Glunz & Jensen Concept 205 C Preinstallation Manual
Pre-installation Manual
CONCEPT 205 C
Pre-installation Manual
CONCEPT 205 C
Edition AC, June 2014
This book has part No 10073807
T11376
This manual is published by: Glunz & Jensen Degraf S.p.A.
’Il Girasole’ - Palazzo Donatello 8/03b
20084 Lacchiarella (MI)
Italy
Internet: www.degraf.glunz-jensen.com
Copyright © 2014 by Glunz & Jensen Degraf S.p.A.
Pre-installation Manual - CONCEPT 205 C 1425
0-2
Part 0: Introduction
Reservations
•
This manual was written and illustrated using the best possible information avail
-
able at the time of publication.
•
Any differences between this manual and the equipment reflect improvements intro
-
duced after the publication of the manual.
•
Changes, technical inaccuracies and typographic errors will be corrected in subse
-
quent editions.
•
As a part of our policy of continuous improvement, we reserve the right to alter de
-
sign and specifications without further notice.
Pre-installation instructions
The instructions in this Pre-installation Manual allow the customer and the Service
Technician to prepare the installation site for the unit and for the installation itself.
•
Never install the unit in explosive environments.
•
It is the responsibility of the owner and operator/s of the unit that the installation is
made in accordance with local regulations, and by engineers authorized to carry out
plumbing and electrical installations.
•
The manufacturer cannot be held responsible for any damage caused by incorrect installation of the unit.
"
Only qualified Service Technicians are allowed to unpack and install the
equipment.
#
When preparing the installation site please take into consideration that this
equipment is for restricted access locations only!
Notes, cautions, and warnings !
Throughout the manual warnings, cautions, and notes are written in bold like the ex
-
ample below:
#
Electrical installation must conform to local regulations and guidelines.
Symbol Meaning Explanation
"
Note
The operator should observe and/or act according to the
information in order to obtain the best possible function of the
equipment.
$
Caution
The operator must observe and/or act according to the
information in order to avoid any mechanical or electrical
damage to the equipment.
#
Warning
The operator must observe and/or act according to the
information in order to avoid any personal injury.
1407 Pre-installation Manual - CONCEPT 205 C
0-3
Introduction
Table of contents
Pre-installation Manual - CONCEPT 205 C 1407
0-4
Introduction
Table of contents
Part 0: Introduction .................................... 0-3
Reservations ..................................................0-3
Pre-installation instructions ........................................0-3
Notes, cautions, and warnings ! .....................................0-3
Table of contents .................................................0-4
Part 1: Transportation .................................. 1-1
When the unit arrives ..............................................1-1
Storing the unit before installation ...................................1-1
The crate.......................................................1-1
Dimensions and weight...........................................1-1
Checking the crate for damage......................................1-2
Handling the crate ..............................................1-2
Transporting the unit...............................................1-3
Lifting the crate ................................................1-3
Available width for transport .......................................1-3
Part 2: Installation requirements ........................... 2-1
Environmental requirements .........................................2-1
Accessories to be provided by customer for connections ......................2-1
Installation kit ...................................................2-1
Space requirements ...............................................2-2
Free space around the unit ........................................2-2
Unit dimensions and connection locations..............................2-3
Electrical requirements .............................................2-5
Main power connection...........................................2-5
Main power outlet ..............................................2-5
Power supply cable .............................................2-5
Electrical specifications ...........................................2-6
Fuses .......................................................2-6
Power consumption .............................................2-6
Part 3: Pre-installation checklist ...........................3-1
Loading...