GST Bluetooth Headset - GL2BHS82
CONTENTS
1. Product General Information----------------------------------------------------------1
1.1 Production Description ------------------------------------------------------------1
2. Product General Specifications ------------------------------------------------------1
2.1 General specifications -------------------------------------------------------------1
2.2 Function Button/Indicators --------------------------------------------------------2
3. Regulation Compliance-----------------------------------------------------------------3
4. Environment Requirement-------------------------------------------------------------3
4.1 Drop and Vibration-------------------------------------------------------------------3
4.1.1 Anti-Static Voltage-----------------------------------------------------------3
4.1.2 Vibration Test-----------------------------------------------------------------3
4.1.3 Package Drop Test----------------------------------------------------------3
4.2 Usage Condition----------------------------------------------------------------------3
4.2.1 Temperature Range---------------------------------------------------------3
4.2.2 Temperature-------------------------------------------------------------------4
4.2.3 Humidity------------------------------------------------------------------------4
5. Getting Started-----------------------------------------------------------------------------4
5.1 Charging --------------------------------------------------------------------------------4
5.2 Compatible chargers-----------------------------------------------------------------4
6. Instructions ---------------------------------------------------------------------------------5
6.1 To turn the headset on---------------------------------------------------------------5
6.2 To turn the headset off---------------------------------------------------------------5
6.3 Pairing the headset-------------------------------------------------------------------5
6.3.1 Pairing (Dual Pairing) -------------------------------------------------------6
6.3.2 Resetting the headset to another device-------------------------------6
6.3.3 Switching the headset from a paired device to the other-----------7
6.4 Answering incoming calls-----------------------------------------------------------7
6.5 Speaker Volume Control-------------------------------------------------------------7
6.6 End a call--------------------------------------------------------------------------------7
7. Examples -----------------------------------------------------------------------------------8
7.1 Computer connect to headset-----------------------------------------------------8
1. Product General Information
1.1 Product Description
GL2BHS80 is a wireless portable headset which enable to answer
incoming calls wirelessly from a Bluetooth devices that support Headset
profile, Audio Gateway role, such as GST voice/data access point,
Bluetooth mobile phone in proximity.
2. Product General
2.1 General Specifications
Product Name Bluetooth Headset GL2BHS80
Product Category End-user portable product
Bluetooth specification Bluetooth 1.1 compliant
Qualification /list date Q1 2003
Support Profile GAP, SPP, Headset (Headset role only)
Power Class Class 2
Support packet types HV1/HV3
Support hopping mode USA/EU (79 channel)
Interoperability All devices that support the Bluetooth Headset
profile, Audio Gateway role. Example: GST
Bluetooth voice/data Access Point, Bluetooth
enable cell phone, smart phone.
Sensitivity <-80dBm@0.1%BER
Output Power -6 ~ +4dBm
Frequency range 2400-2483.5MHz
Size
Total Weight
Base color Light Gray
Ta lk Time 3.5hrs
Standby time 100hrs
Packaging Giftbox
Compatibility Sony EricssonT39, T68, T68i, R520, P800
Nokia 6310, 6310i, 8910
Motorola T270
Philips 820
Rechargeable battery 150mA
Power Adapter DC 5V adapter
1
2.2 Function button/ indicators
Symbol Functions
Call handling button(Θ) Handle calling function; answer a phone
Power on/off call forwarded from Bluetooth Audio
Gateway device; Power on/off
Volume Up button Adjust volume up, pairing, switch
connecting device
Volume Down button Adjust volume down, pairing, switch
connecting device
Function LED RED slow flashing during battery low
RED fast flashing during waiting pairing
GREEN flashing during standby
LED off during power off mode
Charging LED RED during charging. Light off when the
battery is fully charged
Speaker
Microphone
Rechargeable connector
Call handling & Power ON/OFF
Charging LED
Battery Charging
Function LED
Volume Down Volume Up
2
Speaker
Battery Charging
Microphone
3. REGULATION COMPLIANCE
Compliant with
FCC Part 15 Class B, (To be confirmed)
ETS 300 328, ETS300 826 (To be confirmed)
Bluetooth Test Specification v1.1 compliant. (To be confirmed)
4. ENVIRONMENT REQUIREMENT
4.1 Drop and Vibration
4.1.1 Anti-Static Voltage
Static voltage tests by 4KV in body should not cause system fail.
4.1.2 Vibration Test
The vibration test is under the Frequency and amplitude 10~25 1mm in
vertical and horizontal direction by 30 minutes that should not cause any
damage on product.
4.1.3 Package Drop Test
Dropping the package from the height of 50cm for each of the six(6) faces
onto the hard-wood floor will not cause any product damage.
4.2 Usage Condition
4.2.1 Temperature Range
Operating -0
o
C ~ +55oC
Storage -20 oC ~ +70oC
3
4.2.2 Temperature Shock
The one cycle of reliability test is keeping -20
temperature up to +60 oC within one hour, and testing at +60 oC by 2
hours, and switching temperature to -20 oC within one hour. Three cycle
should be tested and without any product fail.
4.2.3 Humidity
Operating 0% to 70%
Storage 0% to 95% Non-condensing
o
C for 2 hours, switching
5. Getting Started
Before you start using the headset with a Bluetooth enabled phone or other
devices for the first time, you should:
Charge the battery using the enclosed GST 5V charging adapter
Pair the headset with a device (Audio Gateway role), such as Bluetooth
enabled cell phone, Access Point.
5.1 Charging
The GL2BHS80 build in a rechargeable battery. The battery is not fully
charged when you buy the headset. Before using the headset in the very first
time, please charge the battery until the charging indicator (RED LED) light off.
If charging indicator turns red, this remind you that you need to recharge
the battery.
It takes 2.5 to 3 hours to fully recharge the battery.
During charging, the charging LED light shows a steady red light if the
battery is not fully charged; After battery is fully charged, charging LED
light off.
When battery is fully charged; Function LED turns off if headset is off;
Function LED light flashes green if headset is on.
When the battery is fully charged, if the Function LED light flashes red in a
very short time, this means the battery is about end of life. Please
purchase a new GST rechargeable battery to replace.
5.2 Compatible chargers
Standard 5V charger (standard pack)
Traveler 5V charger (optional pack)
Cigar-lighter charger (optional pack)
4
6. INSTRUCTIONS
GL2BHS80 Headset has dual pairing function (patent protected). Dual pa iring
functions means that the headset is able to listen to incoming calls from 2
different cell phones. This user guide will instruct you how to set up a
dual-paired function, switch connections and answer phone call from different
devices.
6.1 To turn the headset on
Press and hold the call handling button (Θ) around 1second until Function
LED flashes green.
Then Function LED flashes GREEN every 5 seconds, this means the
headset has been turned on and you are ready to answer incoming calls.
If Function LED flashes RED every 7 seconds, this means low battery,
please recharge the battery.
If Function LED flashes RED every 3 seconds, this means the headset
have not be paired yet, you need to pair the headset with audio gateway
device first.
If Function LED flashes GREEN every 5 seconds, this means the headset
automatically connect with the paired devices and ready to answer
incoming calls.
6.2 To turn the headset off
Press and hold the call handling button (Θ) around 7 seconds until you
hear a long beep tune and Function LED lights off. This means the
headset is turned off, and you are unable to answer any call.
6.3 Pairing the headset
Before you can use the headset, you must pair it with the audio gateway
devices (such as mobile phone) you want to use it with. Once you have
paired the headset with the audio gateway device, you do not need to pair
again until you want to use this headset with another phone.
The headset will automatically register the audio gateway device into memory,
you do not need to pair again even the headset is turned of and turned on next
time.
5
Dual-pairing functions
The GST headset is enable for dual-pairing, which means that your headset
can be paired with 2 different devices, for example, one mobile phone, and one
GST voice/data Access Point. After the headset has been paired
successfully, the headset will manual switch connection from one device to the
other.
6.3.1 Pairing
1. The headset uses volume up button and volume down button to accept
pairing requests from 2 different devices.
2. After you turn the headset on, the Function LED flashes RED every 3
seconds, this means the headset is ready for pairing and you may start
pairing procedure directly. Function LED will flashed RED until the
headset has been paired or turned off.
3. Volume down button is default set as a paired key.
4. Continue according to the instructions in the pairing devices’ user
documentation. The headset passkey is 0000.
5. When pairing success, Function LED flashes GREEN every 5 seconds. If
Function LED flashes RED every 3 seconds, means pairing failed. You
need to re-pairing again.
6. If you want to have your headset to be paired with 2
nd
device. Press and
hold the volume up button 7 seconds until you hear 2 long beep tune and
headset is turn off. Press call handling button (Θ) around 1 second, the
headset is turned on again, then you will see the Function LED flashes
RED every 3 seconds, the headset is now ready to be paired with another
device. The pairing procedure is same as the first pairing procedure.
6.3.2 Resetting the headset to be paired to another audio gateway device
You may want to reset the headset to be paired with from one audio gateway
device to the other.
With the headset turned on, press and hold Volume Up button (or volume
down button) around 7 seconds, until you hear 2 long beep tune, the
headset will be turn off. Then press call handling button (Θ) around 1
second to restart the headset. When Function LED flashes every 3
seconds, means the headset already clear pairing. Then you can pair
the new device again.
6
6.3.3 Switching the headset from a paired device to the other
The headset can only receive an incoming call from only one device at a time,
no matter one or two devices it is paired with. However, you can set up the
priority of receiving 2 devices’ incoming calls.
If the headset has been paired with 2 devices, you need to remember
which device you paired with by volume up button, and the other by
volume down button. The headset use volume up and volume down
buttons to manage 2 pairing devices.
Select the high priority pairing device you prefer, and press the volume up
or volume down button (depend on the button when you set up pairing
devices) around 2 seconds, until you hear a long beep tune, release the
button, then Function LED will fresh GREEN every 5 seconds. This
means the headset has been switched to the 1st priority pairing device and
auto connected.
If the headset is only paired with one device, even though you press
volume up or volume down button try to switch the priority , the headset still
remain the only paired device as 1
st
priority.
The priority setting will remain internally of the headset and keep the
setting until you try to clear pairings or reset priority again. It won’t lose
priority setting when you turn off the headset.
6.4 Answering incoming calls
When a call is forwarded from a pairing device to the headset, the headset
rings as well. Press any button to answer a call.
6.5 Speaker Volume control
Press “+” to volume up
Press “-“ to volume down
6.6 End a call
After you finish a call, press call handling button (Θ) to finish a call. Y ou need
always to press call handling button (Θ) to release a call, otherwise, the
headset will remain the connection with the pairing device.
7
7. Examples
Bluetooth Headset 應用範列
7.1 Computer connect to headset
Install Widcomm 1.3.2.7, insert the CD we provide, and follow the
installation wizard to complete the installation process.
Set up the Bleutooht Headset into paring mode, press Volume up or
V olume down button for 5 seconds until Function LED turn of f. The press
Take key for 3 seconds until LED flashes RED, then you may start Pairing
procedure.
Double click My Bluetooth Places Icon
Double click Entire Bluetooth Neighborhood
Double click GST-headset Icon
8
Double click Headset on GST-headset Icon
Click Bluetooth Icon
Enter Ping Code (“0000” default setting) -> press OK button
After click OK button, you will hear a beep tune from Headset, press any
key on Headset to accept the connection request. After connection has
been established, all of the voice from audio data (such as MP3 files) will
be forwarded from computer to Bluetooth Headset.
9
7.2 T68 connect to Bluetooth Headset
Set up the Bleutooth Headset into paring mode, press Volume up or
V olume down button for 5 seconds until Function LED turn of f. The press
Take key for 3 seconds until LED flashes RED, then you may start Pairing
procedure.
Enter T68 manual, select ->Connect
Select Bluetooth
Select Discover
Select GST-Headset
Enter “PIN Code” (Default setting ”0000”)
Save pairing headset
When a phone call coming, press any button to answer the call via
Bluetooth Headset
Press Talk button to end a call.
FCC Notices
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may
cause undesired operation .
“FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in conjunction
With any other antenna or tran smitter.”
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO
THIS EQUIPMENT. SUCH MODIFICATIONS COUL D VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
10
Loading...