Global Mixed-mode Technology Inc.
AT1316A
High Efficiency, Constant Current 20V WhiteLEDs Driver
Feature
Operating Voltage: 2.5V to 5.5V.
High Operating Frequency: 1MHz
High Output Voltage: Up to 20V(Typ.)
Digital Dimming Control.
Built-in Cycle-by Cycle Current-Limiting.
Built-in Soft-Start Function.
0.1V/0.2V/0.3V Low Reference Voltage
Thermal Overload Protection
TSOT-23-6 Package
Application
GPS Navigation System
Compact Back Light Module
Constant Current Source
LED Module
Ordering Information
ORDER
NUMBER
AT1316A-01TP1U 3A01x 0.1V -40°C to 85°C TSOT-23-6
AT1316A-02TP1U 3A02x 0.2V -40°C to 85°C TSOT-23-6
AT1316A-03TP1U 3A03x 0.3V -40°C to 85°C TSOT-23-6
Note: TP : TSOT-23-6
1 : Bonding Code
U: Tape & Reel
MARKING
Pin Configuration Typical Application Circuit
Description
The AT1316A step-up converter drives white LEDs with a
constant current to provide backlight in cell phones, PDAs,
and other hand-held devices. It features allowing series
connection of the white LEDs so that the LED currents are
identical for uniform brightness. An enable input can be
pulsed repeatedly to adjust LED’s brightness. The fast 1.0
MHz current-mode PWM control allows for smaller
capacitor and inductor. Fault condition protection uses
cycle-by-cycle current limiting to sense maximum inductor
current, thermal protection and over-voltage protection.
Also included soft-start eliminates inrush current during
start-up. The low reference voltage minimized the power
loss across the current-setting resistor.
The AT1316A is available in TSOT-23-6 packages.
VOLTAGE
TEMP.
RANGE
P ACKAGE
(Green)
※ Use the tantalum capacitor to eliminate inductor noise on
※ Use the tantalum capacitor to eliminate inductor noise on
LX
LX
GND
GND
FB
FB
Ver: 0.6
May 05, 2011
1
1
2
2
3
3
AT1316A
AT1316A
TSOT-23-6
TSOT-23-6
VIN
VIN
6
6
OVP
OVP
5
5
4
4
EN
EN
1
output terminal when you want to control dimming function.
output terminal when you want to control dimming function.
AT1316A
AT1316A
TEL: 886-3-5788833
http://www.gmt.com.tw