Glyph EC2 - 2 Port eSATA Card User Manual

EC2 - 2 Port eSATA Card Quickstart
Two Port PCI Express eSATA Adapter
610029-1.5 EC2 - 2 Port eSATA Quickstart.pdf June 9, 2011
Proprietary Notice and Disclaimer
Unless noted otherwise, this document and the information herein disclosed are proprietary to Glyph Technologies, 3736 Kellogg Road, Cortland NY 13045 (“GLYPH”). Any person or entity to whom this document is furnished or having possession thereof, by acceptance, assumes custody thereof and agrees that the document is given in condence and will not be copied or reproduced in whole or in part, nor used or revealed to any person in any manner except to meet the purposes for which it was delivered. Additional rights and obligations regarding this document and its contents may be dened by a separate written agreement with GLYPH, and if so, such separate written agreement shall be controlling.
The information in this document is subject to change without notice, and should not be construed as a commitment by GLYPH. Although GLYPH will make every eort to inform users of substantive errors, GLYPH disclaims all liability for any loss or damage resulting from the use of this manual or any software described herein, including without limitation contingent, special, or inci­dental liability.
© 2002-2008 Glyph Technologies. All rights reserved. Specications are subject to change without notice. Glyph and the Glyph logo are registered trademarks of Glyph Technologies. All other brands and product names mentioned are trademarks of their respective holders.
1
Contacting Glyph
Please use the following contact information to contact Glyph and its distributors. Glyph USA oers phone support Monday through Friday, 8:00 am to 5:00 PM Eastern Time.
Note: DO NOT ship any return goods to the mailing addresses below unless you have a valid RMA number. All goods will be refused delivery unless a valid RMA number is displayed on the outside of the package.
United States of America
Glyph Technologies 3736 Kellogg Rd. Cortland, NY 13045 USA Phone: +1 607-275-0345 Fax: +1 607-275-9464 www.glyphtech.com
Sales Contact sales@glyphtech.com
Technical Support: tech@glyphtech.com
Unpacking Your EC2 Host Adapter
Your Glyph EC2 Host Adapter and accessories are packaged in a sturdy shipping container. Please inspect the container for evidence of shipping damage and mishandling. If the container is damaged, le a report with the carrier or dealer immediately.
The EC2 Host Adapter package includes:
EC2 Host Adapter PCI card 1-meter eSATA Cable
NOTE: Drivers are downloadable from the Glyph website at: www.glyphtech.com/support/accessories.php
About the EC2 Host Adapter
The EC2 card has two eSATA ports. Ocially, these are 3Gbps SATA II ports, and can sustain 125MB/s on each port. The EC2 uses a PCIe slot in your computer. When using eSATA, copy speeds will increase signicantly when moving large amounts of data from one drive to another. Typically, a GT 050Q can reach around 70MB per second when using FireWire 800. When connected to our EC2 card, speeds of over 110MB/s are easily attainable using the same drive. Higher bandwidth is quite handy when you need to backup or move the entire contents of a large hard drive.
2
Loading...
+ 3 hidden pages