![](/html/0e/0e6e/0e6e42e538c385aceab73d720e0d3863f5ec15497e1a801de6df73e77e6ad8a9/bg1.png)
• Choose your power source: 6.3/12.6 V AC power,
• Draw power from banana plug connections or the
• Flush-mounted, removable circuit breadboard with
The PB-507 Advanced Analog & Digital
Electronic Design Workstation, is a
powerful, versatile tool for circuit
designers, engineers, technicians,
students, and hobbyists. All digital
controls, USB port, and a wide choice of
built-in circuit accessories allow rapid
and accurate construction of virtually
any type of analog or digital circuit.
New on the PB-507 is an LCD that
displays the settings for the active
module selected. Simply touch a control
element and the LCD switches to that
module and displays its settings. Use
the USB connection on the PB-507 to
control or view the module’s values
from a PC. Using this feature you can
project the controls to a large viewing
screen for a classroom to observe and
follow.
The breadboard area is the largest in
our trainer family and is removable for
easy replacement.
The PB-507 is designed to withstand the
toughest treatment. It is constructed
with the highest quality components for
many years of reliable service. The all-
digital circuitry allows for easy function
verification and calibration.
Advanced Analog & Digital
Electronic Design Workstation
contains the
following
modules:
DC Power
Supply*
AC Power
Supply
Function
Generator*
Frequency
Counter*
Logic Probe
Hex to 7
Segments
Decoder
Debounced
Pushbuttons
Logic switches
SPDT switches
Potentiometers
Speaker
*Active module
that functions
with LCD
LCD displays the settings from each active
module
USB connection enables viewing and controlling
from a PC
5 V DC or variable ±20 V DC
tie-point power supplies above each breadboard
bus strip
Powerful 1 MHz bandwidth Function Generator
with sine, triangle, and square wave outputs
Pulse Generator operates like a second,
independent Function Generator where you can
modify the duty cycle between 10 to 90%
Frequency Counter module reports on the output
of your own specially designed circuits
over 4,100 contact points
![](/html/0e/0e6e/0e6e42e538c385aceab73d720e0d3863f5ec15497e1a801de6df73e77e6ad8a9/bg2.png)
3-wire AC Input with 110 V/220 V
Selector Switch
Fixed 5 VDC @1 A
Variable DC - Positive: 0 V to +20 V
@0.5 A
Variable DC - Negative: 0 V to -20
V @0.5 A
Fixed AC - 12.6 V Center-tapped @
100 mA
0.1 Hz to 1 MHz selectable in 7
ranges
Output Voltage: 0 to + 10 V (20 Vpp)
Output Impedance: 600 Ω
Output Waveforms: Sine, Square,
Triangle, TTL
Frequency Range: 0.1 Hz to 1 MHz
in 7 ranges
Output Output Mode: TTL or CMOS
(switch selectable)
Output Voltage: 0 to 15 Vp-p
Duty cycle range: 10 to 90%
Frequency Range 0.1 Hz – 1 MHz
LCD Display: Reads Volts, Amps &
Frequency
(2) BCD to 7 Segment Display
Circuits
8 Bicolor LEDs: Red (High) and
Green (low)
TTL/CMOS compatible Logic Probe
(8) Individual Logic Switches
(2) Open Collector Output Pulsers
(2) Single Pull Double Throw
(SPDT)
4150 tie points, removable
Tied directly to Power Supply
Outputs
5.5” x 16.5” x 12.75” (H x W x D)
Limited two-year warranty
WK-1: Jumper Wire Kit, 350
pieces
WK-2: Jumper Wire Kit, 140
pieces
WK-3: Jumper Wire Kit, 70
pieces
WK-4: Wire Jumper Kit, 100
wires with machined tips
GSPA Series: Prototyping
adaptors
GSPA-K1: Surface mount to
DIP adaptor kit, 6 adapter
boards
GSPA-K2: Surface mount to
DIP adaptor kit, 11 adaptor
boards
GSA-3185: Minipro Test Clip
Set
PB-507 Advanced Analog & Digital
Electronic Design Workstation
© 2014 Global Specialties V20140204 22820 Savi Ranch Parkway Yorba Linda, CA 92887 1.800.572.1028
Specifications subject to change without notice. Go to
Accessories:
PC Software
Manual
Power Cord
USB Cable
Calibration
Adaptors
globalspecialties.com for the latest update.