Global Phoenix MID M1060W, M1060W User Manual

Tablet of Contents

Specifications………………………………………………………………….1
What‟s inside the box…………………………………………………………2
Tablet Parts……………………………………………………………………2
Getting started………………………………………………………………...2
Connection to Internet………………………………………………………..6
Task Bar………………………………………………………………………..8
Install and Uninstall……………………………………………………………9
Camera……………………………………………………………………….10
HDMI………………………………………………………………………….11
Trouble Shooting……………………………………………………………11

Specifications

Display: 10.1 inch 1024X600 Resolution Capacitive screen
CPU: Boxchip A10
RAM: 1GB DDR
Internal Storage: 4GB
Expansion Storage: USB & TF card(Micro SD card), 32GB Max.
Built-In Wireless: 802.11b/g Adapter
AC Adapter: DC 5V-2A
Operating System: Android 4.0
Battery: 5000mAh

What’s Inside The box

Tablet – 1pc
Power Adapter -1pc
User manual -1pc

1

Tablet Parts

1. Headset Port 7. Home button

2. HDMI Port 8. Camera

3. DC Jack 9. Power ON/OFF button

4. 5Pin USB Port 10. Volume

5. TF card slot(Micro SD card) 11. Volume

6. USB Port

2

123

46 7

859

10

11

8

Getting Started

Battery Charging

The tablet has a built-in rechargeable Li-polymer battery.

1. To charge connect the AC power adapter to the DC jack on the right
side of the tablet.

2. The LED indicator will illuminate to show the battery is charging. The
LED indicator will turn “OFF” when it‟s fully charged.

3. The tablet can be used even if the battery is being charged.

Power ON/OFF

ON:

1. Press and hold the power button until the tablet turns “ON”.

OFF:

1. Press and hold the power button until device optional

2. Select power off

3. Select OK to power off the tablet

Screen Lock/Unlock:
This feature locks the screen, at the same time turn OFF the screen‟s
backlight after a few seconds.
Screen locks when:

1. System is idle.

2. Manually activated by pressing the Power button once.

Soft Keyboard

The tablet has a soft keyboard which will automatically show up when
you tap the place on screen where text or number is to be entered.

3

USB Keyboard*

The unit support external USB keyboard to input text and number.
Some buttons on the unit and some function keys on keyboard may not
work if an external USB keyboard was connected.
*Note: The external USB keyboard is optional. If you use USB keyboard
case, do not to put the USB plug between the screen and the keyboard
when you close the case. It may damage the screen.

Touch Screen

The touch screen responds to finger touch.
Note: don‟t place any object on the touch screen for it may damage or
crush the screen.

Single Click: single click one icon to choose the icon or option you want.

Long Press: press and hold one icon to choose the icon and you can drag
it to the bottom shortcut bar.

Drag: drag on the screen and you can move between magic cube sides or
drag the application icons into the shortcut bar.

How to connect with computer

Note: First, the switch should put to „Device‟ status,
Before transporting documents, firstly you must set store mode for your
tablet.

1. Use USB cable to connect tablet with computer. Notice bar will appear
notice cue.

2. Press Menu button to pop up Menu option, and click on Notice.

3. In the notification panel, click on the USB connection, then click
Loading USB Storage Device.

4. Then the USB connection has been successfully.
4