GME GS650 User Manual

marinE

SPEaKErS

GS650
InStructIon manual

introduction

Congratulations on your purchase of the GME Marine Speakers.

These speakers are designed to the highest level of quality and will offer you years of
listening enjoyment.

Thank you for making GME your choice for marine audio equipment.

mountinG

1. When mounting the speakers in the kick panel, make sure there
is a clearance of 65 mm (2.56”) behind the well.

SuPPLiEd in tHE BoX

•

2 x S6+ white speakers with grilles

•

2 x 5 metre lengths of speaker cable

•

8 x mounting screws

•

8 x mounting clips

•

1 x mounting template

•

1 x instruction manual

mountinG inStructionS

PrEcautionS

1. Please avoid contact with inside speaker wire

2. Do not change the polarity of the speaker terminal assembly

(7.4”)

188

145

(5.7”)

65

(2.56”)

2. Use the template supplied to mark the position of the mounting screws and the outline
of the speaker hole. Drill the mounting holes using a

3.3 mm drill bit and cut the hole for the speaker.

connEctinG

1. Attach the speaker wires (supplied) to the speaker terminals be sure to connect the
striped wire to the negative (–) terminal, and the other wire to the positive (+) terminal
of the speaker. Connect the other end of the speaker wires to your amplifier/stereo.

3. Make sure lead and speaker terminals do not contact metal.

4. When making connections, please refer to the instruction manual
of marine stereo used.