GMC PORTABLE GASOLINE GENERATOR, Yukon, Sierra, Sierra 4800 Owner's Manual

PORTABLE GASOLINE GENERATOR
OWNER'S MANUAL
Customer Support
1-866-409-4581
2 Customer Support: 1-866-409-4581
TABLE OF CONTENTS
INTRODUCTION__________________________________2 IMPORTANT SAFETY INSTRUCTIONS________________3 LOCATIONS OF IMPORTANT LABELS ________________7 CONTROL PANEL AND GENERATOR COMPONENTS ___8 CONTROL PANEL FEATURES_______________________9
Low Oil Shut Off System__________________________ 9 V.F.T. Digital Meter Display_________________________9 Circuit Breaker __________________________________9 Circuit Protector _________________________________9
ASSEMBLY _____________________________________10
Packaging List _________________________________10 Wheel & Handle Kit Assembly Installation ____________11
OPERATING THE GENERATOR ____________________12
Pre-Operation Checklist __________________________12 Starting the Generator ___________________________16 Using Electric Power ____________________________18 Stopping the Generator __________________________22 High Altitude Operation __________________________22
MAINTENANCE__________________________________23
General Inspection & Maintenance Rules ____________24 Maintenance Schedule___________________________25 Engine Oil_____________________________________26 Air Filter Cleaning_______________________________27 Sediment Cup Cleaning __________________________28 Spark Plug Service______________________________28 Spark Arrestor Maintenance_______________________29 Cleaning Exterior of Generator ____________________29
TRANSPORTING & STORAGE _____________________30
Transporting ___________________________________30 Storage_______________________________________30
TROUBLESHOOTING_____________________________31 SPECIFICATIONS________________________________32
Wiring Diagram_________________________________32
WARRANTY ____________________________________33 PRODUCT REGISTRATION________________________36
INTRODUCTION
Thank you for purchasing a GMC╟Portable Gasoline Generator.
Record the model and serial numbers indicated on your generator´s nameplate:
Model No. ________________________________________
Serial No._________________________________________
Date of Purchase: __________________________________
Store/Dealer: ______________________________________ _________________________________________________
The GMC╟Trademark is used under license from General Motors Corporation. GMC╟or General Motors Corporation makes no representation or warranties with respect to this product.
3Customer Support: 1-866-409-4581
How to find a local service center: Even quality built equipment, such as the GMC╟Portable
Gasoline Generator you purchased, might need service or repair parts. Contact the California Air Tools GMC╟Generator Customer Service Department:
Phone: 1-866-409-4581 Online: www.GMCGENERATORS.com
Please provide the information below:
n
Model number and Serial number and specifications shown on the Model number/Serial number plate.
n
Part number or numbers shown in the parts list section of the owner’s manual for your generator model.
n
A brief description of the trouble with the generator.
If replacement parts are required for the engine, contact the engine manufacturer´s service center.
Do not return your generator for service or parts to the store/dealer where purchased or any GMC╟or GM car/truck dealership.
Thank you for purchasing a GMC╟Portable Gasoline Generator. Your GMC╟Portable Gasoline Generator is designed to provide a
portable source of electricity in temporary or remote applications, including emergency situations.
Your generator is intended for OUTDOOR USE ONLY. Please retain this manual for future reference. It contains
important safety instructions and warnings, and has been prepared to provide you with accurate and complete information about your generator. We reserve the right to modify this document and/or the design of the product without prior notice.
Please do not hesitate to contact the California Air Tools GMC
Generator Customer Service Department. Call 1-866-409-4581 or visit www.GMCGENERATORS.com.
Your generator meets the emission requirements of Environmental Protection Agency guidelines.
Safety Messages & Signal Words:
4 Customer Support: 1-866-409-4581
5Customer Support: 1-866-409-4581
6 Customer Support: 1-866-409-4581
7Customer Support: 1-866-409-4581
LOCATIONS OF IMPORTANT LABELS
Read these important labels before operating. These labels provide important safety and maintenance
information. These labels should be considered as permanent parts of the generator. Should any of these labels become illegible, damaged or removed, please contact California Air Tools GMC╟Generators Customer Service department at 1-866-409-4581 for replacements.
B J
D
H
F
A
I
G
C
E
8 Customer Support: 1-866-409-4581
CONTROL PANEL AND GENERATOR COMPONENTS
CONTROL PANEL
n
V.F.T. Meter (Voltage/Frequency/Time)
n
Voltage Selector
n
Circuit Breaker
n
DC 12V
n
Ground
n
AC 120V/240V
n
AC 120V (G.F.C.I.)
n
AC Circuit Protectors
GENERATOR COMPONENTS
n
Handles
n
Control Panel
n
Wheels
n
Oil Cap/Dipstick
n
Stand
n
Engine
n
Fuel Tank
n
Fuel Gauge
n
Recoil Starter Grip
n
Air Filter
n
Fuel Valve
n
Choke Lever
9Customer Support: 1-866-409-4581
CONTROL PANEL FEATURES
Low Oil Shut Off System
The low oil shut off is designed to prevent the engine from being damaged because of a lack of oil in the crankcase. Before the oil level falls to an unsafe level the engine will shut off. Although the engine is automatically shut off, the engine switch will still remain in the ON position.
Turn off the generator immediately and add the proper amount of oil to the engine. Refer to the Maintenance Schedule and the Engine Oil section.
V.F.T. Digital Meter Display
The V.F.T. digital meter displays the running voltage, the running frequency and both the current time of use and the continuous time of use for maintenance purposes.
Circuit Breaker
The circuit breaker protects the individual circuit protectors and the 30A 120V/240V receptacle. The circuit breaker will automatically switch OFF if the circuit is overloaded or if the appliance plugged into the circuit is faulty. If the circuit breaker is switched OFF automatically, check that the appliance is working properly and that it does not exceed the rated load capacity of the circuit before switching the circuit breaker ON again.
Circuit Protector
The circuit protectors will automatically switch OFF if the individual
circuit is overloaded or the appliance plugged into the circuit is faulty. If the circuit protector is switched OFF automatically, check that the appliance is working properly and that it does not exceed the rated load capacity of the circuit before resetting the circuit protector by pressing the reset buttons.
10 Customer Support: 1-866-409-4581
ASSEMBLY
Packaging List
Generator Wheel & Handle Kit Assembly
n
Wheel axle (1)
n
Wheel (2)
n
Bolt M8X16 (6)
n
Nut M8 (8)
n
Washer (2)
n
Split pin (2)
n
Axle holder (2)
1 L Engine Oil
Tool Kit
Owners Manual
n
Stand (2)
n
Connecting block (2)
n
Handles (2)
n
Handle sleeves (2)
n
Bolt M8X40 (2)
n
Cotter pin (2)
11Customer Support: 1-866-409-4581
1. Mounting axle diagram
2. Shorter end
3. Longer end
4. Wheel axle (1)
5. Wheel (2)
6. Bolt M8X16 (6)
7. Nut M8 (8)
8. Washer (2)
9. Split pin (2)
10.Axle holder (2)
11. Stand (2)
12. Connecting block (2)
13. Handle (2)
14. Handle sleeves (2)
15. Bolt M8X40 (2)
16. Cotter pins (2)
Wheel & Handle Kit Assembly Installation
1. Slide the wheels (5) over the axle (4) on both ends, then slide on the two washers (8) and insert the two split pins (9) into the axle and spread apart.
2. Mount assembled axle (4) to the frame with axle holder (10), bolt (6) and nut (7). Refer to diagram #1.
3. Fit the two stands (11) on the frame with the two bolts (6) and nuts (7).
4. Fit the two handles (13) on the connecting block (12) with the two bolts (15) and nuts (7), then mount the assembled handle on the frame. Use the two cotter pins (16) to hold handles in an upright position.
Loading...
+ 25 hidden pages