Goalo Elite NOMAD 13.5M Reference Manual

Reference Guide

Please read this guide BEFORE you use your gear!

Input Sources

13.5 Watt Mono-crystalline solar panel

Output Ports

Open circuit voltage: 18V
Charging voltage: 12V ± 2V

Product weight (no pkg) 1.5 lbs
Product dimensions 11" x 7" x 1"
Warranty Twelve months

Operating Temperatures

Optimal Operating Temperature 32-86F
Optimal Storage Temperature 32-104F

Tested and certified

Technical Specifications

Getting Started

Before using your NOMAD 13.5M for the first time, please
follow these simple steps.

1. Activate your warranty by registering your GOALØ gear
at http://www.goal0.com/warranty

2. Open the NOMAD 13.5M by unfolding its fabric case.

3. Remove the clear protective coverings from solar cells.

4. Locate the NOMAD’s stiffening rods in its internal
pocket.

5. Position the NOMAD at an angle that faces the sun.

6. Plug the NOMAD’s charging cable into your GOALØ
power pack.

You are now ready to power up!

Hint: The NOMAD’s performance is enhanced if you
occasionally adjust it’s angle to follow the path of the
sun. You can actually increase production by 200 to
400% by angling the NOMAD properly.