Globe 4600N-68 User Manual
Project Name: AIA#: Model #:
Location: SIS#: Item #: Quantity:
4600N-68
Supermarket
Deli Meat
Heavy-Duty
Manual Slicer
Supermarket Model:
r 4600N-68 Manual Slicer
GLOBE FOOD EQUIPMENT COMPANY
2010
Made in the U.S.A.
Certifi ed by NSF International to go above and beyond standard performance!
NSF ANSI 8 2010 Standard
Premium Construction
• 13'' PreciseEdge™ stainless steel knife
blade with maximum tip-edge-holding ability
• Exclusive stainless steel construction, with
superior corrosion resistance against acids found
in fruit, meats and vegetables
• Best of the Best, EZ-Glide™ slice system
• No-drip base with Marine edge redirects liquids
to center of base away from controls and operator
• Precise slice-thickness adjustment, one-piece
handle, gear driven and gasket-sealed
• Carriage angle: 45°, full gravity feed
• 2° angled drip groove on the slicer table directs
the ow of liquids to the base
• 15'' long chute with 3 lb. stainless steel end weight
• Powerful 1/2 HP, 7 amp continuous use motor
• High-performance gear knife drive
• Maintenance-free drive system
• Permanently attached knife ring guard with
removable slice de ector
Food Zone Features
• Quick-Clean™ proprietary non-stick nickel-based
coating (knife cover and slice table)
• Large stainless steel radii, open space base
design for cleaning and simple dismantling of
components
• Base has a Marine edge from 1/2’’ to 3/4’’ wide
and indented areas with 3/16’’ deep radiused
u
r
o
m
y
o
h
b
t
i
i
w
n
a
c
S
l
e
d
e
v
i
c
e
.
GLOBE FOOD EQUIPMENT COMPANY
2153 Dryden Rd., Dayton, OH 45439
Phone: 937-299-5493 Fax: 937-299-4147
800-347-5423
www.globeslicers.com
transition and 3/16'' deep internal coved corners.
Both are integral to the base’s work surface
• Knife sharpening system is removable and BPA Free
(no-bisphenol-A), immersible, and dishmachine-safe
for cleaning and sanitizing
• High moisture application package
• Moisture proof, easy-to-clean direct contact start/stop
touchpad controls
• Sealed splash zones for added sanitation and
protection of electronics
Operator Full-featured Protections
• Home position start
• Table lockout- removal of the knife cover locks the
slicer table so it cannot be opened. Additionally, the
slicer table fully covers the knife edge during
cleaning
• Automatic shut-off after 10 seconds
• No voltage release prevents inadvertent reactivation
of slicer in the event of power or interlock interruption
• Knife cover interlock prevents slicer from operating
without the knife cover in place
• Permanent knife blade ring guard, removable cover
and de ector
• Touch pad start/stop controls and power indicator
light
• Ergonomic low-pro le design reduces operator
fatigue
• Dual arm lift lever for cleaning and sanitizing under
the slicer
Approved By:
Date:
Supermarket Deli Meat Manual Slicer 4600N-68
Supermarket Deli Meat Heavy-Duty Manual Slicer 4600N-68
24.8(63.0)
Elevation / Front View
24.8(63.0)
14.0(35.5)
17.3(44.0)
Side View/Lift Lever
27.7(69.3)
25.0(63.5)
4600N-68
Side View
21.6(53.3)
Top View
26.6(67.6)
Drawings available through KCL. www.kclcad.com
4.1(10.4)
Model Elevation Right Plan Back BIM 3D Revit
4600N-68
SPECIFICATIONS
Model Motor Volts Amps Drive
Type
4600N-68 1/2 HP 115-60-1 7 Gear All Day
Slicing Volume
per Day
Cheese
Slicing
Time
100%0
Blade
Diameter
13''
(33.02 cm)
Cord & Plug: Attached 7 foot exible 3-wire cord with molded plug ts a grounded receptacle. NEMA 5-15
INCLUDED:
r Stainless steel low food fence
(12'' L x 1 ⅜'' H)
SLICER ENHANCEMENT ACCESSORIES:
r Stainless steel high food fence
(12'' L x 3'' H)
r 7'' D x 14'' L Stainless steel
Max
Slice
1-1/4''
(3.18 cm)
WARRANTY:
• 15 years on the knife drive gears
• Two-years parts
• One-year labor
Product Cutting Capacity
D
(Diameter)
7.5''
(19.50 cm)
W
(Width)
11.6''
(29.46 cm)
(Height)
(22.86 cm)
vegetable hopper
r Clear plastic slicer cover
(Tip: Recommended for preconstruction)
r Additional cleaning brush
DIMENSIONS & SHIPPING INFORMATION
Cartons are reinforced for shipping. The weight and dimensions of this reinforced carton are included below and may vary from shipment to shipment.
Model Foot Print Overall Dimensions Net Weight Shipping Dimensions Shipping Weight
4600N-68 14'' D x 21.6'' W
(35.5 cm x 53.3 cm)
26.7'' L x 24.8'' W x 25'' H
(67.9 cm x 63 cm x 63.5 cm)
120lbs.
(50.8 kg)
28''L x 25'' Wx 28'' H
(71 cm x 63.5 cm x 71 cm)
Warranty valid in North America.
Contact factory for warranty in other countries
Freight Class 77.5
152lbs.
(65 kg)
H
9''
GLOBE FOOD EQUIPMENT COMPANY
www.globeslicers.com
Ver. 1. 0812-B Rev. 0 GFE0812
Specications are subject to change without notice.Printed in U.S.A. 08-2012
2153 Dryden Rd.
Dayton, OH 45439
Phone: 937-299-5493
Phone: 800-347-5423
Fax: 937-299-4147
Loading...