Gmate WHeeL System User Manual

User's Guide

Thank you for purchasing the
Gmate™WHeeL System.

Please read this User's Guide
thoroughly before using, and
ensuring correct operation.

Please keep this User's Guide in
safe place for your future reference.

Gmate™WHeeL is very easy to carry around and used for
measuring the glucose level by whole blood whenever you need.
It is also very simple, easy to use and smart. You don't worry
about coding your meter, the Gmate™WHeeL does it
automatically. is only used for testing glucose
level and using only fresh capillary whole blood samples.

is intended for use outside the body (
diagnostic use) by people diabetes at home and by healthcare
professionals in clinical setting. should not be
used for the diagnosis of diabetes without the guidance of a
healthcare professional or for the testing of newborn.

Gmate™WHeeL

Gmate™WHeeL

Gmate™WHeeL

in vitro

Gmate™WHeeL meter has wheel button
to eject the used strip easily and simply.

The small size with stylish design and
ease operation, allows you can bring
everywhere.

Shows much useful information.

Requires very small volume(0.5 L) and
display the result within 5 seconds.

Measures glucose level of whole blood by
AST(Alternate site testing).

No need to change Code number or to

μ

Features

1

2

3

4

5

6

TableofContents

About Gmate™WHeeL
Before Starting
Name and Funtion
Cautions
Obtaining Blood Drop
About Alternate Site Testing
Testing Your Blood Glucose
Control Solution Testing
Reviewing Results
Setting the Meter
Replacing the Battery
Error Messages
Troubleshooting
Performance Characteristics
Caring for System
Specifications

4
5

7
10
13
16
18
22
25
28
32
33
35
36
38
40

About Gmate™WHeeL

Gmate™WHeeL includes:

1. Gmate WHeeL Meter

2. Carrying Case

3. Lancing Device

4. Lithium Battery(CR2032)

5. Gmate Blood Glucose Test Strips

6. Lancets

™

™

Documents in your system include this USER’S GUIDE, QUICK

Before Starting

Symbols

SN

Caution, see instructions for use

Single use only

Expiration date

Serial number

Lot number

Diagnostic medical device

Manufacturer

Authorised representative

Symbol for temperature limitation

Consult instructions for use

Biological risks

Contains sufficient for <n> tests

Direct current

Separate disposal from other household waste

In Vitro

Before Starting

Test principle

The Gmate™WHeeL is designed for detecting a small electrical
current variation, which produced by the reaction of glucose in the
blood sample with the reagents on the strip. This current is varied
by the amount of glucose in the blood sample. The current
variation is calculated to glucose concentration of sample.

Your Gmate™WHeeL comes with a preset time, date and year.
Before your first using the meter, or when you change battery, you
should check the setting of time and date for your local time zone.
In case of you don’t set your meter at first time or after changing
battery, you can hear beep 3 times when inserting a test strip.
See the 28 page(Setting the Meter).
There are two types of glucose units: mg/dL and mmol/L. Your
Gmate™ meter does not allow you to change the glucose unit
yourself in order to prevent misinterpretation of the test results.
The glucose unit has been preset before leaving our factory. If
you have received a Gmate™ meter with the glucose unit
different from the method you use to measure your glucose

Setting the time and date

Gmate™WHeeL is intended to be for personal self-testing to
monitoring glucose concentration in fresh whole blood. Gmate™
WHeeL can apply for outside body( diagnostic use) on
fingertips, forearm, upper arm, hand, thigh and calf.

in vitro

Intended Use

Names and Functions

Display test result and other information.

Review stored results and adjust
parameters in setup mode. You can turn
the meter off by pressing '<' button and '>'
button at same time.

Remove the tested strips by rolling.

Insert the Gmate™ Test Strip. The meter
will turn on automatically when inserting
the test strip.

Display Screen

Buttons

Eject Wheel

Insert into test strip slot while facing up.

Sample Tip

Electrodes

Front View

Test Strip Port

Names and Functions

Transfer test results to computer(Cable is
optional.)

Data Port

Side View

Battery Cover

Slide cover off for replacing battery.

Names and Functions

1. Indicates strip code number.

2. Displays current mode.

3. Warning when the battery is low or
need to be replaced.

4. Display test results and messages.

5. Indicate ready to test.

6. Indicates abnormal temperature
warning.

7. Display measuring unit.

8. Display current time.

9. Indicates alarm.

10. Display date and year.

Display

Clear AST cap

Adjustable cap Lancet holder

Lancet ejector

Release button

Sliding barrel

AvgMem

Set

mg/dL

am
pm

C

* Clear AST cap is an optional accessory.
Please contact your local distributor.

Cautions

The Gmate™WHeeL is intended for use
outside the body ( diagnostic use)
only.

The uses only the fresh
capillary whole blood for measuring.

The must use with

Test Strip and Control

Solution.

Do not use the for
diagnosis of diabetes without the guidance
of healthcare professional, for testing on
newborns and with arterial blood.

The contains small parts
that may be dangerous if swallowed.

Check the packages when purchasing and
before using the .

Before operating, be sure to read User's
Guide and Insert found in test strip
container carefully.

Do not make any of medical relevance
decision without consulting your physician

in vitro

Gmate™WHeeL

Gmate™WHeeL

Gmate™ Gmate™

Gmate™WHeeL

Gmate™WHeeL

Gmate™WHeeL

Cautions
for System

Cautions

Cautions
for Meter

Keep the out of children’s
reach. When a children swallowed battery
or battery cover accidentally, consult with a
doctor immediately.

Do not dispose the battery into fire.

Do not disassemble or modify the meter.

Do not attempt to severe shock, drop or
step on meter.

The is not waterproof. Do
not wash by water or touch it with wet
hands.

Do not wipe the meter with chemical
solvent or abrasive cleaners.

Avoid the being exposed
to high temperature, high humidity, rain
and/or dust when using or storing.

Do not test instantly when the

moves to where sudden
temperature changes. Please wait 20
minutes and start testing.

Gmate™WHeeL

Gmate™WHeeL

Gmate™WHeeL

Gmate™WHeeL

Cautions

Cautions
for Test Strip

Store Test Strip in a cool, dry place
between 2°C and 32°C(36°F and 90°F).

Keep away from direct sunlight and heat.

After taking a test strip out of the container,
close cap tight immediately.

You may get inaccurate result if container
cap remains opened long time.

Don't drop the blood sample on the surface
of strip directly.

Do not press test strip against your finger. It
may affect bad aspiration of blood sample
aspiration.

Do not use a test strip that looks damaged
and/or used. Test strips are for single use
only.

Store the test strips in their original container.

After you take a strip out of the container, be
sure to use it within three minutes.

Use test strips within 3 months(90days) after
opening the container.

By clean and dried hands, you may touch
when taking out test strip and/or insert to

Gmate™

Obtaining Blood Drop

Wash and cleaning your hands carefully
with soap and warm water for increasing
the blood circulation in finger vein.

Dry hands thoroughly until pricked skin is
dried off.

STEP 1

Unscrew the lancing device cap by turning
counter-clockwise while holding firmly.

STEP 2