GTV-580
Quick Start Guide
Version1.1
Accessories
GTV-580 Main Unit
DC charger
Mount
AC adapter
USB cable
DVB-T
Antenna(Reference)
Remote control
2
SD card (optional)
DVB-T module
CD or DVD (user
Quick Guide
manual, driver,
Application, map
AV-OUT cable
data…)
SD PULL Label
Note:
1. If any item is missing or damaged, please contact with your local retailer.
2. Fittings graphic presentation can as material object slightly the getting
more different, please by fittings not enclosed not real as the accurate.
3
Overview
➊
➋
➌
➍
➎
Front View
Solid Red – Battery is lower than 40%.
Power LED
Volume up Volume up button.
Menu button
Volume down Volume down button.
Microphone
Solid Amber – Battery is being charged.
Solid Green – Battery full charged.
Press the Menu button to go directly to Main
Menu of the application.
Microphone is enabled when you connect
GTV-580 with your Bluetooth cell phone.
4
Side View and Top View
➊
➋
➌
➍
➎
➏
Power /Mute
button
Clip groove For the cradle to clip tight to the main unit.
SD card slot
Earphone
jack
Mini USB port
Reset button
Power (Long Push>2 sec):
Turn on the GTV-580, press it again to turn it
off (enter the standby mode).
Mute (Short Push<2 sec):
Press to mute the audio, press again to
resume.
The Navigation software, map data and other
media files can be stored in the SD card.
Plug the earphone or headset to the socket,
you can listen to the navigation voice guide o r
enjoy your favorite music.
Connect the GTV-580 to PC via an USB cable
for data transfer.
Use the stylus tip to press down the reset
button through the hole to reset the system.
5
Bottom View and Rear View
g
➊
➋
➌
External
Antenna
connector
Speaker For output the music or navigation voice.
Battery
Slide
Switch
For you to connect an optional MMCX-type
external antenna.
Slide the switch to “OFF” position to prevent
from accidentally turning on the device by
touching the power butt on. If you want to use
this device, be sure to slide the switch to the
“ON” position.
L The purpose of the Battery Slide Switch is
to cut off power to the unit. It is used to disable
the unit in transit from the factory an d if the
unit will be in stora
Be sure that the switch is in the “ON” position
when you remove the unit from the box. The
GTV-580 will NOT charge if the switch is in the
“OFF” position.
e for long periods of time.
6
➍
➎
Charging
For power supply and battery charging.
connector
Docking
Docking connector for DVB-T module.
connector
DVB-T module
➊
➋
➌
➍
➎
➏
➐
DVB-T
Antenna
connector
Charging
connector
Infrared
sensor
Docking
connector
Clip hook For clip into the groove of the main unit.
DVB-T LED
AV-OUT
For you to connect to DVB-T antenna. (on
both sides)
For power supply and battery charging.
Infrared sensor for receiving signal from
remote control.
Docking connector for DVB-T module.
The blue LED will light when DVB-T fu nction
is operating.
Plug the AV cable into the socket, you can
output the DTV displaying to the external
monitor when you watch DTV.
7
Before you start to use the GTV-580, please connect it with the AC
adapter and plug to power socket for battery charging. When it is
in charging, the status indicator will be amber. If the battery is
fully charged, the status indicator will be lit on green.
Download Application Software to memory
card by card reader
Insert the SD card into your card reader which is con nected to your
PC. Insert the CD/DVD into the CD/DVD-ROM drive; the ins tallation
program will automatically start. (If your autorun feature is
disabled, please manually execute this program by double click the
"auto.exe" from the root directory of CD/DVD.) Click “Make
System Disk” button for downloading the application and map into
SD card.
Click on the drive letter which your SD card is in serted, and click on
“Start” button. After the download process is finished, please
remove the SD card from card reader, insert it into your GTV-580
and restart it.
8
Attach GTV-580 to Cradle (DVB-T module)
Release
Lock
1. Place the GTV-580 at a downward angle into the base of the
cradle.
2. Align three grooves and docking connector to push down
GTV-580 inward until the top clip locks into place.
3. Clean windshield glass thoroughly with glass cleaner.
4. Moisten suction cup and attach mount to the windshield.
5. Lock mount lever by moving forward.
z To release, bring lever back an d pull on the suction cup’s clear
tab to release suction. Never pull on mounting arm to r emove
from glass.
z It is suggested that you attach the mount in the appropriate
place in your car. Do not mount in front of an airbag panel, or
block the driver's vision.
9
Charging your GTV-580
Plug the end of AC adapter or DC charger into the charging
connector of GTV-580 or DVB-T module. The power LED will light.
When battery is fully charged, the LED becomes green.
SD card sticker
Pastes SD PULL LABEL on the SD CARD.
So then may in GTV-580 take out SD CARD
by the arrow direct ion.
10
Application Main Screen
Main Screen
Tap on the Navigation icon to start the Navigation
application.
Tap on the TV icon to start the DVBT function.
Tap on the HandsFree icon to start the Bluetooth
HandsFree application.
Tap on the Media icon to enter the sub-screen which
contains the music player and photo viewer.
Tap on the Setup icon to enter the sub-screen which
you can do the settings of the device.
Tap this icon to set the date and time.
Tap on the battery icon on top right corner of screen;
it enters the power setting screen.
11
Loading...