![](/html/c6/c65c/c65ca8684e9eeb9de97cbcf09ebfd458cf4b5304e2f080f713ce4bbb280ae188/bg2.png)
info@glomex.us
Please read the following page before attempting installation to ensure complete understanding of the RA1225HP
VHF Antenna.
The RA1225HP antenna is a high performance 2,4m (8’) VHF antenna designed to transmit and receive on Marine VHF
channels. It is equipped with 6m (20’) RG-8X coax cable with a pre-wired FME connector and PL259
adaptor/connector for easy installation.
FEATURES
• Brass radiators for maximum transmit and receive performance
• White 2,4m (8’) marine VHF antenna with 6dB Gain
• 1"-14 stainless steel ferrule
• Equipped with 6m (20’) RG-8X coax cable with pre-wired FME connector
• Equipped with PL259 adaptor/connector
ACCESSORIES (NOT included)
RA107SSFME
INSTALLATION
For best performance:
• The antenna should be mounted as high as possible (VHF signal is line of sight so height matters).
• Please keep the VHF Antenna’s cable away from other cables.
• Please keep the antenna vertical for the best performance.
• Please keep the antenna away from large metal objects and other radiating devices like RADAR, TV and GPS and
other antennas (minimum distance: 1m / 3,3‘).
• Pay Attention: the miminum bend radius must be 6cm (2.4’’)
• To install the PL259 adaptor/connector on the RG-8X coax cable, fit the PL259 adaptor on the FME connector and
screw the nut counter clockwise (no soldering required).
SPECIFICATIONS
FREQUENCY RANGE 156MHz to 162MHz DC GROUND Yes
GAIN AVERAGE 6 dB MAX INPUT POWER 100 W
IMPEDANCE 50 ohms ANTENNA LENGHT 2,4m (8’)
POLARIZATION Vertical ANTENNA WEIGHT 750g (26,3 oz)
ELEMENTS Brass and copper TERMINATION
6m (20’) RG-8X coax cable +
PL259 adaptor/connector
SWR at 156.8MHz 1.3 FERRULE 1"x14
Performance specifications are nominal and unless otherwise indicated, are subject to change without notice.