How it Works
Gnatus
Loading...
Syncrus H
User manual
36 pgs1.02 Mb2

Gnatus Syncrus H User manual

2
PRESENTATION OF MANUAL
EQUIPMENT:
Technical Name: Dental Delivery Units and Accessories Trade Name: Syncrus H Delivery Unit Brand: GNATUS
Manufacturer/ Distribuitor:
Registration ANVISA #: 10229030047
INSTRUCTIONS FOR USE
ATTENTION
For greater safety:
Read and understand all the instructions contained in these
Instructions for Use before installing or operating this Equipment.
Note: These Instructions for Use must be read by all the operators
of this Equipment.
3
INDEX
PRESENTATION OF MANUAL ........................................................................02
IDENTIFICATION OF EQUIPMENT .................................................................04
- Dear Customer .............................................................................................04
- Identification ................................................................................................04
- Principles and bases applied to the functioning of the product .............................05
- Description of Equipment ..............................................................................05
- Indication of Equipment ................................................................................07
MODULES, ACCESSORIES, OPTIONS AND MATERIALS OF CONSUMPTION .....08
TECHNICAL SPECIFICATIONS .......................................................................10
- Technical features of the Delivery Unit and its accessories ...................................11
- Standards applied .........................................................................................13
- Dimension ....................................................................................................14
- Symbologies of packaging ..............................................................................15
- Symbologies of product ..................................................................................15
- Contents of the accessible and inaccessible markings .........................................17
INSTALLATION OF EQUIPMENT ....................................................................17
OPERATION OF EQUIPMENT .........................................................................17
- Turning on / off the dental set .........................................................................17
- Driving to the water in the basin to the model without the control panel ...............18
- Positioning ...................................................................................................18
- Activation of Terminals ...................................................................................18
- Adjustment of Spray ......................................................................................18
- Use of 3-Way Syringe ...................................................................................19
- Curing Light Activation ...................................................................................19
- Laser Hand Activation ....................................................................................20
- Ultrasound Activation ...................................................................................21
- “Ultrasound” techniques and applications ..........................................................22
- Equipment activation by the delivery unit panel ................................................24
- How to supply the reservoirs ...........................................................................25
PRECAUTIONS, RESTRICTIONS AND WARNINGS ..........................................26
- Conditions of transport and storage .................................................................26
- Environmental conditions of operation ..............................................................26
- Sensitiveness to environmental conditions foreseeable in normal situations of use .26
- Precautions and warnings “during the installation” of equipment .........................26
- Recommendations for preserving the equipment. ...............................................27
- Precautions and warnings “during the use” of equipment ....................................27
- Precautions and warnings “after” the use of equipment ......................................27
- Precautions and warnings during the “cleaning and disinfection” of equipment ......28
- Precautions in case of alteration in the functioning of equipment ..........................28
- recautions to be adopted against foreseeable or uncommon risks,
related to the deactivation and abandoning of equipment .....................................28
CORRECTIVE AND PREVENTIVE MAINTENANCE AND PRESERVATION............29
- Additional procedures for reuse .......................................................................29
- Cleaning ......................................................................................................29
- Preventive maintenance .................................................................................32
- Corrective maintenance..................................................................................32
UNFORESEEN EVENTS – SOLUTION OF PROBLEMS ........................................33
WARRANTY OF EQUIPMENT ..........................................................................34
FINAL CONSIDERATIONS ..............................................................................34
4
Dear Customer
Congratulations. You have made a good choice when you decided to buy a GNATUS QUALITY product comparable to the best products available in the World. This manual is a general presentation of your product and it will give you important details to help you to solve possible problems.
Please, read it and keep this with you.
Identication
Technical Name: Dental Delivery Units and Accessories
Trade Name: Syncrus H Delivery Unit
Brand: GNATUS
DESCRIPTION OF THE EQUIPMENT
5
Delivery unit for ambidextrous dental use (it handles both right-handers and left-handers),
ex model, coupled to the dental chair.
Central control panel (optional). Flexible, removable and autoclavable handpiece support, protecting them from impact.
Movement of the handpieces by means of retractable rods with lock for alleviating the stress in the hose, which makes the movements light, allowing greater closeness in the
operational field.
Swivel arms with ample movement both horizontally and vertically, with pneumatic locking, activated by a button located under the body of the delivery unit, providing smoothness of movement and stopping at the position desired. Front handle of easy access with a differentiated design.
Auxiliary tray made of steel with horizontal movement.
Body of the delivery unit made of high impact polyethylene.
Structure made of steel with surface treatment via nanotechnology. Smooth painting with a high gloss and epoxy base, polymerized in an oven at 250ºC, resistant to corrosion and cleaning materials.
Smooth hoses, without grooves or riing, rounded, light and exible.
It has translucent reservoirs easy to access with automatic pressurization of water for syringe/spray of the handpieces and chlorinated water for the “optional” Bio-System. The Bio-System is a disinfection system, which provides internal cleaning of the hoses and terminals via bactericidal liquid, preventing risks of cross contamination.
Connecting box, made of high impact polyethylene and having rounded corners.
To guarantee the safe functioning of your equipment, use only the assemble configurations
(Dental Chair, Dental and Water Units and Dental Light) supplied by Gnatus authorized Dealers / Technical Assistance.
EN ISO 9001/2000 and EN ISO 13485/2003 Quality System, assuryng the products are manufactured under standart procedures.
Products manufactured in agreement with RDC 59/00 - ANVISA - (Sanitary Surveillance National Agency).
DESCRIPTION OF THE EQUIPMENT
Description of Equipment
Principles and bases applied to the functioning of the product
It has hoses with compressed air and connectors for the supply of handpieces (high and
low rotation) and a syringe with air and water outlet.
6
Laser Hand Kit (optional item) – Features of the product:
See the Owner’s Manual - Laser Hand
Curing light (optional item) – Features of the product:
The Curing Light belongs to the newest generation of LED photo-activation devices. This abbreviation stands for Light Emitting Diode, a totally different type of light emission, if compared to conventional halogen equipment.
Unlike traditional devices, which generate wide-spectrum light and heat, this technology uses a cold light of the precise wave length needed to activate various dental products.
LED technology, which was recently introduced in Dentistry, brought about several useful features to those light-curing devices used in composite resin restoration. Besides being more durable, LED technology turned devices more compact, ergonomic and easier to install and transport. The emission of cold light within a precise wave length range ensures the safe cure of camphorquinone-activated composites, preventing dental heating, pulp damage or discomfort for both patient and dentist. Although being relatively new, this technology
is nowadays in its second generation. LED safety and efficiency, now allied to high-energy
emission, are available to all clinic procedures which require light-curing power, including bleaching treatments.
The light of 440nm-460nm wave length, allied to the high energy emitted by Curing Light, makes possible the multi-functionality of this device:
- Direct restoration procedures: composite resins, ionomers and adhesives.
- Indirect restorations: adhesive cementation of laminates, inlays, esthetic pins and
metal-free crowns.
- Dental Bleaching: activation of bleaching gel and polymerization of gingival barriers.
Compatible with 35% hydrogen peroxide-based bleaching gels.
- Attachment of braces and orthodontic accessories.
- Activation of light-cure materials, such as sealants, surgical cements and covering
bases.
Designed and built with cutting-edge technology, it meets the highest standards specified
by world’s dental authorities.
Operation control display in handpiece, sound alarm with beep every 10 seconds and 4 beeps at the end of the cycle.
Advantages offered by Curing Light:
- More spectrally-selective light than conventional lamps.*
- Cold light, it doesn’t heat up the resin nor the tooth**
• Light compact equipment that provides handling comfort.
• Low power consumption.
• Longer useful life of the light emitting diode (equivalent to 36.000.000 cycles of 10
seconds).
• It does not use optical filter.
• It does not require forced ventilation, thus avoiding noise emission.
We noted that the light emitted by the Curing Light is completely contained within the absorption interval of the photo starter, therefore it’s 100% used, whereas the conventional equipment running on halogen lamps has non-used wave-length regions.
The Curing Light doesn’t generate heat since it uses light emitting diodes.
The light conductor is removable, made out of high resistance polymer and of easy maintenance.
DESCRIPTION OF THE EQUIPMENT
7
DESCRIPTION OF THE EQUIPMENT
This equipment is for dental use use only. It must be operated and utilized by specialized
professional (certified professional, according to the legislation of the country) and following
the instructions of the manual. The operation of the equipment required, for the professional, the utilization of correct instruments and it should to be in perfect conditions of the use, and to protect the professional, the patients and others, in the eventual danger situation.
Indication of Equipment
Ultrasound (optional item) – Features of the product:
Piezoelectric Ultrasound, frequency of 30,000 Hz.
The Transducer with the piezoelectric system allows the insert to make precise and linear movements, being able to be used in widely differing dental specialties.
Fine adjustment of power, suited to each type of procedure.
In the procedures with cooling, it offers constant irrigation with control of ow.
It also allows dry work to be executed (condensation of amalgam, cementing of inlays/ onlays etc).
FUNCTIONAL APPLICATIONS
• Periodontics
• Endodontics
• Dentistics and Prosthesis
8
MODULES, ACCESSORIES, OPTIONS AND MATE RIALS OF CONSUMPTION
01
02
03
04
05 06
07 08
09
10
A
B
C
D
11
12
13
14
15
16
17
Syncrus H Delivery Unit
Th e Dra w ing illustrates the equipment with all the optional items. Your delivery unit will only be composed of the items chosen during your purchase option.
01 - X ray view (optional) 02 - Control panel (optional) 03 - Triple syringe 04 - Auxiliary trays 05 - High-speed-motor terminals (optional) 06 - Centered handle 07 - Low-speed-motor terminal (optional) 08 - Ultrasound (optional) 09 - Water valve for Syringe /FO/MME/ Ultrasound (optional) 10 - Arm brake valve 11 - Articulated arm 12 - Column arm
13 - Connection box 14 - Foot control 15 - Kit laser Hand (optional) 16 - Curing Light (optional) 17 - Bicarbonate jet “Hand”(optional) 18 - Drive button of the water in the basin (optional)
*Item B – Activation of X-ray viewer via side panel only when the delivery unit version does not have a control panel (02).
Basic configuration of the product (composed of)
1-3-Way Syringe, 2- TB/TM/FO high rotation terminals, 1-Terminal for TB/TM micro motor
The contents of this page are of an informative nature, the equipment being able to differ from that illustrated. So, upon acquiring the product check the technical compatibilty between equipment, coupling and accessories.
Side command (see page 10)
A - Regulator of ultrasonic power (optional) B - X-ray viewer activation (optional)* C - Main switch of delivery unit (optional) D - Manometer (optional)
18
9
MODULES, ACCESSORIES, OPTIONS AND MATE RIALS OF CONSUMPTION
01 02
03
04
05
07 08
06
09
10
MODULES, ACCESSORIES, OPTIONS AND MATE RIALS OF CONSUMPTION
01 - Terminals (optional)
- MME:Electrical micro motor terminal
- FO:Optical fiber terminal
- TM:Midwest terminal
- TB:Borden terminal
02 - Side command
- Regulator of ultrasonic power (optional)
“available in the delivery units configured with scaler”
- Main switch of delivery unit (optional)
- Manometer (optional)
- X-ray viewer activation (optional)
“available in the delivery units configured with X-ray viewer”
03 - X ray view (optional)
04 - Control panel (optional)
05- Drive button of the water in the basin (optional)
06 - Curing light + tip for 3 teeth (optional) 07 - Hand Laser kit (optional) (Nº Registration Anvisa 80051420005)
- Laser Hand
- Safety goggles “patient and professional”
- Manuals
08 - Ultrasound kit (optional)
- Ultrasound
- Tightening wrench
- Inserts “nº 1, 2 and 10P”
09 - Bicarbonate jet kit “Jet Hand”(optional)
- Bicarbonate jet
- Opener
- Covers for reservoir
- Rings for sealing
- Sachet of bicarbonate
- Manual
The use of any part, accessory or material not specified or foreseen
in these instructions for use is entirely the user’s responsibility.
The accessories described above shall never be able to be sold separately from the product.
11
TECHNICAL SPECIFICATIONS
Power Supply
Other specications
General
Technical features of the Delivery Unit and its accessories
Model Syncrus H Delivery Unit
Classification of Equipment as per ANVISA:
Class II
Classification of Equipment as per standard IEC 60601-1:
Protection against Electric Shock - Type B and Class I Equipment (IEC 60601-1) Degree of safety of application in presence:
Equipment not suited to an anesthetic mixture inammable with air, oxygen or nitrous
oxide. Mode of Operation Continuous operation with intermittent load
Power Supply Voltage (coming from dental chair) 127/220 V~ (Selectable) Frequency 50/60 Hz # phases Single Phase / Biphasic Input fuse (coming from dental chair) 5A Delayed action Voltage in equipment (coming from dental chair) 12 and 24 V~
Inlet air pressure 80 PSI (5,52 BAR) Inlet air pressure - Syringe 40 PSI (2,76 BAR) Maximum consumption of air (dental set) 80 l/min Capacity of water reservoir 800ml
Loading...
+ 25 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use