Glory Star Technics JAR101 User Manual

Android Advertising
Displayer
JAR101

User Manual

Please read this instruction before

Importation Safety Instructions

Read this user manual
All safety and operating instructions in this user manual should be read befor e operating the
product

Keep this user manual
This user manual should be retained for future references.

Head Warnings
Be cautious about warning signals on the product.

Follow Instructions
Please follow instructions in this user manual

Attachments
To avoid danger, please do not use attachments not recommended by the product
manufacturer.

Mounting
Do not place the product on any unstable cart, stand, tripod or table to avoid injury on
children and adult. Please only use attachments indicated by product manufacturer.

Temperature
Please use this product within operating temperature 32°F ~ 100°F (0°C ~ 45°C), relative
humidity 20%-80%. The product should be situated away from any heat source such as
radiators, heat registers, stoves or other products (including amplifier) to product heat.

Avoid Liquid Invasion
Avoid the invasion of any liquid. Avoid placing it near bathtub, sink, kitchen, wet basement or
swimming pool. Do not place product on any uneven surfaces and keep a distance of at least 6
inches from wall. Do not place heavy objects on top of the unit and at sealed areas to avoid
heat ventilation problems.

Product Protection
Please do not place any attachment or parts inside the product to avoid contacts with voltage
points that could result an electric shock or fire.

Heat Ventilation
There is no heat ventilation on the upper and lower part of the product, therefore to avoid
overheating, please do not block any ventilation openings with objects (e.g. carpet). Please
allow the opening to have 10cm distance for ventilation.

Grounding or Polarization
This product could be equipped with an alternate plug.

Power –Cord Protection
Power supply cords should be routed so that they are unlikely to be walked on or pitched by
items placed upon them. Pay attention to the connection of plugs.

Power Sources
This product should be operated only from the type pf power source indicated on the rear
panel. If you are unsure of the type of power supply to your home, consult your product
purchaser or local power company.

Lighting and storms
Unplug the outlet during lighting, storms or long unused periods. This will prevent d amages
and power-line surges to the product.

Overloading
Do not overload wall outlets, extension cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.

Damage Handling
Unplug this product from the outlet of wall and request qualified service personnel under the
following conditions:

• when the power supply cord or plug is damaged

• when the picture display gets dimmer

• when liquid has been spilled or objects have fallen on to the product

• when the product has been exposed to rain or water.

• Adjust only those controls that are in the instruction manual. For improper adjustments may
result in damage and will often require extensive work by a qualified technician to restore
the product to its normal operation.

• When the product exhibits a distinct change in performance-this indicates a need for repair

service.

Replacement parts
When replacement parts are required, be sure that the technician uses replacement parts
specified by the manufacturer or parts with same features. Unauthorized substitution may
result in fire, electric shock or other hazards.

Safety Check
Upon completion of any service or repair to this product, ensure technician for proper
operating condition performs safety checks.

Warnings
If the battery of remote control is incorrectly replaced, there will be a danger of explosion.

Storage
Keep the product at dim areas, room temperature and low humidity to maintain original
condition. This will avoid danger.

Transportation
Since the product consists of glass and delicate electronic components, excessive shock or
drop will result damages. Please handle the product carefully to minimize shock during
transportation.

Recycling
The product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of
mercury. For environmental considerations, disposal of these materials may be regulated in
your community. For disposal or recycling information, please contact your local authorities,
or Electronics Industries Alliance: http://www.eiae.org/

Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use damp cloth for cleaning.

Spec. & Package

Package included:

-Please confirm all the items is included before the setup start.

Model JAR101

Sizes 10.1”

Resolution

(pixles)

1280x800

Brightness 300 cd/m2

Aspect Ratio 16:10

CPU ARM Cortex A7 at 1.3 Ghz Processor with ARM Mali-400MP2

GPUProcessor

RAM 1 GB DDR3

Operating

Android 5.1

System

Hardware Earphone, RJ45, Wi-Fi (802.11b/g), USB, micro-USB

Support

Speaker 1Wx2

Memory

Support

SD Card