GlucoRx TD-4280 Quick Start User Manual

Quick Start User Guide

2

4

6 7

1

3

5

315-4280100-007

For self-testing.

BLOOD GLUCOSE
MONITORING SYSTEM

TD-4280

Voice

Hand wash the puncture site with warm water
and dry thoroughly before testing.

Twist and pull the cap off of the lancing device.

Insert a lancet and twist the protective disk off it.

Select the depth of penetration. Pull the cocking control back until it clicks.

Replace the cap of the
lancing device.

Twist the cap to close it until you hear a click.

TaiDoc Technology Corporation

B1-7F., No. 127, Wugong 2nd Rd., Wugu Dist.,
New Taipei City 248, Taiwan (R.O.C.)
www.taidoc.com

Distributed by

GlucoRx Ltd.

4 Wintonlea, Monument Way West
Woking, Surrey, GU21 5EN, UK
Website: www.glucorx.co.uk
Call centre number: 01483 755133

MedNet GmbH

Borkstraβe 10, 48163 Mϋnster, Germany

14 15

9

11108

A flashing " " will display on the
meter screen.

Take a test strip out and then insert it to turn on the meter.

After the meter counts to 0, your test result will display on the screen. Dispose the used strip carefully.

Twist the cap of the lancing device to
the left to open it.

Dispose the used lancet carefully.

Apply your blood sample until the confirmation window is
completely filled.

Press the release button on the lancing device
to obtain a drop of blood. Discard the first drop
and gently squeeze the punctured area to
obtain another drop of blood for testing.

Never share a lancet of the lancing
device. GlucoRx Lancing device is
for self-use only.

12

13

5”