Page 1
from software version: v0.26
support@glp.de
www.glp.de
Instruction Manual
10
Page 2
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 2
Contents
1 Description of Device ..................................................................................................... 3
1.1 Safety Instructions ................................................................................................... 4
2 Preparation and Installation ............................................................................................ 5
2.1 Safety Information ................................................................................................... 5
2.2 Mounting ................................................................................................................. 6
2.2.1 Operating on the Floor (Upright) ....................................................................... 7
2.2.2 Mounting in hanging or sideways position ........................................................ 7
2.3 Securing the Fixture ................................................................................................ 7
2.4 Alignment of the Fixtures ......................................................................................... 7
2.5 Connections ............................................................................................................ 8
2.5.1 Power Supply ................................................................................................... 8
2.5.2 DMX ................................................................................................................. 8
3 The Menu Field .............................................................................................................. 9
4 DMX Chanel Selection (DMX Protocol) .........................................................................10
4.1 Normal Mode (norm) 33 DMX channels: ................................................................10
4.2 Compressed Mode (comp) 20 DMX Channels: ......................................................12
4.3 Single Pixel Mode (spix) 48 DMX Channels: ..........................................................14
5 Accessories ...................................................................................................................16
5.1 Optional diffuser filter: ............................................................................................16
6 Maintaining and Cleaning ..............................................................................................17
6.1 Safety regulations ..................................................................................................17
6.2 Maintenance and Interval (rule-of-thumb) ...............................................................17
7 Technical Specifications: ...............................................................................................18
8 Dimensions ...................................................................................................................19
Page 3
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 3
1 Description of Device
1. Moving Bar (actively and passively cooled)
2. LCD-Display / Menu (data entry)
3. Base with rubber feet and Camlock mounting system
A) Base side left
B) Base side right
4. DMX Input (5 pin)
5. Mains Input (blue powerCON)
6. Micro-fuse 5x20mm, T5A
7. Mains Output (white powerCON)
8. DMX Output (5 pin)
1
2
3
4 5 6 7 8
A
B
Page 4
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 4
1.1 Safety Instructions
The IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 is a High-Tech Product. To guarantee
a smooth operation, it is necessary to respect the following rules.
The manufacturer of this device will not take responsibility for
damages through any disregard of the information provided in this
manual. Warranty claims also will be voided in the case that the
fixture housing is opened.
1. Before powering on the fixture, make sure that the fixtures fans and air
inlets are clean and not blocked.
2. Ensure that the fixture head can rotate unhindered throughout its complete
range of pan and tilt movement. A safety distance of at least 0.5 m must be
maintained between the fixture and any easily inflammable material (e.g.
decoration material).
3. Attention! Don’t touch the fixture during the operation. This can cause
injuries and/or damages.
4. The fixture doesn’t contain any user serviceable parts. Opening the
fixture will void all warranties.
5. It is necessary to wait at least 15 minutes after disconnecting the mains
power before handling the fixture.. Pay attention to possible hot parts of the
fixture. -- Danger of BURNING --
6. Never look directly into the beam of light or into one of the LEDs.
Never use optical apertures to observe the beam of light. LED Class 2M.
You'll risk serious injury of your eyes and in particular of your retina.
Attention: LED Class 2M can cause injuries of your eyes even
without optical instruments in front of them or within a distance
of less than 0.5m and short exposure time.
Hence: Avoid direct radiation into your eyes!
7. To ensure safe operation, follow also the Installation guide described in the
chapter below. Operating the IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 without suitable
safety aids like Safety cables or clamps/hooks can increase the risk of an
accident and must be avoided.
8. Repair, maintenance, and installation work shall be done by qualified or
GLP certified staff only. You need to pay attention to the common rules of
technology that are not explicitly mentioned in this manual.
9. Use only original GLP spare parts. Any structural modification of the
system will terminate all warranty claims.
10. Please keep this instruction manual for future reference.
Page 5
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 5
2 Preparation and Installation
2.1 Safety Information
The IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 fixture from GLP is fitted with a number of planoconvex lenses in a highly efficient collimator cluster. This type of lens can act as
a strong magnifying glass.
If the rays from a strong light source (such as the sun or another lighting fixture)
are directed towards the front of any of these fixtures, then internal damage
may occur. In a worst case scenario with a high power light source this can
happen very quickly, damaging the fixture internally, potentially melting
components or causing an internal fire within seconds.
In order to avoid these possible problems please adhere to the following
requirements:
Do not expose the front of a fixture to direct sunlight or any other strong
light sources.
For outdoor applications during daylight make sure that the front face of
any fixture is either shielded or points away from the sun, even when
fixtures are not in use.
Do not modify the front glass or lenses of any fixture.
These requirements have to be followed regardless of whether a fixture is
powered on or off as the magnifying effect is an optical effect and therefore
independent from the (electrical) state of the fixture.
Especially when working with high powered bbeeaamm--lliigghhttss; extreme caution and
observance of these safety instructions is mandatory.
Page 6
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 6
Should you have any questions about the operation of your fixture then please
contact your local GLP office, or their authorized distributor, a list of which can
be found at http://www.glp.de.
2.2 Mounting
The IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 is fully operational whether it hangs or is mounted
to the wall. It can also be operated while standing on the floor. Keep a safety
distance of min. 0.5 m towards any easily inflammable materials (decoration etc.).
Pay attention to the regulations of: BGV C1 (former VBG 70)
and DIN VDE 0711-217.
The installation shall be done by qualified staff only.
For the various mounting positions of the IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 (standing on
the floor, sideways or hanging) different accessories kits are available. Through
this a safe and firm installation is assured. You'll find dedicated connectors on
the bottom side of the fixture which should be used.
Page 7
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 7
2.2.1 Operating on the Floor (Upright)
The IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 is fitted with 4x solid rubber feet which allows a
stable standing of the fixture. An additional securing is usually not required.
Please pay attention to an even and gripping surface.
2.2.2 Mounting in hanging or sideways position
To operate the IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 in a hanging position please use the
dedicated bracket supplied with your fixture. It is fixed to the base of the fixture
with fasteners called Camlock quick-release connectors. Insert the four fasteners
and turn each 90° to lock them. Do the opposite to release them again.
2.3 Securing the Fixture
Regardless of the mounting method of the IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 you'll have to
use a stipulated safety wire. Attach the safety wire through the bracket on the
base of the fixture and connect it to the primary support structure. Pay attention to
a safe and proper fastening. The safety cable must comply with BGI 810-3 (EN
60598-2-17 Section 17.6.6) and be capable of bearing a static suspended load
that is ten times the weight of the fixture and all installed accessories.
2.4 Alignment of the Fixtures
For precise and easy alignment of multiple fixtures the IIMMPPRREESSSSIIOONN XX44 BBaarr 1100
is equipped with alignment pins on the side.
To deploy them, simply loosen the screw shown below, push it to the side and
fix the screw again.
Insert the pins in the related holes of the next fixture.
Do the opposite to slide in the pins again after every usage to avoid any
damage or injuries that could be caused by them.
4 x Camlock for bracket
Page 8
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 8
2.5 Connections
2.5.1 Power Supply
~100-240 Volt AC, 50-60 Hz, powerCON AC connector
Connected load 200 VA (W) <=> T5A (micro-fuse 5x20mm)
Please see printing on the case for the right electronic supply!
Disconnect from the mains supply for changing the fuse and use
only the above described micro-fuse type.
NEUTRIK® powerCON
The IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 is fitted with NEUTRIK® powerCON locking 3
conductor AC connectors. Up to max. 18 fixtures can be linked via the power
outlets staying within the power limits of the 20A of the connectors.
Note: Regional regulations
and limits might be lower
and differ from that.
2.5.2 DMX
USITT DMX-512 Standard input/output in 5-pin connectors.
Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4&5 N.C.
The DMX- Addressing starts at the DMX- Address [001].
Page 9
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 9
3 The Menu Field
To lock or unlock the keys of the menu field press Mode + Enter + Up simultaneously.
DOWN - UP
MODE - ENTER
Level1
Level 2
Level 3
Level 4
Remark
DMX Start
Address 001
Set the DMX start address
Special
Advanced settings
Set DMX
Mode
Select the desired DMX Mode
Compressed
Mode
Fixture works in "Compressed" mode see also
section 4 below
Normal
Mode
Fixture works in "Normal" mode see also
section 4 below
Single Pixel
Mode
Fixture works in "Single Pixel" mode see also
section 4 below
Position
feedback
Switch automatic position feedback ON/OFF
Reverse Tilt
Invert Tilt movements: ON/OFF
Reset
RESET and new calibration for all functions
You’ll find the control board on the side part of the arm. It allows you
to make all necessary adjustments of the
IIMMPPRREESSSSIIOONN XX44 BBaar
r.
With the Mode-key you get into the main menu. Afterwards you can
Navigate through the menu with the Up/Down-keys. Push the Enterkey to get in the next menu level or to confirm your settings. Make
them and set functions ON/OFF with the Up/Down-keys. Confirm
and save it with the Enter-key (the display shows OK). Push the
Mode-key to cancel the entry and go back to the main menu.
Page 10
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 10
4 DMX Chanel Selection (DMX Protocol)
4.1 Normal Mode (norm) 33 DMX channels:
Channel
Function
Time and Value
DMX
1
Tilt - High
Tilt coarse
0° - 210°
0..255
2
Tilt - Low
Tilt fine
0..255
3
Zoom
Wide (flood) - narrow (spot)
50° - 7°
0..255
4
CTO
No CTO
0..7
Continuous color temperature correction
Applicable
8..255
for ALL colors
5
Set 1 Color
(fixed)
Colors adjustable via RGB
0..7
Color 01 - Red 1)
8..15
Color 02 - Amber 1)
16..23
Color 03 - Warm Yellow 1)
24..31
Color 04 - Yellow 1)
32..39
Color 05 - Green 1)
40..47
Color 06 - Turquoise 1)
48..55
Color 07 - Cyan 1)
56..63
Color 08 - Blue 1)
64..71
Color 09 - Lavender 1)
72..79
Color 10 - Malve 1)
80..87
Color 11 - Magenta 1)
88..95
Color 12 - Pink 1)
96..103
White - CTO
3200K
104..111
White
5600K
112..119
White - CTB
7200K
120..127
Rainbow Effect Stop 2)
128
Rainbow Effect 3)
slow - fast
129..223
Random colors
slow - fast
224..255
6
Set 1 Red
Color mixing system - Red
0 - 100%
0..255
7
Set 1 Green
Color mixing system - Green
0 - 100%
0..255
8
Set 1 Blue
Color mixing system - Blue
0 - 100%
0..255
9
Set 1 White
Color mixing system - White
0 - 100%
0..255
10
Set 1 Intensity
Intensity
0 - 100%
0..255
11
Shutter
Shutter closed
0..15
Shutter pulse random
slow – fast
16..47
Fade on, snap off (random patterns)
slow – fast
48..79
Snap on, fade off (random patterns)
slow – fast
80..111
slow – fast
112..143
Page 11
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 11
Fade on, fade off (random patterns)
Strobe random
5s - 0.1s
144..199
Strobe effect slow - fast
1 Hz - 10 Hz
200..239
Shutter open
240..255
12
Intensity
Intensity
0 - 100%
0..255
13
Special
RESET
> 1 sec
250..255
14
Set 2 Color 4)
Values see Channel 5
-
-
15
Set 2 Red 4)
Color mixing system - Red
0 - 100%
0..255
16
Set 2 Green 4)
Color mixing system - Green
0 - 100%
0..255
17
Set 2 Blue 4)
Color mixing system - Blue
0 - 100%
0..255
18
Set 2 White 4)
Color mixing system - White
0 - 100%
0..255
19
Set 2 Intensity 4)
Intensity
0 - 100%
0..255
20
Set 3 Color 4)
Values see Channel 5
-
-
21
Set 3 Red 4)
Color mixing system - Red
0 - 100%
0..255
22
Set 3 Green 4)
Color mixing system - Green
0 - 100%
0..255
23
Set 3 Blue 4)
Color mixing system - Blue
0 - 100%
0..255
24
Set 3 White 4)
Color mixing system - White
0 - 100%
0..255
25
Set 3 Intensity 4)
Intensity
0 - 100%
0..255
26
Crossfade
0..2 seconds transistion time
0..255
27
Star Effect
0..255
28
Set 1 Pattern
0..255
Select
29
Set 1 Pattern
0..255
Movement
30
Set 2 Pattern
0..255
Select
31
Set 2 Pattern
0..255
Movement
32
Pixel Select
0..255
1 - 8
33
Pixel Select
0..255
9 - 10
Page 12
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 12
4.2 Compressed Mode (comp) 20 DMX Channels:
Channel
Function
Time and Value
DMX
1
None
reserved
-
2
None
reserved
- 3
Tilt - High
Tilt coarse
0° - 210°
0..255
4
Tilt - Low
Tilt fine
0..255
5
Set 1 Color
(fixed)
Colors adjustable via RGB
0..7
Color 01 - Red 1)
8..15
Color 02 - Amber 1)
16..23
Color 03 - Warm Yellow 1)
24..31
Color 04 - Yellow 1)
32..39
Color 05 - Green 1)
40..47
Color 06 - Turquoise 1)
48..55
Color 07 - Cyan 1)
56..63
Color 08 - Blue 1)
64..71
Color 09 - Lavender 1)
72..79
Color 10 - Malve 1)
80..87
Color 11 - Magenta 1)
88..95
Color 12 - Pink 1)
96..103
White - CTO
3200K
104..111
White
5600K
112..119
White - CTB
7200K
120..127
Rainbow Effect Stop 2)
128
Rainbow Effect 3)
slow - fast
129..223
Random colors
slow - fast
224..255
6
Set 1 Red
Color mixing system - Red
0 - 100%
0..255
7
Set 1 Green
Color mixing system - Green
0 - 100%
0..255
8
Set 1 Blue
Color mixing system - Blue
0 - 100%
0..255
9
Set 1 White
Color mixing system - White
0 - 100%
0..255
10
Shutter
Shutter closed
0..15
Shutter pulse random
slow – fast
16..47
Fade on, snap off (random patterns)
slow – fast
48..79
Snap on, fade off (random patterns)
slow – fast
80..111
Fade on, fade off (random patterns)
slow – fast
112..143
Strobe random
5s - 0.1s
144..199
Strobe effect slow - fast
1 Hz - 10 Hz
200..239
Shutter open
240..255
11 Intensity
Intensity
0 - 100%
0..255
Page 13
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 13
12
CTO
No CTO
0..7
Continuous color temperature correction
Applicable
8..255
for ALL colors
13
Special
RESET
> 1 sec
250..255
14
Crossfade
0..2 seconds transistion time
0..255
15
Set 1 Pattern
0..255
Movement
16
Zoom
Wide (flood) - narrow (spot)
50° - 7°
0..255
17
Set 1 Pattern
0..255
Select
18
Pixel Select
0..255
1 - 8
19
Pixel Select
0..255
9 - 10
20
None
reserved
-
Page 14
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 14
4.3 Single Pixel Mode (spix) 48 DMX Channels:
Channel
Function
Time and Value
DMX
1
Tilt - High
Tilt coarse
0° - 210°
0..255
2
Tilt - Low
Tilt fine
0..255
3
Shutter
Shutter closed
0..15
Shutter pulse random
slow – fast
16..47
Fade on, snap off (random patterns)
slow – fast
48..79
Snap on, fade off (random patterns)
slow – fast
80..111
Fade on, fade off (random patterns)
slow – fast
112..143
Strobe random
5s - 0.1s
144..199
Strobe effect slow - fast
1 Hz - 10 Hz
200..239
Shutter open
240..255
4
Intensity
Intensity
0 - 100%
0..255
5
CTO
No CTO
0..7
Continuous color temperature correction
Applicable
for ALL colors
8..255
6
Special
RESET
> 1 sec
250..255
7
Crossfade
0..2 seconds transistion time
0..255
8
Zoom
Wide (flood) - narrow (spot)
50° - 7°
0..255
9
Set 1 Red
Color mixing system - Red
0 - 100%
0..255
10
Set 1 Green
Color mixing system - Green
0 - 100%
0..255
11
Set 1 Blue
Color mixing system - Blue
0 - 100%
0..255
12
Set 1 White
Color mixing system - White
0 - 100%
0..255
13
Set 2 Red
Color mixing system - Red
0 - 100%
0..255
14
Set 2 Green
Color mixing system - Green
0 - 100%
0..255
15
Set 2 Blue
Color mixing system - Blue
0 - 100%
0..255
16
Set 2 White
Color mixing system - White
0 - 100%
0..255
17
Set 3 Red
Color mixing system - Red
0 - 100%
0..255
18
Set 3 Green
Color mixing system - Green
0 - 100%
0..255
19
Set 3 Blue
Color mixing system - Blue
0 - 100%
0..255
20
Set 3 White
Color mixing system - White
0 - 100%
0..255
21
Set 4 Red
Color mixing system - Red
0 - 100%
0..255
22
Set 4 Green
Color mixing system - Green
0 - 100%
0..255
23
Set 4 Blue
Color mixing system - Blue
0 - 100%
0..255
24
Set 4 White
Color mixing system - White
0 - 100%
0..255
25
Set 5 Red
Color mixing system - Red
0 - 100%
0..255
26
Set 5 Green
Color mixing system - Green
0 - 100%
0..255
27
Set 5 Blue
Color mixing system - Blue
0 - 100%
0..255
Page 15
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 15
28
Set 5 White
Color mixing system - White
0 - 100%
0..255
29
Set 6 Red
Color mixing system - Red
0 - 100%
0..255
30
Set 6 Green
Color mixing system - Green
0 - 100%
0..255
31
Set 6 Blue
Color mixing system - Blue
0 - 100%
0..255
32
Set 6 White
Color mixing system - White
0 - 100%
0..255
33
Set 7 Red
Color mixing system - Red
0 - 100%
0..255
34
Set 7 Green
Color mixing system - Green
0 - 100%
0..255
35
Set 7 Blue
Color mixing system - Blue
0 - 100%
0..255
36
Set 7 White
Color mixing system - White
0 - 100%
0..255
37
Set 8 Red
Color mixing system - Red
0 - 100%
0..255
38
Set 8 Green
Color mixing system - Green
0 - 100%
0..255
39
Set 8 Blue
Color mixing system - Blue
0 - 100%
0..255
40
Set 8 White
Color mixing system - White
0 - 100%
0..255
41
Set 9 Red
Color mixing system - Red
0 - 100%
0..255
42
Set 9 Green
Color mixing system - Green
0 - 100%
0..255
43
Set 9 Blue
Color mixing system - Blue
0 - 100%
0..255
44
Set 9 White
Color mixing system - White
0 - 100%
0..255
45
Set 10 Red
Color mixing system - Red
0 - 100%
0..255
46
Set 10 Green
Color mixing system - Green
0 - 100%
0..255
47
Set 10 Blue
Color mixing system - Blue
0 - 100%
0..255
48
Set 10 White
Color mixing system - White
0 - 100%
0..255
The Pixel are numbered left to right 1 – 10 as shown below.
Tilt DMX Value = 0 / “Display” to the front / “Power & DMX In” to the left.
1)
The predefined colors can be used as start-colors for the Rainbow effect. Please select first a
desired start-color before you activate the rainbow effect. All
IIMMPPRREESSSSIIOONN XX44 BBaarr 110
0 will then
start from that color and will execute the rainbow effect synchronously. Different
IIMMPPRREESSSSIIOONN
XX44 BBaarr 110
0 can have different start-colors but will still execute the rainbow effect synchronously.
If you choose a color different from the ones marked with 1) in the tables above the rainbow startcolor will be red.
2)
Rainbow-effect Stop will pause this function. After resuming the rainbow-effect will be continued
from the current color.
Display
Power /
DMX In
Power /
DMX Out
Page 16
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 16
3)
The Rainbow-effect will run synchronously only if started from one of the predefined colors (see
also 1) before).
4)
Set 1 is the main layer while Set 2 and Set 3 are background layers.
Thus Set 2 is only visible on the unlit pixel of layer 1 if a pattern is applied and Set 3 is only visible
on the unlit pixel of layer 1 and 2 if there are patterns applied.
5 Accessories
5.1 Optional diffuser filter:
The clear acrylic front cover is exchangeable with optional diffuser filters available
from your GLP dealer.
To remove the installed cover pull down the latch shown below and pull the filter out.
To insert the new filter pull the latch down again and slide in the new filter until fully
inserted, then release the latch to secure the new filter.
Page 17
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 17
6 Maintaining and Cleaning
The IIMMPPRREESSSSIIOONN XX44 BBaarr 1100 is a fixture of very low maintenance. It is only
necessary to clean the air inlets and outlets as well as the optical LED lenses from
time to time. For safe operation it is absolutely essential that the fixture is kept clean
and that dust, dirt and smoke-fluid residues must not build up on, or within the fixture.
Otherwise the fixture's light-output will be significantly reduced or damages can
occur. Regular cleaning will not only ensure the maximum light-output, but will also
allow the fixture to operate reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances should alcohol or solvents be used!
6.1 Safety regulations
Pull out the mains power plug!
Wait min. 15 minutes after disconnecting power to allow the fixture to cool
down.
6.2 Maintenance and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment details. Hence no
general guidelines can be given. The intervals given below are only suggestions
from our experience.
Position
Interval
In this way
LED reflector and optical system
weekly
soft brush /lint-free cloth
Fan and air channel
monthly
vacuum cleaner, airbrush, etc.
Attention:
Never let optical parts come into contact with oil or fat.
Before running the fixture wait until all parts are dry.
Never touch lenses with bare fingers.
Page 18
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 18
7 Technical Specifications:
Power supply
Power consumption
200 VA (Watt)
Power Input
Auto sensing 100-240 V AC, 50-60 Hz
Fuse protection
Micro-fuse 5x20 mm, T5A
Operational Parameters
Max. Ambient
Temperature
5° - 45°C (integrated overheating switch)
40°-113°F
Mounting Position
Any (see relevant chapter in the manual)
Lighting System - Additive Color mixing
LED Type
10 x Osram Ostar RGBW multi-chip
Lifetime
50,000 h
Wavelength optimized for maximum presentable color space
Optical System
Full RGBW / High efficient Collimator cluster
Exchangeable diffuser filters available (optional).
Shutter / Dimmer (8/16 Bit)
Strobe- Effect with variable speed between 1-10 flashes per second, Random- & Pulse-Effects
Continuous Dimmer 0 - 100%
Zoom
7 to 50 degree continuous high speed zoom
Optical Patterns
Several pre-defined beam patterns with direct access and manipulation.
Free control of every pixel, color and intensity
DMX Control
Standard USITT DMX-512, 5 pin XLR: [+]=Pin 3 / [-]=Pin 2 / [Ground]=Pin 1 / Pin 4&5 N.C.
The DMX- Addressing starts at the DMX channel [001].
Tilt (8/16 Bit)
Tilt- movement
210° in min. 1.5 seconds (Position Feedback)
Weights and Measures
Length
500 mm / 19.7´´
Width
100 mm / 3.9´´
Height
240 mm / 9.4´´
Weight (net)
8.0 kg / 17.6 lbs
Weight with bracket
9.8 kg / 21.6 lbs
Page 19
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 19
8 Dimensions
Page 20
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.1) from software version: v0.26 20
Loading...