GME
User Manual
Rev. 1.0
TEST INSTRUMENT SAFETY GUIDELINES
WARNING
An electrical shock of over 10 milliamps of current to pass through the heart will stop most human
heartbeats. Voltage as low as 35 volts dc or ac rms should be considered dangerous and hazardous
since it can produce a lethal current under certain conditions. Be sure to observe following safety
precautions:
1. Do not expose high voltage needlessly in the equipment under test. Remove housings and
covers only when necessar y. Turn off equipment whil e making test connecti ons in high-voltage
circuits. Discharge high-voltage capacitors after removing power.
2. If possible, familiarize yourself with the equipment being tested and the location of its high
voltage points. However, remember that high voltage may appear at unexpected points in
defective equipment.
3. Use an insulated floor material or a large, insulated floor mat to stand on, and an insulated work
surface on which to place equipment; make certain such surfaces are not damp or wet.
4. When using a probe, touch only the insulated portion. Never touch the exposed tip portion.
5. When testing ac powered equipment, remember that ac line voltage is usually present on some
power input circuits such as the on-off switch, fuses, power transformer, etc. any time the
equipment is connected to an ac outlet, even if the equipment is turned off.
Limited One-Year Warranty
GME Technology war rants to the original pur chaser that this product and the component parts thereof, will be
free from defects in workmanship and materials for a period of one years from the data of purchase. GME
Technology will, witho ut ch arge, rep air or rep lace, at its ’ option, def ectiv e produc t or component parts . Retur ned
product must be accompanied by proof of the purchase date in the form a sales invoice or receipt.
Term and Conditions
• The warranty peri od is based upon the invoice date of the original purchase by the end-user.
• Warranty only applies to defects in materials and/or workmanship, which occur during normal use.
• Warranty does not apply to those products that are damaged due to misuse, abuse, negligence or
modification.
• Warranty does not extend to any damag e that occurs in ship ment or due to natural phenomenon (i.e.
lightning or line surges).
• Warranty will be voided if the original serial number on the product is removed by accident or
intentionally
This warranty gives you specific rights and you may have other rights, which vary from state-to-state.
Service & Repair
The following are procedure for returning a GME product for servicing and repair. Turn around time
for repair is normally within five (5) working days excluding shipping time.
RMA Procedure
Before sending your GME product in for service, be sure to contact GME Technology first to
obtain a RMA number. If your product is still under warranty, please send in the product along with a
copy of the invoice or receipt showing the date when the product was purchased. If the warranty has
already expired, please ask for the repair cost when you contact GME Technology for the RMA
number and include a check or money order for the repair cost when you send in the product.
Please make check payable to: GME Technology
You may send your GME product to our service & repair department at:
GME Technology
ATTN: Service & Repair Department
380 S. East End Ave., #H
Pomona, CA 91766
Be sure to include a note showing your RMA number, your name, telephone number, return address,
and a description of the problem with the product.
For the most recent support information, please visit GME Technology website at
www.gmetechnology.com/support
Loading...