Global Specialties DL-020 User Manual

62-page professionally written lab manual
12 hands-on labs correlated to any textbook for a
Attractive and easy to use system draws students
Expandable breadboard allows the system to grow
visualize graphic form.
DL-020 Sequential Logic Trainer
Features:
Innovative Training Solutions globalspecialties.com
Embedded Systems Design Series
Digital Logic Trainers
Some of the logic circuits that can be implemented with this trainer include:
SR latch
D latch with and without enable
D flip-flop with and without enable
SR flip-flop
JK flip-flop
T flip-flop
4-bit register
Serial-to-parallel shift register
4-bit up counter
4-bit up/down counter
Finite state machine (FSM)
Rotating lights controller
Car security system controller
Jeopardy® contestant response controller
Traffic light controller
Other custom controllers
Global Specialties’ DL-020 is the second model in its series of embedded systems design trainers. The DL-020 teaches students the advanced concepts of sequential digital logic design, which is an essential step towards understanding microprocessor and microcontroller logic.
With the DL- 020, all necessary logic components are included and pre- mounted for fast, easy implementation of sequential circuits that are used as the building blocks of microprocessors. These sequential circuits include the SR latch, D latch, register, memory, finite state machine (FSM), and several real- life controller examples.
Global Specialties’ logic trainer simplifies the teaching process by eliminating the need to discretely wire IC’s as all gate elements are pre-mounted, de-coupled and de-bounced, ready for immediate classroom use. Students can spend their time directly on logic training.
Most importantly, the trainer includes a 62­page professionally written training manual featuring an overview of sequential digital logic and 12 corresponding hands- on labs enhancing any textbook currently in use.
The DL-020 is a complete and ruggedly packed trainer that will provide a solid learning platform to individuals and classroom students.
authored by university professor, Enoch Hwang, PhD.
iPad version of lab manual available on iTunes
digital logic course.
entire lab lightweight and portable.
in to the beauty of digital logic and embedded systems design.
Complete kit with 9V wall adapter and 100
machined pin hookup wires. No need to buy anything else.
All gate elements are pre-mounted and fully
integrated.
as students' knowledge increases.
Perform experiments using standard TTL logic.
Well regulated 5V power (Vcc) and ground (GND)
points.
Commonly referenced truth table chart inside the
case lid.
High quality machined sockets for input and
output interconnections.
Each gate element is presented in its easy to
Model DL-020
Clock
Switch
between 1Hz
and 20Hz
NOT gate
12
2-Input AND gate
12
4-Input AND gate
8
2-Input OR gate
8
4-Input OR gate
8
2-Input XOR gate
12
2-Input NAND gate
8
D Flip-flop
4
4-to-1 Multiplexer
4
LEDs
8
7-Segment LED display
1
Slide switch
8
Push Button switch
3
270 tie point Bread Board
Yes
Vcc & GND tie points
Yes
Hook up wire 100pcs
Yes
9V wall adaptor
yes
Regulated 5V supply
yes
DL-020 Manual
Yes
Width
13.5 in
Length
8.5 in
Height
3.5 in
Weight
3.40 lbs
Analog & Digital Design Workstation
Innovative Training Solutions globalspecialties.com
©2012 Global Specialties 22820 Savi Ranch Parkway Yorba Linda, CA 92887 1-800-572-1028
Embedded Systems Design Series
Digital Logic Trainers
Specifications
Training Manual
Chapter 1:
Trainer
Chapter 2:
Combinational and Sequential Circuit
Chapter 3:
Chapter 4:
Sequential
Logic Trainer
DL-020
Sequential Logic Design
Model DL-020
Microprocessors
Introduction to Microprocessors
Analogy
Sequential Logic Circuits Identifying Sequential Circuits Analysis of Sequential Circuits Finite State Machines Synthesis of Sequential Circuits
Labs The NAND gate SR Latch D Latch D Latch with Enable D Flip-Flop D Flip-Flop with Enable Register Binary Up Counter Car Security System Version 2 Rotating Lights Controller Jeopardy® Contestant Response Controller Traffic Light Controller
Loading...