Page 1
IP CABLING TRANSMISSION
ITEM NO.: IP03P POE Extender over Two Wire
IP03P POE Extender is designed to send and extend Ethernet network with POE can be
established using existing cables up to 500M. You can use a two-wire cable (UTP cable, coax
cable, telephone line, antenna cable, or bell wire) that is no longer in use to connect a
10/100Mbps POE device, IP telephone, PC…etc without having to lay any new cables.
Extended pass through POE to allow a single POE source, such as a POE network switch (IEEE
802.3af/at) to provide power to both TX/RX and the IP/POE camera use. It is perfect
solution for extended distance data and power transmission for warehouses, parking lots,
campuses, casinos and many more.
IP03P POE Extender over Two Wire
Extend Ethernet or any TCP/IP devices up to 1Km.
Ethernet and POE data over any two wire cable: UTP, Coax, telephone, bell, alarm, power
cables.
Data transfer distance up to 500M, data rate is up to 30Mbps based on distance.
Support 10/100 Mbps transmission rate.
Flexible power source either POE Switch or external DC power adapter option. (order
separately)
Provides pass-through POE up to IEEE802.3at 30W.
Support high power POE to PTZ cameras at long distances.
Connected devices are supplied with up to 7W via POE.
IP03P Power Source Option Model:
DC48V 40W power adapter: SWP480830R
DC56V 70W power adapter: SWP551260
POE Injector/POE Switch: IP05I, IP05H
High Power POE Injector/ POE Switch: IP06I, IP06H
Installation View:
1. Connect IP03PT, IP03PR with any two wire cable at both ends before powering.
2.Power input source could use POE Injector/Switch either optional DC 48V, DC56
power adapter to IP03PR unit and camera use.
IP03PT with POE switch power input to IP03R and POE camera
1
Page 2
IP03PT with DC 48/56V Power adapter power input to IP03R and POE camera
IP03PT with POE switch power input to IP03R and Non-POE IP camera.
IP03PT with DC 48/56V Power adapter power input to IP03R and Non-POE IP camera
Different Two Wire Cables distance :
Please note the cable quality, length and diameter of two wires used all have an influence
on the transfer of data and the POE output.
Coaxial cable
0.6 mm inner conductor
Data: 50 Mbps, Power: 13 W with 100 m
Data: 50 Mbps, Power: 11 W with 500 m
Data: 45 Mbps, Power: -
Telephone line/bell wire
0.8 mm
with 50 m Data: 50 Mbps, Power: 13 W with 100 m
Data: 50 Mbps, Power: 13 W with 200 m
Data: 50 Mbps, Power: 13 W
Installation cable
1.5 sqmm
with 50 m Data: 50 Mbps, Power: 13 W
with 100 m Data: 50 Mbps, Power: 13 W
with 200 m Data: 50 Mbps, Power: 13 W
Network cable
Cat-7
with 200 m Data: 50 Mbps, Power: 13 W
with 300 m Data: 50 Mbps, Power: 13 W
with 500 m Data: 45 Mbps, Power: 12 W
2
Page 3
Cable Define：
Data/Power +
Data/Power –
LED Indication：
Green ： Power on/off
Link Yellow ： Slow flash → under connection
On → Connection, but without data transmission
Quick flash → Connection and Data transmission
Ethernet Green ： ON → 10/100 Mbps connection
Flash → Data Transmission.
Ethernet Yellow ： No function
Caution:
Power output will be varied based on the power source input.
IP03PR power input with two selections, but one time only could use one input
★ Once choose power adapter power input, it cannot accept POE devices input.
IP03PT power output with two selections, but one time only could use one method.
★ Once choose DC 12V 1A power output, it cannot use POE output power supply.
Panel View:
IP03T
IP03R
3
Page 4
Specifications:
ITEM NO. IP03PT IP03PR
Data Input /Output 10/100 Base-TX RJ-45, Auto-negotiation/ auto-MDI/MDI-X
Power, Data
Input /Output
Two port terminal block
Distance Ethernet: 1000 Meters, POE: 500 Meters (Max) based on cables
Power Source
POE injector/Switch 802.3at/af POE or DC 48V/DC56V power adapter
(order separately)
LED Indication
Ethernet (Green) x 1, Power (Green) x 1,Link (Yellow x 1
Protection
ESD Protection: 30KV, 1KA @ 8/20us
Data Rate
Uplink： Mbps , Downlink：Mbps Uplink：Mbps, Downlink:Mbps
DC Input /DC Output
Input：Adapter DC48V/DC56VC
(0.83A)
Output：DC5V (1.3A),DC 12V (0.8A)
DC Input /POE Output
Input：Adapter DC48V/DC56VC
(0.83A)
Output：POE 48V (11W)
POE Input /DC Output
Input：IEEE 802.3af POE
48V/56V (15W/30W)
Output：DC 5V (1.3A),DC 12V
(0.8A)
POE Input /POE Output
Input：IEEE 802.3at POE
48V/56V (15W/30W)
Output：POE 48V (8.5W)
Switch x MODE POE / DC,VOLTAGE 5V / 12V
Temperature
Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: up to 95%
Dimension mm 88x140x30mm 88x130x30mm
Weight g 280 g 270 g
Rev. A
4
Loading...