Globe’s equipment is designed to provide safe and productive processing of food products as long as the
equipment is used in accordance with the instructions in this manual and is properly maintained. Importantly,
unless the operator is adequately trained and supervised, there is a possibility of serious injury. Owners of this
equipment bear the responsibility to make certain that this equipment is used properly and safely, strictly following
all the instructions contained in this manual and the requirements of local, state or federal law.
Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately
trained and supervised and have read and understood this manual. Owners should also ensure that no
customers, visitors or other unauthorized personnel come in contact with this equipment. Please remember that
Globe cannot anticipate every circumstance or environment in which its equipment will be operated. It is the
responsibility of the owner and the operator to remain alert to any hazards posed by the function of this
equipment, particularly the sharp knife blade and all moving parts. If you are uncertain about a particular task or
the proper method of operating this equipment, ask your supervisor.
This manual contains a safety tips section listing a number of precautions to follow to help promote safe use of this
equipment. Throughout the manual you will see additional warnings to help alert you to potential hazards.
Warnings affecting your personal safety are indicated by:
or
Warnings related to possible damage to the equipment are indicated by:
Make certain the instruction manual is available for easy reference by any operator. Globe has put a warning label
in the English language on its slicers. Spanish warning labels are available upon request to Globe. If the
warning label or manual becomes misplaced, damaged, illegible or if you require additional copies, please contact
your nearest representative or Globe directly.
Please remember that this manual or the warnings do not replace the need to be alert, to properly train and
supervise operators and to use common sense when using this equipment.
Page 3
Sharpener
Slicer Table
Knife Cover Release
Knob
Key Components of the Slicer
Knife Cover
Endweight
Endweight Handle
Slice Deector
Power Cord
Receiving Area
On/Off Switch
Food Chute
Food Chute Release
Knob
Slice Thickness Dial
Model C10 Shown
Feet
Page 4
Globe Chefmate Slicer Safety Tips
SHARP KNIFE BLADE
TO AVOID SERIOUS PERSONAL INJURY:
• NEVER touch this slicer without training and authorization from your supervisor or if you are under 18 years
old. Read this instruction manual rst.
• ONLY install the slicer on a level nonskid surface that is nonammable and is located in a clean, well-lighted
work area away from children and visitors.
• ALWAYS ground slicer utilizing proper power source.
• NEVER TOUCH KNIFE. Keep hands and arms away from all moving parts.
• NEVER OPERATE the slicer without the knife cover securely installed.
• NEVER put hand into the chute arm opening on the right side of the slicer.
• ONLY USE FOOD CHUTE HANDLE to push food chute during slicing.
• ONLY USE THE ENDWEIGHT, NOT YOUR HAND, to hold food products when slicing. Never put your hand
on or around food chute when slicer is on.
• DO NOT CATCH SLICES WITH YOUR HAND. Let slices drop onto the receiving area.
• BEFORE CLEANING, SHARPENING, SERVICING, OR REMOVING ANY PARTS, always turn the slicer off,
turn the slice thickness dial clockwise until it stops, remove the food chute and unplug the power cord.
• USE ONLY GLOBE CHEFMATE SLICER ACCESSORIES properly installed.
Page 5
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.