GMR STAMA Micro, STAMA Parker, STAMA Multi, STAMA Evo, STAMA Mini Operating Instructions Manual
...
GMR maskiner a/s
Saturnvej 17
DK-8700 Horsens
Tel. +45 7564 3611
www.gmr.dk
DK GB DE
SE
FR
Registration of Use ............................................................. 3
EU declaration of conformity .............................................. 5
General information ............................................................ 6
Safety requirements ........................................................... 7
Operating ............................................................................ 9
Maintenance ..................................................................... 10
Lead-acid batteries ............................................................11
Lithium-ion batteries ......................................................... 18
Marking/labelling............................................................... 23
Customer services and claims.......................................... 24
Operating Instructions
STAMA Micro, Parker, Mini, Multi,
Evo, Maxi EL
GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
Registration of Use
Page 3
Operating Instructions
GB
Registration for use:
Machine number
Delivery date
Model
End user
Address
Dealer
STAMA manufactures quality machines for professional users.
The warranty period on our machines is 12 months from the purchase date, and covers any material
or manufacturing defects.
Any parts that have suffered damage as a result of material and production faults will be replaced
by GMR maskiner a/s at no charge.
Compensation will not be given for consequential damage or wearing parts.
A condition for the processing of claims is that this registration for use is submitted to GMR maskiner a/s
no later than 1 month after delivery to the user.
This can be done on our website at www.gmr.dk
or by lling in and forwarding or scanning the form below to: GMR maskiner a/s
Saturnvej 17
DK-8700 Horsens
stensballe@gmr.dk
GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
EU declaration of conformity
Page 5
Operating Instructions
GB
EU declaration of conformity
Manufacturer: GMR maskiner a/s
Saturnvej 17, 8700 Horsens, Denmark
Tel.: +45 7564 3611
hereby declares that
machine: STAMA
machine no.:
date:
is in conformity with the applicable requirements of:
Directive 2006/42/EC of the European Parliament and of the
European Council of 17 June 2006 on the approximation of
the laws of the Member States relating to machinery.
Signature:
GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
General information
Page 6
Operating Instructions
GB
Please read the Operating Instructions before you start to use your new
STAMA truck.
If you are in any doubt, contact the dealer.
Use only original STAMA parts in your electric truck. To order original
parts, contact your dealer or GMR maskiner a/s directly.
The truck is fully assembled and tested at the factory. It is ready for
use.
The STAMA truck is a product, the design of which is based on
the practical experiences of users, e.g. graveyards and housing
associations.
General comments
GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
Safety requirements
Page 7
Operating Instructions
GB
The truck starts smoothly and continues to accelerate until it reaches
maximum speed.
Acceleration
Intended use
Normal use
The truck is intended to carry stone, gravel, soil, branches and waste.
Max last, Micro = 350 kg
Max last Parker = 500 kg
Max last, Mini = 750 kg
Max last, Multi, Evo and Maxi = 1000 kg
The operator must sit on the seat when driving. The truck stops if
contact with the seat is interrupted for more than 1 second.
Light The operator must ensure that there is sufcient light when driving the
truck so that potential obstacles are clearly visible.
Maximum speed Micro 12 km/h
Parker and Mini 15 km/h
Mini 15 km/h
Multi and Evo 20 km/h
Maxi 16 km/h
The top speed is electronically controlled and can be lowered. Contact
GMR maskiner.
Trailer total weight Without park brake With park brake
Mini and Parker 350 kg 700 kg
Multi 500 kg 1000 kg
Maxi 500 kg 1000 kg
Evo 970 kg 1940 kg
GMR maskiner a/s
STAMA Micro, Parker, Mini, Multi, Evo, Maxi EL
Safety requirements
Page 8
Operating Instructions
GB
Vibrations There are no signicant vibrations as the machine is electrically
powered.
Disposal When disposing of the truck, the battery should be recycled. The
remainder of the truck should be disposed of by a scrap dealer.
WARNING
Moving parts
Take care not to allow people or objects to get
crushed when tipping the truck bed.
WARNING
Safety guards
When the truck is in operation, all safety guards must
be secured.
WARNING
Maintenance
Before starting maintenance work, bring the truck to a
complete standstill to ensure that there is no danger
of personal injury due to moving parts.
The truck speed should be adapted to the conditions, i.e. reduce
speed at corners and in narrow passages. There is a risk that the truck
may overturn when travelling on an incline. Never drive on an incline
of more than 20° across the direction of travel. When travelling fully
loaded down a steep hill, the truck must travel at very slow speed
(tortoise mode). If you drive too fast down a hill, the truck may (worst
case) run out of control. Make sure the brakes are in good working
order at all times.
Max. incline in direction of travel:
• about 40% over a distance of 0.5 metres
• about 20% over a distance of 1-2 metres
• about 15% over a distance of 3-5 metres
If the incline is steeper and the truck fully loaded, there is a risk that the
truck will stall on the incline and (worst case) may roll backwards.
Speed, slopes and in-
clines
Loading...