VOLTS:
120
AMPS:
14.2
WATTS:
1700
GS1010
USER MANUAL
FEATURES:
• Opening: 2⅞” x 17½”
• Removable clean out tray
• Mechanical 15 minute timer with “HOLD” option
• Variable control thermostat from 100°F to 675°F
• Attractive stainless steel outer housing
• Insulated
• Long life calrod heating elements.
• Flip up handle design for easier storage
• Use with model GS1410 on top for a great space
saving feature
ELECTRICAL DATA:
• Best when operated on an individual branch circuit
• 5’ power cord length
DIMENSIONS:
• Outside: 23⅝”W × 19½”D × 10¼”H
• Grill/Rack: 17”W × 17”D
SHIPPING INFORMATION:
• : × SHIPPING DIMENSIONS 23”W 27”D × 12”H
• : lbs.SHIPPING WEIGHT 41
301 Meuse Argonne Hicksville, OH 43526 • P:800.782.6761 • F:419.542.6690
Visit us at www.nemcofoodequip.com for more information
FP140202 REV: ORIG
IMPORTANT: Read the following safety and operation instructions to avoid injury and to avoid damage to equipment or property.
Plug unit into a properly grounded electrical outlet of the correct voltage, size, and plug configuration for
this unit. We recommend usage on an individual branch circuit of at least 15 amps for best results. Failure to
do so may result in decreased performance of the oven.
The oven should never be operated on or near combustible materials. Caution should be taken because of
the hot surfaces attained during use. We recommend a 6" spacing from walls.
Exterior surfaces on unit may get hot. Use caution when touching these areas to avoid injury.
Improper assembly of the “flip-up” handle to the grill could cause the grill to rotate. This may result in food
falling off the grill. Injury to the individual could occur if attempting to catch falling food. See proper
handle assembly instructions included in this instruction manual.
When removing grill from oven, use caution to avoid hot food falling into the oven, on the operator, etc.
Unplug oven when not in use.
CLEANING INSTRUCTIONS
Unit is not waterproof. Do not submerge in water. Do not operate if unit has been submerged in water.
Unplug unit from power source, and allow to cool completely before performing any maintenance or cleaning.
These ovens are designed with a clean-out tray which should be pulled out and cleaned often with warm
soapy water and then dried thoroughly. Most of the spillage will fall directly on this tray, and if this is
cleaned off and not allowed to build up, the internal parts of the oven will stay relatively clean.
Additionally, proper cleaning prevents emergence of smoke caused by a build up of carbon. The outside of
the oven may be cleaned with a soft rag and stainless steel cleaner. As with all metals, there could be some
sharp edges, and caution should be used when cleaning.
DO NOT USE ANY OVEN/RANGE CLEANERS ON THIS UNIT.
AVOID USING ABRASIVE SCOURING PADS AS SOME MAY CAUSE SCRATCH MARKS ON UNIT.
301 Meuse Argonne Hicksville, OH 43526 • P:800.782.6761 • F:419.542.6690
Visit us at www.nemcofoodequip.com for more information
OPERATION:
OPERATION:
ASSEMBLING COMPONENT PARTS
Included with your oven is a plastic bag containing the grill handle, clean-out tray knob and appropriate
screws and nuts. See the instruction sheet for assembling the flip up handle and clean-out tray.
BAKING INSTRUCTIONS
Oven can be turned on just prior to placing the pizza into the oven. After placing the pizza in the oven, set
the timer dial to the desired bake time.
Baking time varies depending upon the type of pizza crust, thickness of pizza crust, amount of toppings,
personal preference to doneness, etc. Baking times will also vary based upon whether pizza is frozen or
thawed.
• Thicker crust pizzas require lower baking temperatures for a longer period of time in order to penetrate
and bake crust. SUGGESTED baking temperature: 400°F.
• SUGGESTED baking temperature for par-baked thin crust pizza: 450°F.
It is recommended that the drawer be opened halfway through baking time to check progress. It may be
necessary to rotate pizza at this time.
“HOLD” FEATURE
This oven has the ability to remain on for continuous operation. To activate this feature turn the timer dial
counterclockwise.
CAUTION: When oven is not in use, be sure to turn “hold” feature off, and unplug the unit.
NOTES:
301 Meuse Argonne Hicksville, OH 43526 • P:800.782.6761 • F:419.542.6690
Visit us at www.nemcofoodequip.com for more information
Pizza Oven Handle Assembly Instructions
If your grill differs in size or shape, the assembly process will remain the same.
Slide the Grill Front over the Grill Loop allowing it to lay flat
1
Place the Handle Bracket over the Grill Loop
2
Insert the Screw through the Grill Loop,
4
the Handle Bracket, and the Grill Front
Rotate the Grill Front and Handle upright
3
Thread and tighten the Thumb Nut onto the Screw
5
FS140096 R EV: ORIG
GS1010 Exploded View
REV: 07/25/2013
15
REV: 07/25/2013
7
10
17
6
16
GS1010 Wiring Diagram
11
2
1
PARTS LIST:
GS1010
ITEM # PART # DESCRIPTION
1 10025 POWER CORD
2 10029 STRAIN RELIEF
3 10013 LOOPED GRILL
4 10007 CLEAN OUT TRAY
5 10006 GRILL FRONT
6 10009 HEATING ELEMENT (900W)
7 10008 HEATING ELEMENT (800W)
8 10095 BAG OF PARTS (Incl. Handle, nut, screw & clean out tray knob & screw)
9 10012 TIMER and/or TEMPERATURE KNOB
10 10014 RED PILOT LIGHT
11 10010 HI-LIMIT THERMOSTAT
12 10112 BULB GUARD
13 10143 TEMPERATURE DECAL
14 10142 TIMER DECAL
15 10011 REGULATING THERMOSTAT
16 10134 TIMER SERVICE KIT
17 10136 RELAY SERVICE KIT
18 10129 BOTTOM FOOT SERVICE KIT
301 Meuse Argonne Hicksville, OH 43526 • P:800.782.6761 • F:419.542.6690
Visit us at www.nemcofoodequip.com for more information
PRODUCT WARRANTY
nemco
Except as otherwise provided below, Nemco Food Equipment, Ltd. (“Nemco”) warrants, to the original user, its electrical/pneumatic products (other
than blades and light bulbs) to be free of electrical and mechanical defects in material and workmanship under “normal use” (defined below) for the
shorter of the following periods: (a) one (1) year from the date placed in service by the original user, or (b) 18 months from the date of shipment from its
factory. Nemco also warrants its food preparation products (other than blades) to be free of mechanical defects in material and workmanship under
normal use for two (2) years from the date placed in service by the original user. In addition, Nemco warrants its Global Solutions food preparation
and electrical products (other than blades) to be free of mechanical defects in material and workmanship under normal use for one (1) year from the
date placed in service by the original user. The warranty provided for herein shall be limited to parts and labor. Any determination that a product is
defective or covered by this warranty, shall be made by Nemco, in its sole discretion. The determination of whether to repair or replace a defective,
covered product, or to refund the purchase price for the product, will be at Nemco’s sole discretion. This warranty does not cover products used
outside the United States, or damages caused by accident, misuse, negligence of any person other than Nemco, current or voltage other than stated
on the appliance, fire, flood or other casualty. Any alteration to the product or unauthorized repair voids this warranty. For purposes of this warranty,
the phrase, “normal use” shall mean the use of the product in connection with food in accordance with the product manual accompanying the product.
Nemco shall be responsible only for repairs or replacements of defective parts performed by Nemco’s authorized service personnel. Authorized
service agencies are located in principal cities throughout the continental United States, Alaska and Hawaii.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NEMCO EXPRESSLY DISCLAIMS
ANY IMPLIED WARRANTY THAT ANY OF ITS PRODUCTS IS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR DOES NOT INFRINGE ON THE
RIGHTS OF ANY THIRD PARTY. THE FOREGOING WARRANTY SHALL BE NEMCO’S SOLE AND EXCLUSIVE OBLIGATION. ANY PERSON’S (BUYER, USER
If
OR OTHERWISE) EXCLUSIVE REMEDY AGAINST NEMCO, AND NEMCO’S SOLE OBLIGATION, FOR ANY AND ALL CLAIMS, WHETHER FOR BREACH
OF CONTRACT, WARRANTY, TORT (INCLUDING WITHOUT LIMITATION NEGLIGENCE), OR OTHERWISE, SHALL BE LIMITED TO NEMCO REPAIRING
OR REPLACING THE PRODUCT, OR, AT NEMCO’S OPTION, REFUNDING THE PURCHASE PRICE THEREFOR. IN NO EVENT SHALL NEMCO HAVE ANY
LIABILITY FOR DAMAGES IN AN AMOUNT EXCEEDING THE PURCHASE PRICE OF THE PRODUCT, NOR SHALL NEMCO HAVE ANY LIABILITY FOR
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES. Any person desiring to make any claim against Nemco must do so within six (6) months after
expiration of the applicable warranty period, or such claim shall be forever barred.
NOTE: WARRANTY DOES NOT COVER DAMAGE TO THE GRID OR GRID COATING. IT IS NEMCO’S SOLE DISCRETION TO DETERMINE IF A GRID OR
GRID COATING CLAIM IS WARRANTED.
NOTE: WARRANTY DOES NOT COVER DAMAGE TO THE ROLLERS OR ROLLER COATING. IT IS NEMCO’S SOLE DISCRETION TO DETERMINE IF A
ROLLER OR ROLLER COATING CLAIM IS WARRANTED.
NOTE: PLEASE REVIEW YOUR PRODUCT MANUAL FOR SPECIFIC WATER REQUIREMENTS. DISTILLED OR TREATED WATER MAY BE REQUIRED.
PRODUCT FAILURE DUE TO SEDIMENT AND LIME BUILDUP IS NOT COVERED UNDER WARRANTY.
PRODUCT SERVICE
Nemco has a staffed service department, and we believe prompt service is extremely important to our customers. Therefore, we request all product
service inquiries be handled in the following manner:
(1) The end user should call Nemco Customer Service with the company name, address, phone number, model number, serial number
(if applicable), Nemco Sales Order number or Dealer Purchase Order number and the nature of the problem (the “Claim Information”).
(2) The Nemco Customer Service Department will decide on the most appropriate course of action. If Nemco determines that it must inspect a
product, the following procedure will be followed:
The end user will obtain a Return Goods Authorization number from Nemco Customer Service to return the product to Nemco for inspection.
Please be sure to use this number on the box and on paperwork sent with the unit. Return the unit to Nemco. The Nemco Service Department
will determine if the problem is covered by the foregoing warranty. If so, Nemco will repair the unit and return it to the end user. If the unit is
determined not to be covered by the foregoing warranty, the dealer will be contacted to determine the next course of action. If the unit weighs
less than 70 lbs., it will be considered a carry-in warranty. The service agent performing the service must call Nemco Customer Service to obtain
a Service Authorization number and provide the Claim Information. If the unit weighs 70 lbs. or more, it will be considered an on-site warranty,
•
•
•
•
•
•
•
•
•
•
•
and the service agent performing the service must call Nemco Customer Service to obtain a Service Authorization number and provide the Claim
Information.
TERMS & CONDITIONS
• No merchandise shall be returned without prior written authorization.
• All returned merchandise must be unused, in original carton and shipped prepaid.
• All returned merchandise is subject to a 25% restocking charge.
• No returns will be accepted after 90 days of shipping date.
• Purchaser should make claim directly to carrier for any damages to merchandise
• This Price List supersedes all previous price lists.
• Orders with an invoice value of $2,100 net or more will be shipped freight prepaid
• Terms are COD, CIA or Net 30 days with approved credit.
• Buyer shall pay all applicable federal, state and municipal sales or use tax.
• No minimum order charge.
• Prices subject to change without notification.
P
that occur in transit.
to one destination in the continental United States.
FOOD
®
EQUIPMENT
Loading...