GlobalSat WorldCom BT359 User Manual

User Manual

Bluetooth GPS Receiver

BT-359

Ver 1.0

1

1. BT-359 at a glance

1.1 Appearance and Function

1.2 How to change battery

1. Bluetooth Status LED

2. GPS Status LED

3. Power LED

4. Power Button

a. Slide Battery Cover to the un-lock position.
b. Slightly lift cover (at latch end) and then slide the battery cover back to expose and remove the

battery.

c. Insert new battery with face-down to align with contact pins.
d. Replace battery cover and put the battery cover lock into the locked position.

2

1.3 Accessories

BT-359

Car charger

Travel charge adapter (optional)

3

2. Introduction

The BT-359 is a GPS receiver with Bluetooth interface and built-in active antenna

for high sensitivity to tracking signal. Based on the SiRF star III Low power chip set
and supports all functions (Single Sat updates in reduced visibility, Superior urban
canyon performance, FoliageLock for weak signal tracking, etc.). The BT-359 is well
suited to system integrations including PDA, Smart phone, Tablet PC and Notebook
PC with Bluetooth devices. It satisfies a wide variety of applications that are
purposes in automotive and outdoor recreation navigation systems.

2.1 Package

Before you start up, make sure that your package includes following items. If any
item is missing or damaged, please contact your dealer immediately.

 Bluetooth GPS Receiver
 A CD with the User Manual and the Testing Program.
 AC Power Charger (optional)
 DC Car Power Charger

2.2 Power Switch

Power on:

Press the power button 1 second until the GPS status LED is on.

Power off:

Press the power button 1 second until the GPS status LED is off.

2.3 LED Function

Bluetooth Status LED (Blue):
Blinking (Slowly) ---- Not connected to any Bluetooth device.
Blinking (Quickly) ---- Connected to other Bluetooth device.

GPS Status LED (Green):
Blinking ---- GPS position is not fixed

Steady light ---- GPS position is fixed

Battery Status LED (Red/Yellow):

Red ---- Battery power is critically low. Charge it immediately.
Yellow ---- Battery is charging now.
LED off ---- Battery is partially full or fully charged.

2.4 Power-saving Function

When you start the power of the Bluetooth GPS Receiver BT-359, if the Bluetooth is
not connected to any devices within 10 minutes, BT-359 will turn off the power
automatically, and all the LED will go off simultaneously.

4