GM VENDING AVANT M 23, AVANT XL 39, AVANT L 30 Instruction Manual
AVANT
Cod. 21194-04 0
The manufactur
er, GMVENDING S.A., reserves the right to modify the product or its specifications without
prior notice. Also, it does not accept any liability for damages arising form improper use of the information
included in this manual.
This user manual is protected by international copyright laws. No part of this manual may be reproduced,
distributed, translated or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval without prior written consent by
.
INSTRUCTION MANUAL
AVANT
AVANT
Cod. 21194-04 1
CONTENT
1.- INTRODUCTION …………………………………………..………………. 2
2.- SAFETY INSTRUCTIONS ………………………………………..………. 2
3.- TECHNICAL SPECIFICATIONS …………………..……..………………. 3
3.1.- OPERATING SPECIFICATIONS …………………..……………..……. 3
3.2.- DIMENSIONS AND CAPACITY …………………...…………......……. 3
4.- MACHINE DESCRIPTION ………….…….………..……..………………. 4
5.- INSTALLATION AND START-UP……….......…..….…..……………..…. 5
5.1.- ELECTRICAL INSTALLATION .…………………...……………...……. 5
5.2.- LEVELLING …..………………………………………………...………… 5
5.3.- START-UP ……………….…………..……………...……………......…. 5
5.4.- RELATIONSHIP PRODUCT CHANNEL/SELECTIONS .………….… 5
5.5.- MAKING A PURCHASE ……………………………………………….... 7
6.- PROGRAMMING ..…………………………..……..………………………. 7
7.- MAINTENANCE ………………………...…………..……..…….……..….. 9
7.1.- DIAGNOSTIC OF MALFUNCTIONING ....………...……................…. 9
7.2.- CLEANING MACHINE EXTERIOR …....………...…….….........…… 10
7.3.- NOTES EXTRACTION FROM STACKER …….............………........ 10
8.- ELECTRICAL DRAWING ...………………………..…….…….…..……. 11
See online machine manuals:
Instruction Manual Programming Manual
AVANT
Cod. 21194-04 2
1.- INTRODUCTION
• The machine is prepared to sell tobacco in different formats, from a
short format to an extra long format.
• The partitions and extractors are moveable, so they can be adjusted to
different tobacco formats.
• It is possible to modify the machine variables very easily to adapt it to
the needs of each customer.
• The machine is designed for indoor use.
2.- SAFETY INSTRUCTIONS
• The machine should be attached to the wall to ensure its verticality.
• Check mains characteristics coincide with the machine’s and that the
machine is properly grounded.
• Access to the electrical parts of the machine only can be done by
authorized personnel.
• Before handling any component, disconnect the machine from mains.
• Should the mains cable be damaged call our technical support service.
• The machine should not be used for any purpose other than that
indicated by the manufacturer.
• The manufacturer shall not assume any liability for damages arising from
improper use of the machine.
• Always maintain the machine as indicated in the maintenance
instructions.
• This machine is not intended for be used by people (including children)
whose physical, sensory and mental abilities were reduced or they
haven’t the necessary experience or instructions about the use of the
machine by a person in charge of their security.
• Children should be supervised to be sure they don’t play with the
machine.
• The installation of this machine is not suitable in a place where flows of
water could be used.
• The machine won´t be cleaned with flows of water.
Read these instructions carefully before
starting up the machine.
AVANT
Cod. 21194-04 3
3.- TECHNICAL SPECIFICATIONS
3.1.- OPERATING SPECIFICATIONS
Voltage: 230 VAC
Maximum current: 0.5 A
Maximum power: 70 W
Temperature range: Between 0ºC and 55ºC
Humidity range: Between 35% and 95% relative humidity.
3.2.- DIMENSIONS AND CAPACITY
*In mm.
Unpacked
HEIGHT WIDTH DEPTH WEIGHT (Kg) CAPACITY
(Packs)
AVANT M 23
1700 650 420 128 514
AVANT L 30 1700 650 540 143 738
AVANT XL 39 1700 650 695 178 1032
Packed
HEIGHT WIDTH DEPTH WEIGHT (Kg)
AVANT M 23
1825 690 450 135
AVANT L 30 1825 690 570 150
AVANT XL 39
1825 690 765 186
AVANT M 23
AVANT L 30
AVANT XL 39
Loading...