleshooting

HDD Too Small!

Target Hard Disc is not formatted

Warning: No Device Exist

Warning: Bad Target HDD

No Update File!

Q&A

What is the compression of Goblin image file?

What is the maximum HDD capacity that Goblin can support?

Big Master HDD has no enough space.

1. You have formatted before.

2. Check if you are using Big Master HDD.

Source or Target HDDs cannot be found, not well connected or wrong format.

Target HDD cannot be found, not well connected or wrong format.

The system cannot find correct BIOS HDD.

Goblin does not do compression when transfer source HDD as an image file into the big master HDD. The contained data size will depends on the copy area you select and save the exactly data capacity on the big master.

For model HS268, it can support up to 32TB HDD (including Raid HDD). For model LS120, It can support up to 4TB. Please check your model number.

Go to function 4.Image Manger >> 2.Show Image Info. to check HDD capacity.

Go to function 4.Image Manger >> 5.Format HDD #2 to format Big Master HDD.

Check the format or connect it again. Go to function 4.Image Manager >> 1.Show HDD

Info. Go to function to format if necessary,

4.Image Manger >> 5.Format HDD #2, and

make sure to connect into target.

Check if the target HDD well connected or if it needs to be formatted. Go to function to check its information, 4.Image Manager >>

1.Show HDD Info.

Create one BIOS HDD. Download BIOS from PC to HDD. Go to function 5.Utility >>

3.Update System >> 1.Update BIOS to update system by that HDD.

Appendix B. Specification

Product Name Carry Goblin HDD Image Backup Marker

Product Number LS120 HS268

Source to Target duplication 1 to 1, HDD to Image, Image to HDD, HDD to HDD

Compatible HDD SATA/IDE/mSATA/eSATA/SDD/iVDR/Raid HDD

Transfer Speed 7.2GB/min 16GB/min

Source HDDs

Quick Copy (System and Files of all format)

Duplication Mode

Support Format of System and Files

Display Monochrome LCD

Control Button 4 Push buttons(△UP, ▽DOWN, ◯OK, ╳ESC)

Language for English device English, Japanese

Temperature

Humidity

Power Supply 100V~240V

Safety/ Certificate FCC, CE, RoHS

• The actual specification may subject to change without notice.

Storage 5˚C~45˚C

Working -20˚C~85˚C

Storage 20%~80%

Working 5%~95%

All Partition

Whole HDD

Percentage

Linux (ext2, ext3, ext4), Windows(NTFS, FAT16, FAT32, FAT64) Mac OS(HFS, HFS+, HFSX)

4TB 32TB

Goblin HS268 User guide

Specifications and Main Features

Frequently Asked Questions

User Manual