GLX GT-35-B, GT-80-B Owner's Manual

GT-35-B BASS AMP

OWNER’S MANUAL

OVERVIEW

• 10” bass speaker

• RMS 35W / 4 Ohm

• 3-band EQ (low, mid, high)

• Aux input

• Line output

• Headphones output

• Built-in limiter

• Bright / boost switch

CAUTION

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. Do not remove cover. For service, refer to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
servicing instructions.

The lightning flash symbol within an equilateral triangles is intended to alert you to the presence of danger.

• Voltage: AC240V~50Hz

ATTENTION

• To avoid damage to the amplifier or other equipment, please turn down the level of all equipment and switch it off before
connection. Turn the equipment on after connection and turn the level up gradually.

• The amplifier is equipped with a protective circuit, which will startup a few seconds after the amplifier is switched on.

FRONT PANEL

1. INPUT

(1/4”) Use this jack to connect an electric bass guitar.

2. GAIN

Use this control to adjust the gain level.

3. BRIGHT

Use this control to boost the high frequency of your sound.

4. BOOST

Use this control to boost the low frequency of your sound.

12 Bass speaker
RMS 80W/4 Ohm
4 Band EQ(LOW LOW MID MID HIGH HIGH)
Chorus
Aux Input
Line Output
Headphones Output
Built-in Limit
Bright/Boost Switch

BASS AMPLIFIER

BP80

Overview

C A U T I O N

RI SK OF E LEC TRI C SHO CK DO N OT OP EN

Cautio n

To reduce th e risk of fire or el ectric s hock. Do not expos e this a ppara tu s to
rain o r m oistu re. T o reduce the ri sk of elec tric sho ck. D o not remo ve cover

.

Refer se rvici ng to qual ified se rvice personn el for rep air this appar atus.

12 Bass speaker
RMS 80W/4 Ohm
4 Band EQ(LOW LOW MID MID HIGH HIGH)
Chorus
Aux Input
Line Output
Headphones Output
Built-in Limit
Bright/Boost Switch

BASS AMPLIFIER

BP80

Overview

C A U T I O N

RI SK OF E LEC TRI C SHO CK DO N OT OP EN

Cautio n

To reduce th e risk of fire or el ectric s hock. Do not expos e this a ppara tu s to
rain o r m oistu re. T o reduce the ri sk of elec tric sho ck. D o not remo ve cover

.

Refer se rvici ng to qual ified se rvice personn el for rep air this appar atus.

The ex cl amati on point within a n equ il atera l tria ng le is i ntend ed to ale rt you to t he prese nce of im porta nt
opera ti ng and se rvici ng instr uctio ns.

12 Bass speaker
RMS 80W/4 Ohm
4 Band EQ(LOW LOW MID MID HIGH HIGH)
Chorus
Aux Input
Line Output
Headphones Output
Built-in Limit
Bright/Boost Switch

BASS AMPLIFIER

BP80

Overview

C A U T I O N

RI SK OF E LEC TRI C SHO CK DO N OT OP EN

Cautio n

To reduce th e risk of fire or el ectric s hock. Do not expos e this a ppara tu s to
rain o r m oistu re. T o reduce the ri sk of elec tric sho ck. D o not remo ve cover

.

Refer se rvici ng to qual ified se rvice personn el for rep air this appar atus.

The ex cl amati on point within a n equ il atera l tria ng le is i ntend ed to ale rt you to t he prese nce of im porta nt
opera ti ng and se rvici ng instr uctio ns.

The li gh ting f lash & ar rowhe ad sym bo l, wit hin an equ il atera l tria ng le, is i nt ended to alert you t o the presence of
dange r.

5. LOW, MID, HIGH

Use these controls to boost or cut the low, mid and high frequency levels by ±12dB.

6. LIMIT LED

The built-in limiter limits harsh, transient peaks and evens out the bass guitar signal. The LED indicates when the limiter
circuit is activated.

7. MASTER

Use this control to adjust the output level of the amplifier.

8. AUX IN (RCA)

Use this input to connect a CD-player, drum machine, etc.

9. LINE OUT (1/4”)

Use this jack to connect line output.

10. HEADPHONE OUTPUT (1/4”)

Use this jack to connect headphones.

11. POWER LED

This LED indicates when the amplifer is turned on.

12. POWER SWITCH

Use this switch to turn the amplifier on/off.

REAR PANEL

13. SOCKET

SPECIFICATIONS

Input sensitive / impedance: -20dBu / 1MΩ (@1KHz)
Output (RMS): 35W / 4Ohm
Speaker: 1x10”
Connections: input (1/4”)

aux in (RCA)
headphones (1/4”)
line out (1/4”)

EQ: 3-band EQ: low, mid, high
±12dB

Power Supply: 240V~50Hz
Net weight: 14.5kg
Dimensions: 416x320x452mm

*** appearance and specifications are subject to change without notice – E&OE ***