PROGETTI SRL
ECG Machine EPG 12 VIEW
Service Manual (Version 1)
PROGETTI SRL
Declaration
This Service Manual is intended for Progetti ECG machine EPG 12 VIEW.
We hold the copyright for this non-public publication and reserve the right of keeping it confidential.
This Manual is only used as a reference for operation, maintenance and repair, and other persons
are not authorized to disclose its content to any third party. We shall not be held legally responsible
for any servicing based on this Manual without our permission.
This Manual contains proprietary information protected by the Copyright Law. Photographing,
photocopying or translating any part of this Manual into other languages shall be not allowed without
our prior written approval.
All information in this Manual is accepted as correct. We shall not be held legally responsible for any
mistake in this Manual or any occasional or inevitable damage caused by improper installation or
operation. We do not provide the proprietary right attached to the patent to any other party and shall
not assume any legal responsibility for any legal consequence arising from a breach of the Patent
Law or the rights of any third party.
This Manual is subject to change without further notice.
Manufacturer’s Responsibilities
Only in the following cases shall we take responsibility for the security, reliability and performance of
our instrument:
Assembly, extension, re-adjustment, modification and repair are all done by the personnel we
approve;
The relevant electric equipments used for this machine satisfy the national standards;
The instrument is used under the operating instructions.
PROGETTI SRL
Content
Chapter 1 Removal and Installation of the Main Parts ------------------------------------------ -----
Chapter 2 Troubleshooting-------------------------------------------------------------------------------- -----
2.1 Failure to Power on with AC Supply ----------------------------------------------------------------- -----
2.2 Failure to Power on with Battery -------------------------------------------------------- --- --------- -----
2.3 White Screen-------------------------------------------------------------------------------------------- -- - ---
2.4 Abnormal Screen Display ------------------------------------------------- ------------------------------ ----
2.5 Normal Display of Characters and Leads without Baseline------------------------------------------
2.6 Print Head Failure----------------------------------------------------------------------------------------- -----
2.7 AC Disturbance---------------------------------------------------------------------------- ---------------------
2.8 Electromyographic Disturbance --------------------------------------------------------------------------
2.9 Unstable Baseline-------------------------------------------------------------------------------------- -------
Chapter 3 The end of EPG 12 VIEW service manual--------------------------------------------------- - ---
PROGETTI SRL
Chapter 1 Removal and Installation of the Main Parts
Step 1: Taking off the screws (put the instrument on the foam to avoid scratching its cover).
Fig. 1