Appendix 1:Wor ld Time Z on e Table .............................18
Page 3
3
Chapter 1:Functions and Specifications
Function and Features
Can set 5 Destination Points
Display directions with Digital Arrow Display (Can display 16 directions)
Magnetic North Direction Indication; prese nt c oor dinates display
Manual Setting of Destination Coordinates
Maximum Destination Distance Showing (0~999.99)
GPS fix status indication
3 Kinds of Distance Unit: km/mi/nm for setting
Time Zone Setting/ Date and time display
End User changeable Battery Design: AAA x 2, Rechargeable Batt e r y /General
Battery / Alkaline Battery
Alkaline battery life can last for 18 hours. The battery life can be lengthened
under power-saving mode.
Simple function of buttons
Battery Power Level Indication
Backlight T i me Setting
Power-saving mode setting
Time Accuracy 1 micro-second sy nc hr oni z ed to GPS ti me
Temperature
Operation
0°C ~ 50°C
Temperature
Storage
-20°C ~ 70°C
Temperature
Humidity Range Operational up to 95% non-condensing
Certification
FCC USA (Covers requirements for CANADA ICES-003)
CE Europe
TAIWAN BSMI
Page 6
6
Front view and Back view
Shows the GPS fix status, power level, destination direction
and distance
Battery Cover
Open the ba ttery cover by rotating it according to the arrow.
2. Return to last page under each setting screen.
same time.
Accessories
Hang tape
CD
YE-GD101 Main
Unit
Quick Guide
NOTE:
If any accessory is not included or damaged, please contact the local dealer.
Appearance
➊
Display
➋
Short-click (1sec): Turn on backlight.
Power/Backlight
➌
Button
Long-click (2sec):
1. Power off device under main screen.
Short-click (1sec): T o select.
Selection/
➍
Setting Button
Long-click (2sec): To set.
Make YE-GD101 enter main screen by long clicking
Power/Backlight Button and Selection/ Setting Button at the
Page 7
7
on the triangle mark position,
when the battery cover marked
accordance with the battery
direction of the
arrow for rotation in the
opposite direction, then can
in accordance with
the battery rotation direction of
the arrow to open the battery
Chapter 2:Start to Use
Install Battery
Close the battery cover
YE-GD101 in the battery cover
with the YE-GD101 Charm-hole
mark at the bottom, and then in
YE-GD101
close the battery cover.
Magnetic North Adjustment
1. When using YE-GD101 for the first time,
YE-GD101 will automatically perform the
magnetic-north adjustment as seen in the
screenshot below.
2. For the method of adjustment, please refer to
Open the battery cover
YE-GD101
cover and put in the battery.
Chapter 3-2.
3. If YE-GD101 shows the incorrect or inaccurate
direction, please perform the magnetic
adjustment by operating the function button.
Page 8
8
ts a
on will only be
Chapter 3:Using YE-GD101
3-1 Direction Indication Screen
Indication Description
The GPS fix indication will keep ON when device ge
GPS fix. GPS fix indicat or will flash when device does not have
GPS fix.
The distance between YE-GD101 and destinati
shown/ displayed when device has GPS fix.
The direction of the setting destination of YE-GD101 . The arrow
will direct to t he desti nati on a f ter YE-GD101 has GPS fix an d has
performed the magnetic-north adjustm ent.
What is shown on upper right corner is the battery power level
75%~100%
50%~75%
25%~50%
Battery Low. Please change the batteries
Page 9
9
Under direction indication screen, click Selection/
and set the following 5
o the direction
3-1-1 Automatic Setting the Destina ti on
1.
Setting button to select
destination’s coordinates.
Description
2. After YE-GD101 has GPS fix, long click Se lection/
Setting button will save the present coordinates as
the selected destination’s coordinates.
While YE-GD101 is saving coordinates, YE-GD101 will
display as seen in the screen sho t to the left and then
return to the direction indication screen.
If you try to s av e the present coordinates under no GPS
fix status, YE-GD101 will display as seen in the
screenshot to the left and then return t
indication screen.
Page 10
10
You could set the following 5 destination’s
3-2 Main Setting Screen
In the direction indication screen, you could make YE-GD101 enter main screen by
long clicking Power/Backlight Button and Selection/ Setting Button at the same time.
Screen and Operation Explanation:
Indication Function Operation
Long click Selection/Setting button to enter setting
screen.
Manual Set
Destination’s
Coordinate
Function
Setting
coordinates.
Long click Selection/Setting button to enter setting
screen.
You could set the following items.
Time Zone Distance Unit
Backlight Setting
Automatic Sleeping Time
Long click Selection/Setting button to enter setting
screen.
You could set the following items.
Data Setting
Date GPS Cold Start
Delete Memory
Page 11
11
icon
Explanation
Set My Favorite’s coordinates. The indication
will be ON when the destination’s
The upper left corner is the selected destination.
(East or
. An ar row w ill be i ndicat ed t o the numb er o n
Selection/Setting button to select the
Selection/Setting button to
The upper left corner is the selected destination.
The number is the setting longitude (North or
South). An arrow will be indicated to the number
n/Setting button to select the
Selection/Setting button to
3-2-1 Manual Setting Destination’s Coordinate
Set Home’s coordinates. The indication
will be ON when th e d estination’s coordinates
are set.
Set Building’s coordinates. The indication
will be ON when th e d estination’s coordinates
are set.
Set Car’s coordinates. The indication will
be ON when the desti nati on’ s c oordi nates ar e
set.
Set Travel’s coordinates. The indication
will be ON when th e d estination’s coordinates
are set.
Setting Destination’s Longitude
1.
The number is the setting longitude
West)
the initial screen.
2. Short click
number. Long click
enter the selected v alue and move to t he next di git
for setting.
3. The maximu m setting is 180 ° 00 ’00 . 00 ”
Setting Destination’s Latitude
1.
coordinates are set.
2. Short click Selectio
3. The maximum setting is 90 ° 00 ’00 . 00 ”
on the initial screen.
number. Long click
enter the selected v alue and move to t he next di git
for setting.
Page 12
12
, KM,
Set the automatic sleeping time for
You could set time zone in this screen. The value
Selection/Setting button to select the
save the
ct the unit of displayed distance in
Selection/Setting button to select the
3-2-2 Function Setting
Icon Explanation
Set User’s Time Zone
Select the unit of displayed distance
mile, and nm.
Set backlight time out
power-saving
Setting Time Zone
1.
on the lower screen represents the GMT time.
2. Short click
time zone.
3. Long click Selection/Setting button to
time zone.
4. Long click Power button to return to last screen.
Setting Unit of Displayed Distance
1. You could sele
this screen. The default setting is km.
2. Short click
Explanation
Explanation
3. Long click Selection/Setting button to save the
4. Long click Power button to return to last screen.
unit.
unit.
Page 13
13
Explanation
Selection/Setting button to save the
me for going to sleep mode in
this screen. The value in the lower screen
Setting Backlight Timeout-time
1. Set the backlight timeout-time in this sc reen. The
value in the lower screen is the backlight time-out
time. The backlight will be on for the time-out time
afteryou short click the power/backlight button.
2. Short click Selection/Setting button to select the
backlight timeout.
3. Long click
backlight timeout
4. Long click Power button to return to last screen.
Set Idle-timeout Time for Going to Sleep Mode
Explanation
1. Set idle-timeout ti
represents the idle-timeout time.
2. Short click Selection/Setting button to select
idle-timeout-time.
3. Long click Selection/Setting button to save
idle-timeout-time.
4. Long click Power button to return to last screen.
Page 14
14
Display the present time of the set time
Explanation
Explanation
3-2-3 Setting Data
Icon Explanation
zone.
Make YE-GD101 do cold start。
Delete the setting coordinate of destination
in YE-GD101
Showing Date and Time
Cold Start
1. The displayed date and ti me is from satel lite dat a.
It is not user-defined.
2. Long click Power button to return to last screen.
3. Long click Selection/Setting button to go to main
screen.
1. This screen shows YE-GD101 is performing a
GPS Cold Start
2. It will return to navigation screen after 1 second.
Page 15
15
Explanation
is deleting the
Deleting Coordinates of Destination Screen
1. This screen shows YE-GD101
coordinates of the desti nati on .
2. It will return to navigation screen after 1 second.
Page 16
16
will display the magnetic northern
after entering the adjusting electronic
will show the coordinates after
You could adjust electronic compass in this
for the correction
, please enter the
Long click
it will host in accordance with
2 complete
Proposed to carry out this action in the outdoors,
direction navigation screen, long click
will be turned off 2 seconds after
3-3 Adjusting E-Compass
1. YE-GD101
direction
compass mode.
2. YE-GD101
getting a GPS fix.
Adjusting the Electronic Compass
1.
screen.
Explanation
2. If you need to YE-GD101
magnetic north directions
magnetic north indicates,
Selection/Setting,
the flat and turn clockwise circle 1correction.
3.
to avoid interference with magnetic anomalies.
4. YE-GD101 will automatically return to navigation
screen.
3-4 Turning Off YE-GD101
1. In the
power button to turn off YE-GD101 .
2. YE-GD101
Explanation
seeing this screen.
Page 17
17
is moving.
away from excessive moisture and extreme
it in the closed vehicles or put it under
direct sunlight for extended periods of time. Excessive moisture and
If the date and time is not correct, please select the local time zone in
near the magnetic objects like electric
appliances or magnets. The magnetic objects may cause the
Chapter 4: Troubleshooting
When YE-GD101 can not be turned on or does not work properly,
please check if the battery is installed correctly.
It requires more time to get GPS fix while YE-GD101
Please keep YE-GD101 stationary when powering on YE-GD101 .
This will shorten the time to get a GPS fix.
Keep YE-GD101
temperatures. Do not leave
extreme temperatures may damage the YE-GD101 .
the time zone setting. Ie PST GMT -8 / Taiwan GMT +8
Do not put YE-GD101
YE-GD101 point to wrong direction.
If the pointed direction is not accurate, please adjusting the electronic
compass.
Page 18
18
Time Code
Description
Region
Time Zone
Appendix 1:World Time Zone Table
ACDT
ACST
ADT
AEDT
AEST
AKDT
AKST
AST
AWDT
AWST
BST
CDT
CDT
CEDT
CEST
CET
Australian Central Daylight Time Australia +10:30
Australian Central Sta ndar d Ti me Australia + 9:30
Atlantic Daylight Time North America - 3:00
Australian Eastern Daylight Time Australia + 11:00
Australian Easter n Sta ndar d Time Australia + 10:00
Alaska Daylight Time North America - 8:00
Alaska Standard Time North America - 9:00
Atlantic Standard Time North America - 4:00
Australian Western Daylight Time Australia + 9:00
Australian Western Standard Time Australia + 8:00
British Summer Time Europe + 1:00
Central Daylight Time Australia +10:30
Central Daylight Time North America - 5:00
Central European Daylight Time Europe + 2:00
Central European Sum mer Tim e Europe + 2:00
Central European Tim e Europe + 1:00
CST
CST
CST
CXT
EDT
EDT
EEDT
EEST
EET
EST
EST
EST
GMT
HAA
HAC
HADT
Central Summer Time Australia + 10:30
Central Standard Time Australia + 9:30
Central Standard Time North America - 6:00
Christmas Island Time Australia + 7:00
Eastern Daylight Time Australia + 11:00
Eastern Daylight Time North America - 4:00
Eastern European Daylight Time Europe + 3:00
Eastern European Summer Time Europe + 3:00
Eastern European Time Europe + 2:00
Eastern Summer Time Australia + 11:00
Eastern Standard Time Australia + 10:00
Eastern Standard Time North America - 5:00
Greenwich Mean Time Europe 0:00
Heure Avancée de l'Atlantique North America - 3:00
Heure Avancée du Centre North America - 5:00
Hawaii-Aleutian Daylight Time North America - 9:00
HAE
HAP
Heure Avancée de l'Est North Am erica - 4:00
Heure Avancée du Pacifique North America - 7:00
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.