Globe’s equipment is designed to provide safe and productive processing, cooking and warming of food products as
long as the equipment is used in accordance with the instructions in this manual and is properly maintained. Unless
the operator is adequately trained and supervised, there is a possibility of serious injury. Owners of this equipment
bear the responsibility to make certain that this equipment is used properly and safely, and to strictly follow all of the
instructions contained in this manual and the requirements of local, state and/or federal law.
Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately trained
and supervised, and have read and understood this manual. Do not attempt to repair or convert any gas types on your
own. Repairs and conversions are to be made solely by an authorized Globe servicer. Owners should also ensure
that no customers, visitors or other unauthorized personnel come in contact with this equipment. Please remember
that Globe cannot anticipate every circumstance or environment in which this equipment will be operated. It is the
responsibility of the owner and the operator to remain alert to any hazards posed by the function of this equipment. If
you are ever uncertain about a particular task or the proper method of operating this equipment, ask your supervisor.
This manual contains a number of precautions to follow to help promote safe use of this equipment. Throughout the
manual you will see additional warnings to help alert you to potential hazards.
Warnings affecting your personal safety indicated by:
OR
Warnings affecting your possible damage to the equipment and property are indicated by:
If any warning labels or this manual are misplaced, damaged, or illegible, or if you require additional copies, please
contact your nearest representative or Globe for these items available at no charge.
Please remember that this manual nor the warning labels do not replace the need to be alert, to properly train and
supervise operators, and to use common sense when using this equipment.
Page 3
Unpacking & Installation
TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE:
• ALWAYS install equipment in a work area with adequate light and space.
• ONLY operate on a solid, level, nonskid surface that is nonammable and away from sinks and water hazards.
• NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create hazards and will void the warranty.
GAS and GAS PRESSURE
This unit is factory supplied in Natural Gas. This unit can be converted to L.P. gas by a
licensed and certied gas technician. Documentation may be necessary for warranty issues.
Failure to comply with this instruction, will void warranty.
See the included L.P. conversion kit for gas conversion parts and instructions.
Unit installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, the
National Gas Installation Code, CSA-B149.1, or the Propane Installation Code, CSA-B149.2
as applicable and in accordance with local codes.
The appliance and it’s individual shutoff valve (to be supplied by user) must be disconnected
from the gas supply piping system during any pressure testing of that system at test pressures
in excess of ½ psi (3.45 kPa).
These models are designed, built, and sold for commercial use only.
Instructions must be posted in a prominent location. All safety precautions must be taken in the event the user smells
gas. Safety information can be obtained from your local gas supplier.
UNPACKING
Unpack the griddle immediately after receipt. Remove the gas griddle from the crate; remove all packaging on and
surrounding the unit, and be certain to remove protective plastic and residue from all surfaces. Make sure that all
parts, including the L.P. gas conversion kit, are provided.
If the equipment is found to be damaged, save the packaging material and contact the carrier within fteen (15)
days of delivery. Immediately contact Globe service or your local dealer of the equipment. You have no recourse
for damage after fteen (15) days of receipt of griddle.
Page 4
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.