GlucoRx Vet TD-4268 User Manual
雙罐試片說明書/GlucoRx Vet/英文
L250*W288mm/3折/雜誌紙65P/單Pantone647C
312-4239301-XXX
JF
PANTONE 647C
Color
Designer
Part no.
Product name
Spec
Use Only With GlucoRx Vet TD-4268 Blood Glucose Monitoring System
to test for blood glucose in cats and dogs (not humans)
Warnings
■
For single use only.
■
Do not use the system to test an animal’s blood until a control solution test result is obtained that is within
the recommended range. The recommended control solution range is on the test strip vial for dogs and
cats.
■
Please read this sheet and the GlucoRx Vet TD-4268's Owner’s Manual before you use these test strips. Use
only GlucoRx Vet TD-4268 Test Strips with the GlucoRx Vet TD-4268 Blood Glucose Monitoring System to
obtain accurate results, and be covered by the manufacturer’s warranty.
■
Severe dehydration and excessive water loss may cause false low results. If severe dehydration is suspected
in your pet, consult a veterinarian/veterinary surgeon immediately.
■
Keep test strips and lancets away from small children. If swallowed, consult a doctor.
Please follow a veterinarian/veterinary surgeon’s direction on frequency and time of day for testing.
Veterinary medical device: for use under the direction of a veterinary professional.
Limitations
■
Haematocrit: The haematocrit level is limited to between 0% and 70%.
■
This test strip is used for testing fresh capillary, venous blood.
■
Altitude Eects: Altitudes up to 10,742 feet (3,275m) do not aect test results.
■
Use only heparin for anticoagulation of whole blood.
ver 1.0 2015/11
Intended Use
GlucoRx Vet TD-4268 test strips, when used together with the GlucoRx Vet TD-4268 blood glucose
monitoring system, allow cat and dogs' blood glucose levels to be measured by their owner at home and by
veterinarian professionals in clinical settings as an aid to monitoring the eectiveness of diabetes control in
the animal. It is intended to be used for the quantitative measurement of glucose (sugar) in fresh whole blood
samples. It should not be used for the diagnosis or screening of diabetes mellitus.
Professionals may test with capillary and venous blood sample from the pet's paw pad and marginal ear;
home use is limited to capillary whole blood testing.
Storage and Handling
IMPORTANT: Do not use the test strips if they have expired.
■
Test strips expire 6 months after rst opening. Write the date on the test strip vial when you rst opened it.
■
Store the test strips in a cool, dry place between 2°C and 30°C (35.6°F and 86°F) and below 85% relative
humidity.
■
Keep the test strips away from direct sunlight. Do not store the test strips in high humidity.
■
Store the test strips in their original vial ONLY. Do not transfer them to a new vial or any other
containers.
■
Do not touch the test strips with wet hands.
■
Use each test strip immediately after taking it out of the vial. Close the vial immediately after taking out a
strip.
■
Keep the vial closed at all times.
■
Do not bend, cut, or alter the test strip.
Strip Appearance
1. Absorbent Hole
Apply a drop of blood here. The blood will be automatically absorbed.
2. Conrmation Window
This is where you conrm if enough blood has been drawn into the
absorbent hole of the strip.
3. Test Strip Handle
Hold this part to insert the test strip into the slot
4. Contact Bars
Insert this end of the test strip into the meter. Push it in rmly until it will go
no further.
Chemical Components
> Glucose dehydrogenase (E. coli)
> Electron shuttle
> Enzyme protector
> Non-reactive ingredients
8%
55%
8%
29%
The used lancet and test strip are potentially biohazardous. Please dispose of them carefully according to
your local regulations.
Quality Control Testing
Our control solution contains a known amount of glucose that can react with test strips. You can check the
performance of the meter, test strip and your technique by comparing the control solution results with the
range printed on the label of your test strip vial. Checking regularly can ensure the test results are accurate.
Please refer to your Owner's Manual for complete testing instructions.
IMPORTANT: The reference range of the control solution may vary with each new vial of test strips. Make sure
you check the range on the label of your current vial. If the LCD displayed code is not the same as the code on
the test strip vial or package, and the code number cannot be updated, please contact GlucoRx Customer care
on 01483 755133 for assistance.
Reading Result
The blood glucose readings deliver plasma equivalent results and are displayed in millimoles of glucose per
liter of blood (mmol/L). The measurement range of this meter is 0.5-33.3 mmol/L.
Please consult a veterinarian/veterinary surgeon for the target glucose values for each animal.
If the test results are unusual or inconsistent:
■
Make sure the conrmation window of the test strip is completely lled with blood.
■
Check the expiration date of the test strips.
■
Check the performance of your meter and test strip with the control solutions.
■
Make sure your meter has correct coding, and the code is the same as the code on the vial of the test strip
you are using.
PLEASE NOTE: Low or high blood glucose readings can indicate a potentially serious medical condition. If the
blood glucose reading is unusually low or high, repeat the test with a new test strip. If the reading is not
consistent with any visible symptoms, contact a veterinarian/veterinary surgeon and follow his or her
treatment advice.
Questionable or inconsistent results
1
2
3
4
Additional Information for Veterinary Professionals
Veterinary professionals may use test strips to test capillary and venous whole blood. Use fresh whole blood
samples only.
Sample Size: 1.0 μL
Reaction Time: 5 seconds
System Measurement Range: 0.5-33.3 mmol/L
Haematocrit Range: 0% to 70%
symbol information
Test results may be wrong if the contact bar is not fully inserted into the
test slot.
The front side of the test strip should face up when inserting the test strip.
ATTENTION
Front
TD-4268
Blood Glucose Test Strips
Temperature limitation
Use by
Batch code
Manufacturer
Do not reuse
Humidity limitation
Symbol Referent
Consult instructions for use
TaiDoc Technology Corporation
B1-7F., No. 127, Wugong 2nd Rd., Wugu Dist.,
New Taipei City 248, Taiwan (R.O.C.)
www.taidoc.com
Distributed by GlucoRx Ltd.
4 Wintonlea, Monument Way West, Woking, Surrey, GU21 5EN, UK
Website: www.glucorx.co.uk
Customer careline: 01483 755133
°
C2
°
C30
STEP 1
Insert the test strip fully into the slot of the meter until it will go no further.
When the strip is fully inserted, the meter will do several self-checks.
Please make sure you have calibrated your meter with the appropriate code
strip according to the instructions in the Owner’s Manual before testing.
STEP 2
Collect a blood sample of about 1.0 µL with the test strip. A sucient quantity
of blood is required for the test to provide accurate results. Touch the blood
drop with the absorbent hole of the test strip and wait until the conrmation
window is fully covered. Do NOT apply a smeared blood sample. The meter
will start counting down.
STEP 3
After a few seconds, the meter will display your pet's blood glucose level. The
last reading will be automatically saved in the meter. Turn it o by removing
the test strip.
PLEASE WASH AND DRY YOUR HANDS BEFORE PERFORMING ANY TESTING.
Make sure you use the code strip and calibrate your meter before using for the rst time or changing a new
vial of test strip. Please refer to your Owner’s Manual for more information.
Testing Your Pet's Blood Glucose
312-4239301-XXX
85%
Loading...