Global Technology Six-bay Multi-chemistry Charger, Patriot Operation Manual

PATRIOT CHARGER
®
Six-Bay Multi-chemistry Charger
OPERATIONS MANUAL
Global Technology System - Revision 3
Contents
Introduction 2
Equipment Supplied 3
Safety Guidelines
Warning
Product Specification
Operation 4
Compatible Batteries 5
Troubleshooting 7
Cleaning 7
RF Devices 8
Replacement Parts
Warranty and Support
3
3
3
8
8
1
Global Technology Systems Inc. reserves the right to change, update and modify procedures and specifications without notice.
Motorola is a registered trademark of Motorola, Inc.
®
Introduction
The Patriot Six Bay Battery Charger is a charger for the Motorola XTS3000, XTS3500, XTS5000, HT1000, MT1000, JT1000, MTS2000, MTX8000, and MTX9000 Radio batteries. The product is designed for Multi-Chemistry (Li-Ion, Ni/CD or Ni/MH) operation.
The Patriot Charger has the capability of charging the specified Honeywell Batteries as
well as batteries provided by other suppliers (as approved by Honeywell Battery Services).
The Patriot Charger is user friendly and does not require manual setting for charging or battery maintenance parameters. The product is designed for desk top operation and as an in-vehicle charger/conditioner when used with the appropriate car power adapter.
The 6 bay Patriot charger is design for desk top or wall mounted operation without the need for any additional bracketing hardware.
This reference guide provides basic instructions on the set-up and use of the Patriot Charger. Unless otherwise noted, the term charger refers to the single bay version of the
Patriot Charger series of products.
It is suggested that the Motorola radios listed above be inserted into the charger in the OFF mode. Upon charge initialization the radio battery will accept a full charge in the following operating modes: standby, receiving, or transmitting modes.
Please contact your HB service representative for information on the in-vehicle DC mounting bracket.
® ®
® ®
®
®
®
®
®
®
2
Loading...
+ 8 hidden pages