GLOCKENKLANG Heart-Rock User Manual
Heart-Rock
head
User Manual
Contents
Introduction
How to use
1. Input stage with overdrive
function
2. Equalizer
3. Effects loop
4. Volume control
5. Power stage
6. Mains connection
7. Balanced DI output
8. Speaker output
9. Insert preamp/poweramp
10. Parallel insert loop (mixable)
11. Serial insert
12. Tuner out
13. Footswitches
Technical Data
Warranty
GLOCKENKLANG
Eimterstr. 147
D-32049 Herford
Tel +49-5221-51506
Fax +49-5221-108755
http://www.glockenklang.de
e-mail: info@glockenklang.de
Thank you for choosing the
GLOCKENKLANG Heart-Rock amplifier. You
have purchased an exquisite piece of
equipment, which was designed after the
most modern technical aspects.
Attention!
Attention!Attention!
Attention!
To activate your additional 3 years
warranty, you should send in the enclosed
warranty card.
Please enter the serial number of your
amplifier and the date of purchase and
send it to :
Glockenklang
Eimterstrasse 147
D-32049 Herford
Germany
or email to: info@glockenklang.de
This serves as a measure to ensure
excellent customer service in the
future.
For your safety
For your safetyFor your safety
For your safety
Please read the following instructions
carefully. These tips will ensure long and
trouble free operation of your new
GLOCKENKLANG product.
Operational restrictions
Operational restrictionsOperational restrictions
Operational restrictions
Do not operate the amplifier under the
following conditions:
• In direct sunlight
• In extremely dirty or dusty places
• In extremely humid or wet places
• Around heat emitting appliances
Caution: When rack mounting the
Caution: When rack mounting the Caution: When rack mounting the
Caution: When rack mounting the
amplifier, make sure to leave adequate
amplifier, make sure to leave adequate amplifier, make sure to leave adequate
amplifier, make sure to leave adequate
room for ventilation. The unit needs this
room for ventilation. The unit needs this room for ventilation. The unit needs this
room for ventilation. The unit needs this
ventilation space to adequately exhaust
ventilation space to adequately exhaust ventilation space to adequately exhaust
ventilation space to adequately exhaust
it´s internally generated heat.
it´s internally generated heat.it´s internally generated heat.
it´s internally generated heat.
Handling
HandlingHandling
Handling
Do not drop the amp. Do not use
excessive force when activating switches
and dials.
WARNING!
WARNING! WARNING!
WARNING!
DO NOT OPEN!
DO NOT OPEN!DO NOT OPEN!
DO NOT OPEN!
NO USER SERVICEABLE PARTS INSIDE.
NO USER SERVICEABLE PARTS INSIDE.NO USER SERVICEABLE PARTS INSIDE.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
REFER SERVICING TO QUALIFIED REFER SERVICING TO QUALIFIED
REFER SERVICING TO QUALIFIED
PERSONNEL.
PERSONNEL.PERSONNEL.
PERSONNEL.
Care
CareCare
Care
Use a soft, clean and dry cloth only to
clean the amplifier. Do not use aggressive
chemicals to clean the housing. Do not
use compressed air to clean the housing.
You may carefully vacuum the air intake
and exhaust areas from time to time to
remove loose dust accumulation.
Please, keep this User Manual for
Please, keep this User Manual for Please, keep this User Manual for
Please, keep this User Manual for
future references
future referencesfuture references
future references
General instructions
General instructionsGeneral instructions
General instructions
Your Heart-Rock head´s special features:
• 3 effect loops
"insert" is a serial loop
"effect" is a parallel loop with
blending control from 0% till 100% on
the front panel,
"pre amp out" "power amp in" is a
second serial loop.
The insert is switched pre-eq, the
effects loop is switched post
eq/pre volume control/pre-DI out.
Pre-amp out - Power amp in are post
master volume/post eq/post DI. This
send/return is very useful for use of
equalizers and stage sound processors
that are not desired to go to the DI
output.
•
Power amp protection circuit
The power amp is short circuit ,
high temperature, and DC voltage
protected. In case of high
temperature or DC current, the yellow
"Protect" LED will come on.
Caution:
Caution:Caution:
Caution:
Please ensure adequate ventilation
when rack mounting the amplifier.
Leave a minimum of 5 mm space
below and above the amplifier. Make
sure that the air entry/discharge vents
at the left side of the housing are
unobstructed.
WARNING!
WARNING!WARNING!
WARNING!
TO REDUCE THE RISC OF FIRE OR
TO REDUCE THE RISC OF FIRE ORTO REDUCE THE RISC OF FIRE OR
TO REDUCE THE RISC OF FIRE OR
ELECTRIC SH
ELECTRIC SHELECTRIC SH
ELECTRIC SHOCK, DO NOT EXPOSE
OCK, DO NOT EXPOSEOCK, DO NOT EXPOSE
OCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
THIS EQUIPMENT TO RAIN OR MOISTURE.THIS EQUIPMENT TO RAIN OR MOISTURE.
THIS EQUIPMENT TO RAIN OR MOISTURE.
Loading...