GLP Volks Licht R-G-B Instruction Manual
from software version 1.15
(Instruction version 1.7)
e-mail: service@glp.de
Internet:
http://www.glp.de
R
-
G
-
B
R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP German Light Products GmbH
(Instruction version 1.7) / from software version 1..15)
2
Notes:
R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP German Light Products GmbH
(Instruction version 1.7) / from software version 1..15)
3
Table of content
1 Description of Device.............................................................................................. 4
1.1 Safety Instructions ............................................................................................ 5
2 Preparation and Installation ................................................................................... 6
2.1 Mounting ........................................................................................................... 6
2.1.1 Mounting on the floor (upright) ............................................................. 7
2.1.2 Mounting in hanging position (Head down) .......................................... 7
2.1.3 Mounting in a sideway Position............................................................ 7
2.2 Securing the Device .......................................................................................... 8
2.3 Connections ...................................................................................................... 8
2.3.1 Power Supply....................................................................................... 8
2.3.2 DMX ..................................................................................................... 8
3 The Menu Field ........................................................................................................ 9
4 DMX Channel Selection (DMX Protocol) ............................................................. 11
5
5 Maintaining and Cleaning the VVOOLLKKSSLLIICCHHTT ....................................................... 13
5.1 Safety regulations ........................................................................................... 13
5.2 Circumference and Interval (rule-of-thumb) .................................................... 13
6 Technical Specifications ...................................................................................... 14
7 System dimensions (in mm) ................................................................................. 15
8 Index ....................................................................................................................... 16
R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP German Light Products GmbH
(Instruction version 1.7) / from software version 1..15)
4
1 Description of Device
1. Moving head (actively and
passively cooled)
2. Arm with various cooling vents
3. LCD-Display/Menu (data entry)
4. Base with various connectors and
Camlock mounting system
5. Carrying handle. It is also used to
attach the safety cable
6
7
8
9
6. Micro-fuse 5x20mm, T2A
7. DMX- Input (3 pole)
8. DMX- Output (3 pole)
9. Power On-/Off
R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP German Light Products GmbH
(Instruction version 1.7) / from software version 1..15)
5
1.1 Safety Instructions
The VVOOLLKKSSLLIICCHHTT is an advanced technology product. To
guarantee smooth operation, it is necessary to follow the
following instructions.
The manufacturer of this device will not take responsibility of
damages through any disregard of the information in this user
manual. Warranty claims will also be cancelled in the event of
the system casing being opened.
If the external cable of this lighting is damaged, it should be
replaced by the manufacturer or its service agent or a qualified
person, to avoid danger.
1. Make sure that before powering up the fixture, the fans and air inlets are
clean and not blocked by anything.
2. Before powering up the fixture, ensure that the moving head part of the
fixture can rotate unhindered through its full range of movement.
3. A safety distance of at least 0.5 m to any easily flammable material (e.g.
decoration material) must be adhered to.
4. Attention! Don’t touch the device during operation. Parts of the fixture can
become hot and can cause injuries and / or damages.
5. The system doesn’t contain any user serviceable parts. Opening the fixture
will void the manufacturers warranty.
6. Danger of burning. Wait at least 15 minutes after disconnecting the AC
power before changing the optical carrier on the fixture. Pay attention to
possible hot parts of the system.
7. Never look directly into the beam of light or one of the LEDs. Never use
optical apertures with a distance less than 0.5 m to observe the beam of
light. LED Class 2M. Not following these precautions can result in serious
injury to your eyes and in particular, your retina.
8.
Attention: LED Class 2M can cause inju
ries of your eyes even
without optical instruments in front of them or within a distance
of less than 0.5m and short exposure time.
Avoid direct radiation to your eyes!
R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP German Light Products GmbH
(Instruction version 1.7) / from software version 1..15)
6
9. To ensure proper operation, you must also follow the installation guide
described in chapter 2 of this manual. Operating the VVOOLLKKSSLLIICCHHTT without
suitable mounting devices can increase the risk of an accident.
10. The VVOOLLKKSSLLIICCHHTT features a unique small and lightweight design with no
specific carrying handles. Care needs to be shown when handling the
fixture to ensure that no unnecessary damage should occur. Fragile areas
include the LCD display and cover on one side arm and the front bezel.
Pressure in these areas could result in damages which will not be covered
by the standard warranty.
11. Repair-, maintenance- and installation work should only be performed by
qualified or GLP certified staff. You need to pay attention to the common
rules of technology that are not explicit mentioned in this manual.
12. Use only original spare parts. Any structural modification on the system will
terminate all warranty claims.
13. Please keep this instruction manual for future reference.
2 Preparation and Installation
2.1 Mounting
The VVOOLLKKSSLLIICCHHTT is fully operational whether it hangs or is mounted to a wall.
It can also be operated while standing on the floor. Keep a safety distance of
0.5 m from any easily inflammable materials (decoration etc.).
Loading...