Page 1
Trip2™ Features:
• Glyph’s FireWire bridging technology
engineered for audio & video.
• True FireWire hot-swappable hard drive
technology ensures consistent,
t ra n s p o rtable performance.
• FireWire interconnectivity backplane
maintains data integrity and reliability.
• Can be configured with over a
terabyte of storage.
• QuietMetal™ reduces noise from
vibration.
• High performance, 7,200 RPM
hard drives.
™
Trip2
ARe volution in Ho t - Swap Te c h n o l o g y.
Are you ready for performance beyond your expectations? Whether you’re
recording, mixing, editing or capturing, in any production environment,
the Trip2 will reward you with a stress-free storage experience. Since Glyph
puts its Oxford 911- based bridge board in the tray with every drive, you can
be assured that your data integrity and performance will be consistent
wherever you take it.
Trip2 is specifically designed for high-resolution audio, and the
high-bandwidth requirements of video.
multiple drives will allow you to achieve maximum track counts at today’s
high sample rates. With video production, the high-performance 7,200
RPM hard drives deliver the huge capacity and speed necessary for the job.
Plus, the Trip2 is ultra quiet employing Glyph’s QuietMetal™ which reduces
noise from vibration.
Trip2 comes with your choice of two to six hot-swappable drive s .
Available options for the Trip2 SCSI/FireWire expansion bay are: AIT
backup, SCSI hot-swap receiving bay, DVD-R/RW and CD-R/RW.
Allocating audio files to
• Active monitoring of power supply and
external FireWire bus.
• Standard configurations include: 2-6
Hot-swappable hard drives,
backup, SCSI hot-swap receiving
bay, DVD-R/RW and CD-R/RW
• Two FireWire ports accessible on
front panel.
AIT
Extending the reach of the Trip2, Glyph has introduced a single
FireWire Hot-Swap Tabletop receiver.
purchase of a Trip2 so you can take your work on the road. In any audio
environment, the Trip2 offers options that go way beyond an off-the-shelf
storage system.
And its included with every
8 0 0 . 3 3 5 . 0 3 4 5
g l y p h t e c h . c o m
Page 2
Trip2 Sp e c i f i c a t i o n s
• Capacity per drive: 60GB, 120 GB, 180 GB - 7200RPM.
• Dr i ve Configuration: Ho t - Swappable Ha rd Dr i ves,
A I T Tape Ba c k u p, DV D - R / RW
Freedom to move with Glyph’s Trip2™ Tabletop.
The Hot-Swap FireWire Tabletop Receiver accepts the same
drive/tray technology as the Trip2. It includes a built-in power
supply and standard dual 6-pin powered FireWire interface.
Imagine being able to record in the studio, pull the FireWire drive
and take it home to mix the record there.
You can move projects from one room to another; you can
track directly to it, or use a different drive for each client’s work.
You can send a drive home with a customer, or use one drive to
back up the data on another one. The possibilities are endless
with this receiver and tray design.
What sets this system apart from all other “Hot-Swap
FireWire” products is that the Glyph hot-swap interface operates
according to the IEEE 1394a standard. The bridge board is built
into the drive/tray. One of the benefits of FireWire is hotswappability, which means you remove or insert the tray at the
FireWire interface level.
• Interface Connectivity: IEEE 1394
• Bridging Chip: Oxford 911
• Average Read Seek Time - HDD: 8.2 msec
• Max External Transfer Rate: >36 Mby t e s / s e c
• Average Read Sustained Transfer Rate: >36 Mby t e s / s e c
• MTBF: 1,000,000 hours
• Power Supply (volts AC): 90-240V AC 50/60 Hz
u n i versal auto switching
• Available power output (watts): 450w
• Operating Te m p e r a t u re (°F/°C): 50°F to 95°F / 10°C to 35°C
• Operating Humidity: 30% to 80% (assuming no condensation)
• Form Configuration: 3U Rack Mount En c l o s u re
• Weight (fully loaded): 40.4 lbs. / 18.32 kg
• Physical Dimensions (H x W x D): 5.25 x 19 x 17.32 in /
13.33 x 48.26 x 43.99 cm
• Warranty:
- 5 years: Trip2 Storage System
- 1 year: Storage subsystems included in the Trip2: FireWire
re m ovable hard drives, tape backup drives and optical drive s
- 1 year: Advanced Overnight Replacement on all
removable hard drives
Included with Tr i p 2
(1) Tabletop hot swap re c e i ve r
(1) Glyph Audio Storage Toolkit So f t w a re
(2) Fi re Wi re cables (2 meters)
(2) Power cable
(4) Rack mounting screws
810008-1.04 Trip2 DATA.pdf
© Glyph Technologies, Inc., June 16, 2003
Quiet like other Glyph products, hard drives and fans are
mounted on Glyph’s QuietMetal™. Made from a composite metal
technology, QuietMetal™ enables ultra-quiet operation for your
studio environment.
Trip2 Audio Track Count Results
Sample Rate 48kHz
Activity 1 drive 2 drives 4 drives 6 drives
Record (no edits) 50 86 128 128
Play (no edits) 50 86 128 128
Edit Density 1st level 50 86 128 128
Edit Density 2nd level 50 86 128 128
Edit Density 3rd level 41 76 128 128
Edit Density 4th level 35 68 104 118
Sample Rate 96kHz
Activity 1 drive 2 drives 4 drives 6 drives
Record (no edits) 40 64 64 64
Play (no edits) 40 64 64 64
Edit Density 1st level 38 64 64 64
Edit Density 2nd level 38 64 64 64
Edit Density 3rd level 38 59 64 64
Edit Density 4th level 28 47 64 64
Sample Rate 192kHz
Activity 1 drive 2 drives 4 drives 6 drives
Record (no edits) 24 24 24 24
Play (no edits) 24 24 24 24
Edit Density 1st level 20 24 24 24
Edit Density 2nd level 20 24 24 24
Edit Density 3rd level 20 24 24 24
Edit Density 4th level 18 24 24 24
Intended for use as reference for Trip2 performance, track counts may vary according to plug-ins used and limitations of your DAW.
Loading...