![](/html/c8/c89c/c89c43fa0322fb19aa605d8cfc3add2fcf3be5d3b8c1aa58f3f26fe592973d7d/bg1.png)
Features:
• Variable isolated AC output from 0-150 VAC
•
• Two parallel three-prong AC outlets allow the
The 1507 is designed to provide
isolated AC output variable from 0 to
approximately 150 volts. It can supply a
continuous 10 amp output current to a
maximum of 1300 VA. The output
current can be set to the maximum
output desired, at which point a latching
relay will open the circuit and reduce
output volts and amps to zero. Two
parallel, three-prong AC sockets are
provided to allow the operator to use
the unit for more than one load.
The 1507 also includes a leakage tester
that can measure AC leakage current in
electrical/electronic equipment in order
to verify if the leakage is within limits
established by UL, CSA, etc.
Variable AC Power Supply 0-150 VAC, 10 A
perfect for:
Educational
instruction
Industrial
prototyping
Dual loads
Continuous 10 amp output current to a
maximum of 1300 VA
Variable current adjust
unit to be used for more than one load
Two 3.5” high analog meters. One monitors
AC line or output voltage and the other
displays output current or leakage
Leakage indicator and reset switch
Audible alarm to warn of “HOT” chassis or
shorts on equipment under test
Output overload indicator
AC input fuse protected
![](/html/c8/c89c/c89c43fa0322fb19aa605d8cfc3add2fcf3be5d3b8c1aa58f3f26fe592973d7d/bg2.png)
Output Isolated Voltage (115VAC
input)
±3% of full scale on Voltage
±2% of full scale on Current
±2% of full scale on Leakage
Adjustable current relay with manual
reset
1507 Variable AC Power Supply 0-150 VAC, 10 A
© 2013 Global Specialties V20140122 22820 Savi Ranch Parkway Yorba Linda, CA 92887 1.800.572.1028
Specifications subject to change without notice. Go to globalspecialties.com for the latest update.
with the following
items:
Leakage probe
Manual