GN Audio USA GN9050 Users manual
GN 9050 Beta User Manual
GN 9050 WIRELESS HEADSET
SYSTEM
BETA USER MANUAL
1
Component list
1. Base station
2. Base stand
3. Remote
4. Interface cord
5. AC adapter
6. Battery
GN 9050 Beta User Manual
4
6
5
3
2
Remote Beltpack Functions
1. Headset Mode indicator-blinks when the system is in Headset mode, no light when
in handset mode.
1. Volume control- press + to increase volume and – to decrease volume
2. Mute button: Press to activate mute and press again to unmute.
3. Headset/Handset button/ handset lifter button : Press to enter Headset or Handset
mode (LEDs on the remote and base station light in Headset mode) No Lights in
Handset Mode. For use with optional handset lifter device, see handset lifter user
manual.
Base Functions
1. Transmit Settings: Adjusts the volume of your voice.
2. Telephone Compatibility Settings: Fine-tunes the system to your telephone system.
3. Battery Charge indicator: Lights when the remote is properly seated in the base
charger, blinks when battery is fully charged.
4. Base/Tone Control: Allows for choice of base and tone on receiver volume.
2
GN 9050 Beta User Manual
Audio Indicators
Mute Tone sounds in headset every 15 seconds
Out of Range Tone sounds in headset every 10 seconds
Low Battery Tone sounds in headset every 20 seconds
Volume Tone sounds in headset at max and min levels
Battery Information
Battery Type Nickel Metal Hydride (NiMH) 3.6 V 500 mAH
Capacity on-line Fully charged battery provides 6 hours of talk time
Capacity off-line Fully charged battery provides 80 hours
Recharging Time Maximum of 3 hours
Battery Life 2 years if battery is recharged when not in use
Basic Feature Set:
• 2.4GHz, Digital FH-SST radio system
• Up to 150 feet range from base station
• Minimum of 50 concurrent users in one location w/ encryption/ security.
• System continuously checks link availability and generates a “no link” beep in the
belt unit in the event the base unit and belt unit cannot communicate.
• 6 hours minimum portable talk time with standard battery
• 12 hours minimum talk time with optional spare battery
• Connects to almost any type of telephone set via the handset port (RJ-9 port)
• Transmit volume adjustable at base unit (8 steps) via up/down buttons
• Receive volume (loudness) adjustable at portable unit (8 steps) via volume up/down
controls
• Belt unit has a mute button
• Base unit docks and charges the belt unit and can also charge a second spare
battery
− Fast charging allows batteries to fully charge within 3 hours maximum.
• ON/OFF switch located on remote.
• Beep tones are used in the belt unit (earpiece of the headset) to indicate low battery,
mute, max and min volume and out of range
• Base unit has LEDs to indicate charging status, in-use indication
• Compatible with ReadiLine and GN Netcom handset lifter accessory
3
GN 9050 Beta User Manual
BASE FRONT
Spare battery
charge
indicator
Remote
charge
indicator
In-Use
Indicator
Where Remote docks
to charge
4
Base Stand
slot
Contacts for
Spare battery
Spare battery
slot
GN 9050 Beta User Manual
BASE REAR
In-Use
Indicator
Spare battery
charge
indicator
Host Port
AC
Power
Jack
To
Handset
AUX Jack
(underneath
plastic form)
5
To Phone
RJ-9
Loading...