Global Specialties 1305 User Manual
INSTRUMENTS
The 1305 DC Power Supply is a compact, high performance Dual output DC
power supply for industrial and laboratory use.
variable from 0 to 32V and can supply 5A max each. they can be operated in constant voltage or constant current
modes. Automatic transition from CV to CC mode may be set at any voltage or current within the range. Separate
front panel meters are provided to monitor output voltage and load current of the variable output sections.
The output voltage and current limit settings of the variable outputs can be varied manually using front panel controls.
All outputs are floating i.e., neither the output positive terminal nor the negative terminal (nor any point within the
regular circuitry) is connected to ground.
The two main outputs are continuously
▼
Two consistently variable
0-32VDC @ 0-5AMP
outputs with coarse
and fine adjust
Constant Voltage/
Constant Current
operation with Green
LED indicators
Automatic transition
from (CV) to (CC) mode
at any voltage or current
within the range
Separate front panel
3 digit Green LEDs to
monitor Voltage or
Current from each
output
Each output is isolated,
therefore series or
parallel operation is
possible and extends
the output capabilities
Model 1305
to either 0-64VDC
@ 5 AMPS or 0-32VDC
@ 10AMPS
Remote sensing available on each output
Automatic overload and
short circuit protection
115-120VAC @ 60Hz or
211-220VAC @ 50Hz
operation
▼
INSTRUMENTS
Two Identical Sections
Output Voltage 0-32VDC continuously variable
Load Current 0-5 A max. continuously variable
Constant Voltage Mode Operation
Line Regulation Less than ± 0.01% + 2mV
(±10% line change)
Load Regulation Less than ± 0.01% + 2mV
(no load to full load)
Ripple & Noise Less than 1mVrms max (20Hz-20MHz)
Constant Current Mode Operation
Line Regulation Less than ± 0.1% ± 250µA
(±10% line change)
Load Regulation Less than ± 0.1% + 250µA
(no load to full load)
Ripple & Noise 0.04% rms max (2.0mA)
Metering
Meter Accuracy ±3 counts
Overload Protection
General
Operating Temperature 0 to 40oC
Input Voltage 115V or 230VAC, 47 to 3Hz (with Internal Tap Selector)
Dimensions (WxDxH) 420mm x 300mm x 133mm
Weight 16.6Kg (36.88lbs) approx.
DISTRIBUTED BY:
Independent 3 digit DPMs for monitoring output voltage
and load current of each section
Automatic overload and short circuit protection
www.globalspecialties.com
Ordering
Information
Model 1305
P/N 105-1305
1486 Highland Ave.,Unit 2,
Cheshire, CT 06410
TEL: (800) 572-1028
FAX (203) 272-4330
www.globalspecialties.com
5/02 ©2002 Interplex Electronics
• Specifications subject to change
without notice.
Loading...