Global Upholstery Co 5440LM-1 User Manual

Page 1
obus ultra forme
tm
The New Science in Back Pain Relief
doctor designed
comfort
Page 2
Corporate member of ACE
Membre corporatif de l’ACE
Features and Benefits of a Synchronized Glider Mechanism
ObusULTRAforme features a new Synchronized Glider mechanism
which incorporates the benefits of many chair mechanisms into
one. Feet can stay flat on the floor while tilting which relieves
pressure under the thighs and encourages good blood flow.
The back angle relative to the seat is easily adjustable allowing
the user to individualize support and comfort. Tilt tension is
adjustable from a seated position, simply by turning the dial
beside the seat. The Synchronized Glider mechanism provides a
dramatic gliding/tilting action, setting the standard for seating
comfort and adjustability.
to reduce back & neck pain, fatigue & headaches.
support
natural‘S’curve
For a free download of the
BIFMA Ultimate Test for Fit, go to:
www.bifma.org/standards/ergoguideline.htm
with Moller back support is clinically proven
TM
Endorsements:
Robert L. Dubin,D.C. Past President California Chiropractic Association Petaluma, CA
“After 30 years in practice helping people with lower back pain, I can unequivocally state that the Moller device is the best one I have seen to date. I can and will recommend this device without hesitation for anyone looking for better support while they are sitting. Thank you for introducing me to this wonderful product.”
Erda Sanders, D.C. Oakland, CA
“I have previously tried other back supports, and have not been able to get the satisfying results I got when using the Moller. Based on my uniformly good experience , I highly recommend the Moller back support and will be recommending it to my patients.”
R. Lane Smith, Ph.D. Stanford University.
“I believe that this support is superior to many other products intended for lower
back support. It focuses the support to a specific region....It is an excellent choice
for individuals who have lower back pain.”
Torsten Jacobsen M.D. Orthopedic Surgeon Concord, CA.
“I have often prescribed the Moller lumbar back support for my patients with both mechanical and discogenic back pain.”
Doctor Tracy Newkirk M.D. of the METS clinic, San Rafael,CA.
“We now know that poor posture compromises circulation. We can actually prove objectively that a neutral spinal posture creates many benefits other than just spine support.” “Our multi-disciplinary pain clinic has relied on the Moller Back support technology for patients who have a variety of pain problems”.
5440-1 High Back Synchronized Glider
Shown in Identity ID05 Poppy
The Problem:
The Solution:
Poor posture is responsible for many back problems:
A majority of adults experience severe back pain, greatly affecting their daily activities. The obusULTRAForme with Moller back support can help alleviate many of these problems. Using correctly designed seating can dramatically increase comfort, attentiveness, productivity and general well-being.
Round shoulder posture creates an unhealthy “C” curve in the spinal column instead of a more natural and self supporting “S” curve.
A slumped posture can compress nerves and blood vessels that are directly behind the collarbone. The natural result of blood vessel compression is a slowing of circulation.
Symptoms of slowed circulation caused by a round shouldered posture may include neck, back and hip pain, headache, blurred vision, numbness tingling or weakness of the hands and cold feet.
ObusULTRAforme with Moller back support provides full spinal column support and maintains a natural lower spine configuration. With the Moller back support system in place, two important improvements can occur:
1) Correcting the position of the shoulders and collar bones reduces compression of the veins and improves slowed circulation which may result in a reduction of symptoms.
2) The upright supported posture may also decrease the strain on the small lower back muscles, thereby reducing fatigue and discomfort.
obus ultra forme
tm
Page 3
Back Height adjustment:
Grasp the back, lift it gradually to position the lumbar support in the right spot for your body. Lower the back by lifting to top position to reset ratchet.
Multi-tilt Control:
Encourages the ability to angle the seat forward, to relieve pressure under the thighs. Leaning to the rear, rotate lever clockwise to enable angle, counter clockwise to disengage.
Arm Width Adjustment:
“WA” is standard. Release cam lever (under seat) and slide arm in and out. Close cam lever to lock in place. Armcap also slides laterally to narrow chair width.
Armcap Depth Adjustment:
Slide arm forward or backward to position for desired preference. Armcap rotates 30˚ to provide more effective support for keyboarding.
Height Adjustable Arms:
Push button on the side of the arm and raise or lower arm to desired height, then release button.
Seat Depth Adjustment:
A sliding mechanism (MD) allows forward and backward movement. Pull up on lever. Slide seat to desired depth, release lever to lock position.
Tilt-Lock Control:
Pull up on the lever to the left of the seat and the tilting action of the chair moves freely, push down on the lever and that seat/back angle is locked in position.
Back Angle Adjustment:
Back angle adjusts separately to maximize comfort for all users.
Upper back design: The slim shape allows and encourages freedom of upper body movement. The patented design promotes a position of the shoulders and collar bones which relieves pressure on the blood vessels and nerves in the upper body. This may result in a reduction of the symptoms of back pain and general fatigue.
Back height adjustment: Vertical back height adjustment allows the user to raise the back and position the lumbar support in the right spot for each individual. This is accomplished via an internal ratchet concealed inside the back.
Arms: Armcaps are soft and warm to the touch and are made from durable polyurethane that protects furniture from impact damage. The arms are height and width adjustable and feature a sliding armcap that slides forward or backwards or over top of the seat, and swivels to a 30˚ angle to accommodate user preference.
Seat Design: The seat is designed to evenly distribute the body’s weight over the full seat. The front edge of the seat, has a rounded waterfall shape that helps reduce pressure on the thighs while tilting. Both are designed to encourage proper blood flow to the lower extremities.
Seat Depth: Seats feature a sliding mechanism that allows forward and backward depth adjustment. Match your thigh length for optimum comfort and support.
Seat Height: Seats are equipped with a pneumatic lift that allows the user to select the proper seat height for their working preference and leg length.
Adjustable tilt tension: Chair features tilting action which allow users to adjust the balance of the spring tension by turning the dial beside the seat. We strongly encourage users to match their body weight to the spring tension for comfortable, smooth, and supportive movement.
5440LM-1 High Back Synchronized Glider
Shown in Black 450/550 Leather
5440-1 High Back Synchronized Glider 5440-1 High Back Synchronized Glider
Page 4
25.5 26 50.5
648 660 1283
16.5-20.5
419-521
25.5 26 49
648 660 1245
16-20
406-508
25.5 26 44.5
648 660 1130
16.5-20.5
419-521
25.5 26 43.5
648 660 1105
16-20
406-508
5440-3 High Back Multi-Tilter
Arms are height/width adjustable and slide forward or backwards. Back height/seat depth adjustment. Independent seat and back angle adjustments. Tilt-tension dial beside seat.
5440LM-3 As above except Leather or Leather/Mock Leather Combination
5441-1 Medium Back Synchronized Glider
Arms are height/width adjustable and slide forward or backwards. Back/seat height adjustment. 2.5 to 1 ratio of seat to back movement. Seat depth adjustment with tilt-tension dial beside seat
5441LM-1 As above except Leather or Leather/Mock Leather Combination
5441-3 Medium Back Multi-Tilter
Arms are height/width adjustable and slide forward or backwards. Back height/seat depth adjustment. Independent seat and back angle adjustments. Tilt-tension dial beside seat.
5441LM-3 As above except Leather or Leather/Mock Leather Combination
Global - International
560 Supertest Road Downsview Ontario Canada M3J 2M6 Tel (416) 661-3660 (800) 668-5870 Fax (416) 667-1821
GGI Office Furniture (UK) Ltd.
Global Way Darwen Lancashire UK BB3 ORW Tel +44(0) 1254 778500 Fax +44(0) 1254 778519
Global - U.S.A. 17 West Stow Road P.O. Box 562 Marlton New Jersey U.S.A. 08053 Tel (856) 596-3390 (800) 220-1900 Fax (856) 596-5684
Global - Canada The Global Group, 1350 Flint Rd., Downsview ON Canada M3J 2J7 Sales & Marketing: Tel (1-877) 446-2251 Customer Service: Fax (800) 361-3182 Government Customer Service: Fax (416) 739-6319
Visit us on the World Wide Web at www.globaltotaloffice.com
Offices throughout Canada, United States, United Kingdom, France, Brazil, Australia and Italy. Distribution around the world. A member of the Global Group.
© 2005 ® ™ Trade-Marks of GLOBAL TOTAL OFFICE. These products may be covered by one or more issued patents or pending patent applications in Canada, the U.S. and elsewhere.
All intellectual property rights in applicable trademarks, patents and industrial designs are strictly reserved. Specifications are correct at time of printing. Printed in Canada. Creative / Global Group Design Center 090207 / R0 410.1188
DIMENSIONS
WD H
IN IN IN
mm mm mm
SEAT HEIGHT
IN
mm
DESCRIPTION
5440-1 High Back Synchronized Glider
Arms are height/width adjustable and slide forward or backwards. Back/seat height adjustment. Independent back angle adjustment. 2.5 to 1 ratio of seat to back movement. Seat depth adjustment with tilt-tension dial beside seat.
5440LM-1 As above except Leather or Leather/Mock Leather Combination.
obus ultra forme
tm
Those who suffer from chronic back pain and headaches know that it can disrupt the
enjoyment and productivity of daily life. Healthcare professionals and industrial
designers have worked hard to develop new technologies that can help alleviate
many of these problems. A focus of this research is proper posture and back support
and now there is a proven solution. The obusULTRAforme chair with Moller back
support system: The back is composed of three natural curves. Ideally these curves
form an “S” shape. Maintaining this “S” shape is imperative to avoiding pain and
injury over time. Unlike most back support devices. The obusULTRAforme with
Moller back support system is a scientifically designed device that encourages this
correct alignment.
Loading...