Globe Food Equipment GSP30A Installation Manual

Model #:

Serial #:

Model GSP30A

Instruction Manual for Globe

Label Printing Scale Model

For Service on Your Scale

1. Visit our website at www.globeslicers.com (select Service button)

2. Or...Call Globe service department at 937-297-7247 and ask for the contact
information for your local service company

Visit our website for information on additional products available from Globe.

GSP30A

www.globeslicers.com

Slicers, Mixers, Vegetable Cutters, Meat Choppers, and Scales

- IMPORTANT SAFETY NOTICE -

This manual contains important safety instructions which

must be strictly followed when using this equipment.

Index

IMPORTANT NOTICE ................................................................................................................................................ 4

SAFETY TIPS ............................................................................................................................................................. 4

INST ALLATION .......................................................................................................................................................... 5

KEY SCALE COMPONENTS ..................................................................................................................................... 5

LOADING/UNLOADING LABELS ...........................................................................................................................6-7

INITIAL SCALE SETUP

Changing Current Date And Time...............................................................................................................................8

Entering Shop Name And Address ............................................................................................................................. 8

PLU SETUP

Setting Up PLU’s ........................................................................................................................................................ 9

Setting Up A Default PLU .........................................................................................................................................10

Deleting A PLU ..........................................................................................................................................................11

PRESET KEY SETUP

Setting Up Preset Keys .............................................................................................................................................11

Setting Up Preset Function Keys...............................................................................................................................11

Deleting Preset Keys ................................................................................................................................................12

OPERATING INSTRUCTIONS

Using Default PLU ....................................................................................................................................................13

Manual Label Print.................................................................................................................................................... 14

Automatic Label Print (Weighed Items) ....................................................................................................................14

Automatic Label Print (Fixed Priced Items) .............................................................................................................. 14

Using Function Keys............................................................................................................................................15-16

Locking/Unlocking Pricing ........................................................................................................................................ 16

CLEANING/MAINTENANCE .................................................................................................................................... 17

TROUBLESHOOTING ............................................................................................................................................. 18

WARRANTY ...................................................................................................................... ....................................... 19

GLOBE FOOD EQUIPMENT CO.
2153 DRYDEN RD
DAYTON, OH 45439
PHONE: [phone]
FAX: [phone]
E-MAIL: [e-mail]
WEBSITE: www.globeslicers.com

© Globe Food Equipment Company, 2007 Printed in the U.S.A.

Important Notice

YOU MUST CALL YOUR LOCAL WEIGHTS AND MEASURES OFFICE BEFORE YOU USE YOUR NEW
SCALE. USUALLY WEIGHTS AND MEASURES IS A DEPARTMENT OF THE COUNTY AUDITOR’S OFFICE.
THIS SCALE MUST BE CERTIFIED BEFORE IT CAN BE USED.

YOU RUN THE RISK OF BEING FINED IF THIS SCALE IS NOT CERTIFIED BY YOUR LOCAL WEIGHTS AND
MEASURES.

Safety Tips

This manual contains a number of precautions to follow in order to help promote safe use of this equipment.

Warnings affecting your personal safety are indicated by:

Warnings related to possible damage to the equipment are indicated by:

To ensure safe operation, the general safety tips below must be followed.

• DISCONNECT the scale from the power source (unplug) before servicing or opening.

• ONLY trained and qualifi ed service personnel should attempt repairs.

• ONLY use correct type and rating of fuses and parts.

• NEVER immerse the scale in water.

• DO NOT put the scale in a dishwasher.

GROUNDING

This machine is provided with a three prong grounding plug. The outlet to which this plug is connected must be
properly grounded. If the receptacle is not the proper grounding type, contact an electrician. Do not under any
circumstances cut or remove the third (ground prong) from the power cord or use any adapter plug.

Page 4

Installation

Make sure the scale is placed on a stable fl at surface.

Avoid the following areas when installing the machine.

• Areas subject to high temperatures or high humidity

• Areas exposed to direct sunlight

• Areas where water or other liquids are easily spilled on the machine

• Areas subject to excessive vibration or unstable surfaces

• Areas exposed to direct cold air

• Areas subject to low temperatures

• Areas subject to a lot of dirt

• Areas with large voltage fl uctuations

Also, make sure the scale is level. If the machine is not level, weighing may not be accurate.

To adjust the machine to a level position, rotate the four adjustment feet until the level bubble is completely
centered in the round level indicator.

Plug the power cord into the AC power outlet on the left side of the scale.

AC Power Cord

Connection

Key Scale Components

On/Off Power

Switch

Vendor Display

Customer Display

Weight Platter

Label Printer

Adjustable Feet

Level

Key Sheet

Operating Keysheet

Scale Set-Up Keysheet

Page 5

Release Lever

Loading/Unloading Labels

Metal Guide

Stopper Lever

Lock Lever

**Label paper
must be against
this edge.

*Label paper
must go under
this bar.

IMPORTANT: Before installing a new roll of labels remove 5 to 6 blank labels
so only backing paper is fed through the printer.

Figure 6-1

Loading Roll of Labels

1. Open the side cover.

2. Release the printer head by pushing the release lever down.

3. Make sure the stopper lever of the roll holder is pulled down.

Roll Holder

Winding Bobbin

Winding Bobbin
Lever

4. Load the label roll onto the roll holder.

5. Insert the label paper (with the label side up) under the metal guide
(see fi gure 6-1).

6. Continue to pull the label paper through and make sure it is fed over the
metal bar shown in fi gure 6-2 and under the bar* in fi gure 6-1.

7. Turn the winding bobbin counter clockwise so the hook is on the top
(see fi gure 6-3).

8. Push the winding bobbin lever in and insert the paper under the winding
bobbin hook (see fi gure 6-3).

9. Turn the winding bobbin counter clockwise several times so the paper
wraps around it.

10. Pull up on the stopper lever then slide it inwards to secure the label roll.

11. Make sure the label paper is against the edge** as shown in fi gure 6-1.

Page 6

Figure 6-2

Figure 6-3

Loading/Unloading Labels

11. Push down on the lock lever until the print head locks into position.

12. With the scale plugged in and turned on, press the FEED key on the keypad once or twice in order to securely
turn the paper around the winding bobbin. Continue to press the FEED button until the labels are ejected
from the printer.

NOTE: If you receive an error message (ERR 9), it indicates that the label is not in the proper position. Press the
CLR key then press the FEED key again to feed the labels through the printer. You may need to do this
step a couple of times.

13. Close the side cover.

Stopper Lever

Release Lever

Lock Lever

Winding Bobbin
Lever

Figure 7-1

Unloading Remaining Label Roll

1. Open the side cover.

2. Release the printer head by pushing down on the release lever.

3. Pull the winding bobbin lever outwards to loosen the paper wound around the winding bobbin then remove
the paper from the winding bobbin.

4. Pull the stopper lever of the roll holder to make it straight then remove the label roll from the path and the roll
holder.

Page 7