Global Specialities PRO-57 Operating Instructions Manual

PRO-57
Tweezer Digital Multimeter
OPERATING INSTRUCTIONS
SAFETY INFORMATION
EMC: Conforms to EN61326-1.
The following safety information must be observed to insure maximum personal safety during the operation of this meter:
Use the meter only as specified in this manual or the protection provided by the meter might be impaired.
Do not use the meter if the meter or test leads look damaged, or if you suspect that the meter is not operating properly.
Never ground yourself when taking electrical measurements. Do not touch exposed metal pipes, outlets, fixtures, etc., which might be at ground potential. Keep your body isolated from ground by using dry clothing, rubber shoes, rubber mats, or any approved insulating material.
Turn off power to the circuit under test before cutting, unsoldering, or breaking the circuit. Small amounts of current can be dangerous.
When using the probes, keep your fingers behind the finger guards on the probes.
Measuring voltage which exceeds the limits of the multimeter may damage the meter and expose the operator to a shock hazard. Always recognize the meter voltage limits as stated on the front of the meter.
SPECIFICATIONS
Display: 3000 counts. Polarity: Automatic, ( - ) negative polarity
indication.
Overrange: " OL " mark indication. Low battery indication:
The " " is displayed when the battery
voltage drops below the operating level. Measurement rate: 4 times per second, nominal.
Auto power off: approx. 10 minutes. Operating environment:
0 to 40 ( 32 104 ) at < 70% R.H.
Storage temperature:
-20 to 60 ( -4 to 140 ) at < 80% R.H.
with battery removed from meter.
Temperature Coefficient:
0.1 x ( specified accuracy ) per . ( 0 to
18, 28to 40℃ ).
Power: 3.0V button-type lithium battery x1,
CR2032.
Battery life: 100 hours continuous operation. Dimensions:
205mm (H) X 40mm (W) X 24.5mm (D). Weight: Approx. 3.5 oz. ( 100g ) including battery .
(Accuracy at 23
℃±5 ℃
, <70% R.H.)
Loading...
+ 7 hidden pages