Gluco Rx GO TD-4283 Quick Start User Manual
L148*W420mm/3折/銅版紙100P/單色
簡易使用指南/Nexus go/英
Sam
K100
315-4283300-xxx
Color
Designer
Part no.
Product name
Spec
Quick Start User Guide
TD-4283
BLOOD GLUCOSE
MONITORING SYSTEM
2
4
7
1514
1211
8 9
5
1
3
6
10
13
TaiDoc Technology Corporation
B1-7F., No. 127, Wugong 2nd Rd.,
Wugu Dist., New Taipei City 248, Taiwan (R.O.C.)
MedNet GmbH
Borkstraβe 10, 48163 Mϋnster, Germany
315-4283300-002
For self-testing.
5”
Distributed by GlucoRx Ltd.
4 Wintonlea, Monument Way West, Woking,
Surrey, GU21 5EN, UK
Website: www.glucorx.co.uk
Customer careline: 01483 755133
Hand wash the puncture site with warm water
and dry throughly before testing.
Insert a lancet and twist the protective disk off it.
Select the depth of penetration
Press the release button on the lancing device to
obtain a drop of blood. Discard the first drop and
gently squeeze the punctured area to obtain another
drop of blood for testing.
Apply your blood sample until the confirmation window is completely filled.
Twist the lancing device cap to the left to open it. Dispose the used lancet carefully.
After the meter counts down to 0, your test result will display on screen.
Dispose the used strip carefully.
Never share a lancet of the lancing device. GlucoRx
Lancing device is for self-use only.
Pull the cocking control back until it clicks.
Take a test strip out and insert it into
the meter to turn it on.
Pull it back.
Twist and pull off the lancing device cap.
Twist the cap to close it until you hear the click.
A flashing "Blood drop
symbol" will display on
the meter.
mmol/L
mmol/L
Loading...